Connections And Cabling; Network Cable Installation Warning; Serial Connection To The Console Port; Serial Connection Default Settings - Nokia Alcatel-Lucent OmniSwitch 6360 Hardware User's Manual
Hide thumbs
Also See for Alcatel-Lucent OmniSwitch 6360:
- User manual (174 pages) ,
- Manual del usuario (173 pages) ,
- User manual (153 pages)
Table of Contents
Getting Started
Connections and Cabling
Once your switch is properly installed, you should connect all network and management cables required for
your network applications. Connections may include:
Console connector
•
Cables to NIs or transceivers
•
Network Cable Installation Warning
Never install exposed network cables outdoors. Install network cables per manufacturer requirements.
Serial Connection to the Console Port
The console port provides a serial connection to the switch is required when logging into the switch for the
first time. By default, this connector provides a DCE console connection.
Serial Connection Default Settings
baud rate
parity
data bits (word size)
stop bits
For information on modifying these settings, refer to the Switch Management Guide.
OmniSwitch 6360 Hardware Users Guide
9600
none
8
1
April 2021
Connections and Cabling
page 2-5
Hide quick links:
Table of Contents
