Adjusting The Volume - Panasonic WX-LT350 Operating Instructions Manual

The microphone can control the volume of audio signals that are output from the infrared

receiver (WX-LR100, WX-LR100/A, WX-LR100/B), the infrared receiver/amplifier (WX-LA20, WX-

LA50), and the infrared wireless powered speaker (WX-LP100), and the volume of audio sig-

nals input to the line input terminal of the infrared receiver/amplifier (WX-LA50) and the infrared

wireless powered speaker (WX-LP100) (as of June 2009).

After adjusting the volume level at the infrared receiver and any connected external devices,

the speaker can make fine adjustments, such as level differences, by performing the following

operations on the microphone.

1

Press the selector button

When the selector button is pressed for the first time after turning on the power, the [OWN]

selection indicator lights, and after that the selection indicator for the preceding selection

([OWN], [OTHER], [LINE]) will light. Then press the selector button repeatedly to select the

desired selection. The selection indicators light in the following order:

OWN

* The selection indicator lights for 5 seconds. If no operation takes place within this period,

the indicator turns off automatically.

2

Press the volume button [D/C]

While the selection indicator for the selection made in 1 is lit, either press the volume button

or keep it pressed.

Pressing the volume button [D] will increase the volume, pressing [C] will decrease it. The

adjustment range is +6 dB to –16 dB, and every pressing corresponds to a change of

2 dB.

The selection indicator goes off 5 seconds after the volume button was pressed for the last

time.

• When [OWN] is lit

Adjust the audio volume of this microphone (input from the microphone opening, exter-

nal input and microphone input).

* Adjustment is not possible while muted ([OWN] selection indicator is blinking).

16

Selection indicator

1

Selector button

OTHER

LINE

WX-LT350

Volume button

BATT

CHG

PWR

2