Table of Contents
INSTALLATION/CONNECTION
Wiring connection
Fuse (10 A)
Ignition switch
Car fuse block
Separate red wire
Make this connection if your vehicle
factory wiring harness does not
have "12 V ignition switch" wire.
Light blue/yellow
To the steering wheel
remote control adapter
Join the same color wires together.
Blue/white: Remote (12 V
350 mA)
Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/For 3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Green: Rear speaker *
/For 3-way crossover: Tweeter (left)
1
Green/black *
1
IMPORTANT
We recommend installing the unit with a commercially available custom wiring harness
specific for your car and leave this job to professionals for your safety. Consult your car audio
dealer.
Antenna terminal
Blue: To power antenna
Blue/white: To amplifier
(Not used)
Vehicle
dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
Brown
You can also connect a
*
1
subwoofer speaker directly
using this lead without
an external subwoofer
amplifier. For setting, 25.
Recommended connection
ENGLISH
39
Hide quick links:
Table of Contents
