Haier HL24XSLW2 Service Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. LCD TV
  5. HL24XSLW2
  6. Service manual

Haier HL24XSLW2 Service Manual

Hide thumbs Also See for HL24XSLW2:
Table of Contents

Quick Links

This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair
the product or products dealt with in this service information by anyone else could result in serious injury or death.
SERVICE MANUAL
Model No.
Service No. HL24XSLW2a
Chassis
WARNING
©2010 Qingdao Haier Electronics Co., Ltd.
All rights reserved. Unauthorized copying and distribution is a violation of law.
Haier Group
Order No.
TV1004S010V0
LCD TV
HL24XSLW2
HL24XSL2
HL24XSL2a
MTK5305
Table of Contents
loading

Related Manuals for Haier HL24XSLW2

Summary of Contents for Haier HL24XSLW2

  • Page 1 Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. ©2010 Qingdao Haier Electronics Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    CONTENTS Chapter 1: General Information 1-1. Document Information ................3 1-2. General Guidelines ................3 1-3. Important Notice ..................3 1-3-1. Follow the regulations and warnings ............. 3 1-3-2. Be careful to the electrical shock ............3 1-3-3. Electro static discharge (ESD) ............... 3 1-3-4.
  • Page 3 4-3. LED Driver Board ................16 4-3-1. Function description:................16 ................16 4-4. LCD Panel ....................16 Chapter 5. Installation Instructions .......... 18 Chapter 6. Operation Instructions .......... 23 6-1. Front Panel Controls ................23 6-2. Back Panel Controls ................23 6-3.

  • Page 4: Chapter 1: General Information

    Service Manual Model No.:HL24XSLW2a Chapter 1: General Information 1-1. Document Information Document format: Adobe PDF Author: Zhou Peng Compiler: Bao Qinghong 1-2. General Guidelines When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

  • Page 5: About Lead Free Solder (Pbf)

    Service Manual Model No.:HL24XSLW2a components commonly are called Electrostatically Sensitive (ES) Devices. The following electros static discharge (ESD). Electrostatically Sensitive (ES) Devices Some semiconductor (solid-state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
  • Page 6 Service Manual Model No.:HL24XSLW2a 1. Always unplug the receiver AC power cord from the AC power source before: a. Removing or reinstalling any component, circuit board module or any other receiver assembly. b. Disconnecting or reconnecting any receiver electrical plug or other electrical connection. c.

  • Page 7: Ordering Spare Parts

    Service Manual Model No.:HL24XSLW2a 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static type solder removal device. Some solder removal devices not 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
  • Page 8 Service Manual Model No.:HL24XSLW2a Caution: A “caution” is used when there is danger that the reader, through incorrect restart(part of) a procedure. Warning: A “warning” is used when there is danger of personal injury. Reference: A “reference” guides the reader to other places in this binder or in this manual, where...
  • Page 9 Service Manual Model No.:HL24XSLW2a Model HL24XSLW2 Screen Size 23.6 inch Aspect Ratio 16:9 Resolution 1920x1080 5 (GRAY TO Response Time (ms) GRAY) Angel of View H:170/V:60 Color Display 16777216 No. of Preset Channels OSD Language English/French/Spanish Color System NTSC Audio System...

  • Page 10: External Pictures (Four Faces)

    Service Manual Model No.:HL22XSLW2a 2-2 External pictures (four faces) Front Side Left Side...
  • Page 11 Service Manual Model No.:HL24XSLW2a Right Side Back Side...

  • Page 12: Chapter 3. Disassemble And Assemble

    Service Manual Model No.:HL24XSLW2a Chapter 3. Disassemble and Assemble 3-1. Remove the Pedestal ④ ③ ① ⑤ ② ① Remover the two screw indicated with ○. ② Turn to front cover upwards ③ ○. Remover pin at the right indicated with ①...

  • Page 13: Remove The Speaker

    Service Manual Model No.:HL24XSLW2a 3-4. Remove the Speaker ① ○. Remover the four screw indicated with ② Then remove the Speaker 3-5. Remove the Keypad Assembly ① remove the Keypad Assembly. 3-6. Remove the Remote Control Board ① ○. Remover the one screw indicated with ②...

  • Page 14: Chapter 4. Location Of Controls And Components

    Service Manual Model No.:HL24XSLW2a Chapter 4. Location of Controls and Components 4-1. Board Location Parts number Description DC1BB0E0200M Main Board ( 0090723236) A board DC1BB0E0100M Main Board ( 0090723236) 0090724659 LED Driver Board B board 4-2. Main Board...

  • Page 15: Function Description

    Service Manual Model No.:HL24XSLW2a 4-2-1 Function Description: Main Board Main board connector Power connectors (CN1) Pin number Signal name +12V +12V Notes: CN1-Pin 3: Backlight on/off: The system can turn on or turn off the backlight of TFT LCD Panel through the power supply unit path.
  • Page 16 Service Manual Model No.:HL24XSLW2a LVDS Connector (CN5) Pin number Signal name Description LVDS_D0E_N LVDS EVEN 0 - Signal LVDS_D0E_P LVDS EVEN 0 + Signal Ground LVDS_D1E_N LVDS EVEN 1 - Signal LVDS_D1E_P LVDS EVEN 1 + Signal Ground LVDS_D2E_N LVDS EVEN 2 - Signal LVDS_D2E_P LVDS EVEN 2 + Signal Ground...

  • Page 17: Led Driver Board

    Service Manual Model No.:HL24XSLW2a 4-3. LED Driver Board 4-3-1. Function description: To supply power for Panel. INPUT CONNECTOR (CNC1) Power supply and Inverter Connector CNC1 number Signal name Description Ground Ground Power Power Other Connector Power supply for panel (CNC2) Power supply for panel (CNC3) 4-4.
  • Page 18 Service Manual Model No.:HL24XSLW2a Panle LVDS Connector (CNC4)

  • Page 19: Chapter 5. Installation Instructions

    Service Manual Model No.:HL24XSLW2a Chapter 5. Installation Instructions Accessories Antenna Connection Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket Bronze Wire RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten UHF Antenna...
  • Page 20 Service Manual Model No.:HL24XSLW2a Connection Option 1 Note Set VCR output switch to channel 3 or 4 and then tune If your DVD player does not have the TV to the same channel number. component video output, use S-Video. Connection Option 2 L -AUDIO- R Connect the audio and video cables from the VCR’s output jacks to the TV input jacks, as shown in the...
  • Page 21 Service Manual Model No.:HL24XSLW2a How to use VIDEO L -AUDIO- R ANT IN Turn on the computer and the TV. Use INPUT on the remote control to select VGA or HDMI source. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode.
  • Page 22 Service Manual Model No.:HL24XSLW2a How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the source device does not support Auto HDMI, you need to set the output resolution appropriately.
  • Page 23 Service Manual Model No.:HL24XSLW2a Analog Audio Cable (Stereo to RCA type) (not supplied with the product) Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programmer without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set.

  • Page 24: Chapter 6. Operation Instructions

    Service Manual Model No.:HL24XSLW2a 6. Operation Instructions 6-1 Front panel controls INPUT MENU VOL- VOL+ POWER 1 POWER Press to turn on and off the TV. Press to access the input source mode. Press repeatedly to change the source to the one 2 INPUT you want to watch.
  • Page 25 Service Manual Model No.:HL24XSLW2a Battery loading 1. Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. Precautions As strong light may interfere the signals, change your Make sure that two AAA alkaline batteries are loaded.

  • Page 26: Chapter 7. Electrical Parts

    Service Manual Model No.:HL24XSLW2a Chapter 7. Electrical Parts 7-1. Block Diagram HDMI1 MT5305 Main IC TDA1517 YPbPr tuner LVDS Composite YPbPr Composite Flash VGA(P11)L/R EEPROM...

  • Page 27: Wiring Connection Diagram

    Service Manual Model No.:HL24XSLW2a 7-2 .Wiring Connection Diagram...

  • Page 28: Circuit Diagram

    Service Manual Model No.:HL24XSLW2a 7-3 .Wiring Connection Diagram...
  • Page 29 Service Manual Model No.:HL24XSLW2a...
  • Page 30 Service Manual Model No.:HL24XSLW2a...
  • Page 31 Service Manual Model No.:HL24XSLW2a...
  • Page 32 Service Manual Model No.:HL24XSLW2a...
  • Page 33 Service Manual Model No.:HL24XSLW2a...
  • Page 34 Service Manual Model No.:HL24XSLW2a...
  • Page 35 Service Manual Model No.:HL24XSLW2a...
  • Page 36 Service Manual Model No.:HL24XSLW2a...
  • Page 37 Service Manual Model No.:HL24XSLW2a...
  • Page 38 Service Manual Model No.:HL24XSLW2a...
  • Page 39 Service Manual Model No.:HL24XSLW2a...
  • Page 40 Service Manual Model No.:HL24XSLW2a...

  • Page 41: Chapter 8. Measurements And Adjustments

    Service Manual Model No.:HL24XSLW2a Chapter 8. Measurements and Adjustments 8-1. Service Mode 8-1-1.How to enter into Service Mode The way to the factory mode menu: Step 1: Press Menu, Step 2: Input 8893, Step 3: Press “OK” System will be into the factory mode menu when 3 steps above are done. 8-1-2.How to exit If you want to exit this factory menu, please press the button ”Exit”...

  • Page 42: Video

    Service Manual Model No.:HL24XSLW2a 8-2-2. Video Auto Color The option could only be used in the VGA and Component model. When we found the color in the two models was abnormal. Then we can use the function to adjust it automatically. Color Temperature The function could adjust the Color Temperature, used when debugging...

  • Page 43: Audio

    Service Manual Model No.:HL24XSLW2a 8-2-3. Audio Dolby Banner: When turn it “ON”, the model will be in Dolby authentication state. Compression: Compression style. RF atv line AV/S-Video/YPbPr/VGA Compression Factor: Compression state. Downmix: output model. MTS System: used when debugging. The parameters only used when 8-2-4.
  • Page 44 Service Manual Model No.:HL24XSLW2a Factory Scan: According to ANTENNA-ANALOG---ANTENNA-DIGITAL---CABLE- ANALOG---CABLE- DIGITAL to search channels, used only in project debugging. Tuner Diagnostic: Project debugging setting, used to inspect the audio function.

  • Page 45: Gamma

    Service Manual Model No.:HL24XSLW2a 8-2-5. Gamma Gamma: Bright GAMMA0.8 Middle default settings in the program Dark GAMMA1.2 8-2-6. Backlight Backlight: adjust the backlight.

  • Page 46: Function

    Service Manual Model No.:HL24XSLW2a 8-2-7. Function Burning Mode: Turn it “ON” to enter the aging model, This is for factory run-in testing. The screen would display red, green, blue and black screen repeatedly. Each color screen could be exam at that time. Clean Storage The function could make the model turn back to the factory default setting.
  • Page 47 Service Manual Model No.:HL24XSLW2a Remark: The date of the chart only is an example, please don’t adjust the factory mode base on it.

  • Page 48: Chapter 9. Trouble Shooting

    Service Manual Model No.:HL24XSLW2a Chapter 9. Trouble shooting 9-1. Simple check Verify if the television is properly plugged Verify if the television is properly supplied power No picture/ No sound Verify if electricity is available. Verify if correct signals are input Press INPUT button to change signal input to TV input Blank screen Restart the television of power supply is interrupted...

  • Page 49: Power Supply Board Failure Check

    Service Manual Model No.:HL24XSLW2a 9-2. Power Supply Board Failure Check.

  • Page 50: Mainboard Failure Check

    Service Manual Model No.:HL24XSLW2a 9-3. Mainboard Failure Check Symptom: No Sound No Sound (All Mode) Fail Check the input Change Source input Source Pass Fail Check Re-soldering or change input/output IC U13 Pass Fail Check Re-soldering or change input/output IC U55 Pass Fail Check...

  • Page 51: Pannel Failure

    Service Manual Model No.:HL24XSLW2a 9-4. Pannel Failure Failure Mode...
  • Page 52 Service Manual Model No.:HL24XSLW2a...
  • Page 53 Service Manual Model No.:HL24XSLW2a...
  • Page 54 Service Manual Model No.:HL24XSLW2a...
  • Page 55 Service Manual Model No.:HL24XSLW2a...
  • Page 56 Sincere Forever Haier Group Haier Industrial Park, No.1, Haier Road 266101, Qingdao, China http://www.haier.com Printed in China...

This manual is also suitable for:

Hl24xsl2

Table of Contents