Table of Contents
• When the system OETF and input signal OETF are
set to [HLG], [PQ], [S-Log3 (HDR)], or [S-Log3
(Live HDR)], [Black Level (HDR)] cannot be set.
[HDR Converter] window > [Conversion]
tab
Sets the mode for conversion from HDR to HDR, SDR to
HDR, or HDR to SDR.
Note
This cannot be set when the system OETF and input signal
OETF are set to [SDR].
When converting from HDR to HDR
Enable/disable the black clip function using the [HDR
Black Clip] button.
On: Enable the black clip function.
Off: Disable the black clip function.
Note
This cannot be set when the system OETF is set to [S-Log3
(HDR)] or [S-Log3 (Live HDR)].
When converting from SDR to HDR
1
Enable/disable the highlight creation function using
the [Highlight Creation] button.
On: Enable the highlight creation function.
Press the [Point (Abs.)] button and select a knee
point position for the curve from the pull-down
list.
Press the [Slope (Abs.)] button and select a slope
for the curve from the pull-down list.
Off: Disable the highlight creation function.
Note
This cannot be set when the input signal conversion
mode is set to [Display Referred].
2
Press the [HDR Gain (dB)] button and enter a gain for
converting in the numeric keypad window.
3
In the [De-Gamma] group, set the type of gamma
curve for the inverse conversion.
Standard: Use standard.
Press the button on the right of the [Standard]
button and enter a table number (1 to 7) in the
numeric keypad window.
Hyper: Use hypergamma.
Press the button on the right of the [Hyper] button
and enter a table number (1 to 4) in the numeric
keypad window.
Note
This cannot be set when the input signal conversion
mode is set to [Display Referred].
4
Enable/disable the black clip function using the [HDR
Black Clip] button.
On: Enable the black clip function.
Off: Disable the black clip function.
Note
This cannot be set when the system OETF is set to [S-
Log3 (HDR)] or [S-Log3 (Live HDR)].
When converting from HDR to SDR
1
Enable/disable the knee function using the [Knee]
button.
On: Enable the knee function.
Press the [Point (Abs.)] button and select a knee
point position for the curve from the pull-down
list.
Press the [Slope (Abs.)] button and select a slope
for the curve from the pull-down list.
Off: Disable the knee function.
2
Enable/disable the white clip function using the
[White Clip] button.
On: Enable the white clip function.
Press the button on the right of the [White Clip]
button and enter a video signal level in the numeric
keypad window.
Off: Disable the white clip function.
3
Press the [SDR Gain (dB)] button and enter a gain for
converting in the numeric keypad window.
4
In the [Gamma (Table)] group, select a type of gamma
curve.
Standard: Use standard.
Press the button on the right of the [Standard]
button and enter a table number (1 to 7) in the
numeric keypad window.
Press the [Step] button and enter a gamma strength
(step) in the numeric keypad window. The effect
changes in increments of 0.05.
Press the [Level] button and enter a gamma
strength (level) in the numeric keypad window.
Hyper: Use hypergamma.
Press the button on the right of the [Hyper] button
and enter a table number (1 to 4) in the numeric
keypad window.
294
- Quick Links:
- Control Panel Configuration
Hide quick links:
Table of Contents
