Connector Specifications, page A-6 • Technical Specifications This section lists the switch technical specifications in Table A-1 Technical Specifications for the Catalyst Express 500 Switches Specification Description AC input voltage Catalyst Express 500-24TT: 100 to 240 VAC, 1.3–0.8 A (autoranging), 50 to 60 Hz Catalyst Express 500-24LC: 100 to 240 VAC, 2–1 A (autoranging), 50 to 60 Hz...
Page 2
Catalyst Express 500G-12TC: 0.075 KVA Power over Ethernet All 24 PoE ports on the Catalyst Express 500-24PC can supply up to 15.4 W (IEEE 802.3af standard maximum) of power over Category 5 cable, for a total of 370 W of inline power.
Appendix A Reference Table A-1 Technical Specifications for the Catalyst Express 500 Switches (continued) Specification Description Dimensions 1.73 x 17.5 x 9.9 in. (4.39 x 44.45 x 25.15 cm) for Catalyst Express (H x W x D) 500-24TT, Catalyst Express 500-24LC, and Catalyst Express 500G-12TC 1.73 x 17.5 x 14.4 in.
Page 4
MMF cable on both the sending and receiving ends of the link. The mode-conditioning patch cord is required for link distances greater than 984 feet (300 m). User Guide for the Catalyst Express 500 Switches Core Size Fiber Type (micron) G.652...
Page 5
A-5. Use the Cisco part Cisco Part Number CAB-CP-LCSC-2M CAB-CP-SCLC-8IN CAB-SMF-SC-10 CAB-SMF-SC-100 CAB-SMF-SC-25 CAB-SMF-SC-50 CAB-SMF-SC-75 Cisco Part Number 15454-LC-LC-2= 15216-LC-LC-5= 15216-LC-LC-10= 15216-LC-LC-20= Cisco Part Number CSS5-CABSX-LC= CSS5-CABSX-LCSC= User Guide for the Catalyst Express 500 Switches Cabling Guidelines Table A-4. For...
Connector Specifications Connector Specifications This section describes the connectors used with the Catalyst Express 500 switches. 10/100 and 10/100/1000 Ports The Ethernet ports on the switches use standard RJ-45 connectors and Ethernet pinouts with internal crossovers Figure A-1 User Guide for the Catalyst Express 500 Switches...