RAM TRUS-T-LIFT Supplemental Manual
Hide thumbs
Also See for TRUS-T-LIFT:
- Installation manual (32 pages) ,
- Supplemental manual (13 pages) ,
- Supplemental manual (11 pages)
Table of Contents
Quick Links
Table of Contents
Related Manuals for RAM TRUS-T-LIFT
Summary of Contents for RAM TRUS-T-LIFT
- Page 1 TRUS-T-LIFT SUPPLEMENTAL MANUAL #3 TALL TOWER TTL...
- Page 2 RAM Elevators + Lifts 1-800-563-4382...
-
Page 3: Table Of Contents
Section 3: Tall Tower ..........................3 3.1: Hoisting and Positioning ......................... 4 3.2: Anchoring the Tower ........................6 3.2.1: Top Tower Anchoring (Standard).................... 6 3.2.2: Side Tower Anchoring (Optional) ................... 7 3.2.3: 90 Degree Tower Anchoring (Optional) ................8 1-800-563-4382 RAM Elevators + Lifts... -
Page 4: Section 1: Introduction
This supplemental manual has been provided to walk you through the safe and efficient installation of a Trus-T-Lift Tall Tower Model. Please read this manual, as well as the main installation manual, thoroughly before installing and operating your lift. We recommend your lift and any add-ons be installed and serviced by a qualified technician. -
Page 5: Safety Notes
The lift is intended for use by people and not to be used for cargo or other purposes. Lifting capacity is up to a maximum of 750 lb. unless otherwise noted on the lift and in RAM’s supplied documentation. (DO NOT OVERLOAD THE LIFT). Overloading the lift will render RAM’s warranty null and void. -
Page 6: Section 3: Tall Tower
Section 3: Tall Tower RAM Elevators + Lifts 1-800-563-4382... -
Page 7: Hoisting And Positioning
1) Wrap the straps around the front rectangular tube as shown in the below diagram ( A ), approximately 5” in from the tower sides. Cautio n! Failure to use the recommended locations can produce unpredictable results. Confirm proper placement before attempting lift. 1-800-563-4382 RAM Elevators + Lifts... - Page 8 Detail B: 500lb Capacity Lifting Straps 2) Lift the tower until it sits flat on the ground near the lift’s final location. 3) Fasten the lift’s legs onto the tower as described in the main Trus-T-Lift manual in section Base Frame 4.1: “...
-
Page 9: Anchoring The Tower
Do not anchor the lift tower to the wall unless you have completed sections 4.1 - 4.9 of the main Trus-T-Lift manual, as well as the installation any landing devices as described in “Trus-T-Lift Supplemental Manual #2 – Landing Devices”... -
Page 10: 2: Side Tower Anchoring (Optional)
RAM. This kit comes with the mounting bracket, magnetic spacer, bolts and anchors, and a drill bit and tap. -
Page 11: 3: 90 Degree Tower Anchoring (Optional)
3.2.3: 90 Degree Tower Anchoring (Optional) In the event that there is no suitable travel wall directly behind the lift, RAM offers a 90 Degree Tower Anchoring Bracket, which allows the tower to be mounted to the lift’s travel wall.