Summary of Contents for Fehling Instruments CERAMO CONCEPT X PUNCHES
Page 1
FEHLING M 11 INSTRUMENTS ASSEMBLY INSTRUCTIONS 1-01/10 ® CERAMO CONCEPT X PUNCHES Disassembly a) For disassembly place the punch on a solid worktop. Unscrew the hex head screw (pos.1) by turning it clockwise using the supplied screwdriver TXX-0X, and remove. b) Pull the anterior handle element (pos.2) downward to separate it from the punch body (pos.
Page 2
FEHLING M 11 INSTRUMENTS ASSEMBLY INSTRUCTIONS 1-01/10 Only components belonging to the same unit may be assembled, with the exception of the screw which fits all punches. Component compatibility can be verified by means of the identi- fication number (pos.5) that is marked on all components (except the screw). NOTE: Before assembling the contact areas (pos.
Page 3
FEHLING M 11 INSTRUMENTS ASSEMBLY INSTRUCTIONS 1-01/10 The screwdriver TXX-0X and the fitting device TXW-6X can be cleaned with warm water and a mild detergent. Hot water and steam sterilisation at 134°C can destroy screwdriver and fitting device. FEHLING Hanauer Landstr. 7A · 63791 Karlstein/Germany · www.fehling-instruments.de ...