Show Sntp Configuration - D-Link DES-3010GA Cli Manual
Layer 2 switch, managed 8 port 10/100base-tx with gigabit & fiber uplinks
Hide thumbs
Also See for DES-3010GA:
- Cli manual (361 pages) ,
- Web user manual (281 pages) ,
- Manual (348 pages)
Table of Contents
D-Link DES-3010FA/GA CLI Reference Guide
show sntp configuration
The show sntp configuration Privileged EXEC mode command shows the configuration of the Simple Network
Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the current SNTP configuration of the device.
Console# show sntp configuration
Polling interval: 7200 seconds
MD5 Authentication keys: 8, 9
Authentication is required for synchronization.
Trusted Keys: 8, 9
Unicast Clients: Enabled
Unicast Clients Polling: Enabled
Server
-----------
176.1.1.8
176.1.8.179
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast and Anycast Interfaces: 1, 3
Polling
-------
Enabled
Disabled
Page 63
Encryption Key
--------------
9
Disabled
Hide quick links:
Table of Contents
