General Information On Damage To Property And Products; Transport And Storage - Bosch Rexroth PSI 6 Series Operating Instructions Manual

Weld timer with medium-frequency inverter
Hide thumbs Also See for Rexroth PSI 6 Series:
Table of Contents
Available languages

Available languages

1070080028 / 08
|
PSI 6xxx
3
General information on damage to property and
products
3.1

Transport and storage

General information on damage to property and products

The present section includes information which is important for protec­
tion against damage to property and products.
Improper handling of devices with water cooling
Leakage in the cooling circuit possible!
"
Make sure that the water connections and hose bridges (hose
bridge: refer to fig. 63: page 358) are never pressed or squeezed
when lifting the device from the transport packaging or during
transport.
"
Never pull the hose bridge.
Frost, corrosion
Possibility of leak in the heat sink, contamination of the cooling
agent!
"
Make sure that the cooling system is fully drained prior to storage.
Please note the maximum storage temperature range of all
"
components (refer to information provided in the technical data).
Defective or spent batteries
Possibility of damage due to defective (leaked) batteries and loss
of information stored in the RAM!
"
Make sure that a backup of important timer data is made prior to its
storage.
The data in the RAM will be lost when the buffer battery is spent.
For storage of the product (> 2 years), please remove the battery
"
provided as RAM buffer.
Bosch Rexroth AG
NOTICE
255 / 460

Chapters

Table of Contents
loading

Table of Contents