Figure 2-2. Switches And Controls - Dell PowerEdge 4200 Installation And Troubleshooting Manual
Dell poweredge 4200 servers: install guide
Hide thumbs
Also See for PowerEdge 4200:
- User manual (132 pages) ,
- Solution manual (114 pages) ,
- Service manual (96 pages)
Table of Contents
Figure 2-2. Switches and Controls
Complete the following procedure to check all the con-
nections and switches:
1.
Turn off the system, including any attached
peripherals (such as the monitor, keyboard,
printer, external drives, scanners, and plotters).
Disconnect all the alternating current (AC) power
cables from their power sources.
2.
If the computer is connected to a power strip,
turn the power strip off and then on again.
Is the power strip getting power?
Yes. Go to step 5.
No. Go to step 3.
3.
Plug the power strip into another electrical outlet.
Is the power strip getting power?
Yes. The original electrical outlet probably does not
function. Use a different electrical outlet.
No. Go to step 4.
2-4
Dell PowerEdge 4200 Systems Installation and Troubleshooting Guide
power indicator
4.
Plug a lamp that you know works into the
electrical outlet.
Does the lamp get power?
Yes. The power strip is probably not functioning
properly. Get another power strip.
No. Go to step 5.
5.
Reconnect the system to AC power.
Make sure that all connections fit tightly together.
6.
Turn on the system.
Is the problem resolved?
Yes. The connections were loose. You have fixed the
problem.
No. Go to step 7.
7.
Is the monitor operating properly?
Yes. Go to step 8.
No. Go to "Troubleshooting the Monitor" in Chapter 6.
8.
Is the keyboard operating properly?
Yes. Go to step 9.
No. Go to "Troubleshooting the Keyboard" in Chap-
ter 6.
diskette-drive
access indicator
power switch
reset button
hard-disk drive
online indicators (6)
hard-disk drive
activity indicators (6)
hard-disk drive
failure indicators (6)
Chapters
Table of Contents
Troubleshooting
