Power Supply Unit - Psu; Removing The Power Supply Unit -Psu - Dell OptiPlex 5260 Service Manual
Hide thumbs
Also See for OptiPlex 5260:
- Stand installation manual (19 pages) ,
- Setup and specifications manual (45 pages) ,
- Installation manual (15 pages)
Table of Contents
4
Install the following components:
a
System board shield
b
Back cover
c
Cable cover
d
Stand
5
Follow the procedure in
Power supply unit - PSU
Removing the power supply unit -PSU
1
Follow the procedure in
2
Remove the following components:
a
Stand
b
Back cover
c
System board shield
d
Base cover
3
To release the PSU cable:
a
Remove the single (M3x5) screw securing the power supply socket to the I/O bracket [1].
b Slide the power supply socket away to remove it from the system [2].
c
Unroute the power supply cables from the retention clips in the chassis [3].
d Disconnect the power supply cable from the socket on the system board [4].
NOTE:
Press the clip downward to release the power supply cable from the system board.
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
59
Table of Contents
