Sanden Vendo BB01 Programming Manual
  1. Manuals
  2. Brands
  3. Sanden Manuals
  4. Vending machines
  5. Vendo BB01
  6. Programming manual

Sanden Vendo BB01 Programming Manual

For vending machine 100; 101; 169; 189; 217; 218; 220; 254; 258 320-611-701-811-minivendor
Hide thumbs
Table of Contents

Quick Links

Mod. 100-101-169-189-217-218-220-254-258
320-611-701-811-Minivendor
SandenVendo Italian Branch
Regione Cavallino, 2
15030 Coniolo (AL) – ITALIA
Tel.: +39 0142 335111 – Fax: +39 0142 562348
website: www.sandenvendo.com
PROGRAMMING MANUAL
BOARD BB01
VENDING MACHINE
Revision: 06
Date: 28/10/2014
Code : 395117
Table of Contents
loading

Related Manuals for Sanden Vendo BB01

Summary of Contents for Sanden Vendo BB01

  • Page 1 PROGRAMMING MANUAL BOARD BB01 VENDING MACHINE Mod. 100-101-169-189-217-218-220-254-258 320-611-701-811-Minivendor SandenVendo Italian Branch Revision: 06 Regione Cavallino, 2 Date: 28/10/2014 15030 Coniolo (AL) – ITALIA Code : 395117 Tel.: +39 0142 335111 – Fax: +39 0142 562348 e-mail: [email protected] website: www.sandenvendo.com...
  • Page 2 15030 Coniolo (AL) Italy Tel.:+ 39 0142 335111 Fax.:+ 39 0142 562348 e-mail: [email protected] www.sandenvendo.com SandenVendo German Branch of Sanden International (Europe) Limited (SVG) Spangerstrasse 22 40599 Dusseldorf Germany Tel.: + 49 211 740390 Fax: + 49 211 7488541 e-mail: [email protected]...

  • Page 3: Table Of Contents

    Instructions for programming BB01 Board functions 1 GENERAL WARNINGS ....................3 1.1 Purpose of this manual ....................3 1.2 To whom this manual is addressed................3 1.3 Responsibility......................5 1.4 Manufacturer.......................5 1.5 Service centers ......................6 1.6 Warranty ........................6 1.7 General safety warnings .....................7 2 SPECIFICATIONS FOR ELECTRONIC BOARD BB01 ..........10 2.1 Hardware Feature .....................10 2.2 Software Feature ......................10 3 USAGE OF THE SELECTION SWITCHES IN THE SERVICE MODE......13...
  • Page 4 Instructions for programming BB01 Board functions 5.7.9 ST9 MIS Reset....................25 5.7.10 ST10 Location code (programmable via windex program)........25 5.7.11 ST11 Revaluation with Coins to Cashless ............25 5.8 Coin Acceptor Parameter Setting................25 5.9 Return to normal mode door open state routine............25 6 ADDITIONAL INFORMATION ..................26 6.1 Column filled with products but sold out lamp lit ............26 6.2 How to bring vend motors in end position ..............26...

  • Page 5: General Warnings

    Instructions for programming BB01 Board functions 1 GENERAL WARNINGS 1.1 Purpose of this manual The manual contains the correct procedures for programming of the Vending Machine. This manual is an integral part of the machine and must therefore be kept intact and available to hand for the machine’s entire productive life.
  • Page 6 Instructions for programming BB01 Board functions Technicians allowed to operate this vending machine: Installer/ Maintenance / Specialized  technician o The intervention of the maintenance technician is required for all those operations where the lower protection carter must be opened: when carter is removed all operations must be done only by SandenVendo personnel or by authorized technicians (trained and informed) and not by...

  • Page 7: Responsibility

    The manufacturer’s responsibility is confined to the correct use of the machine, in the limits indicated in this manual. declines all Sanden International (Europe) Limited responsibility for any damages caused to persons and/or property as the result of: - Incorrect installation...

  • Page 8: Service Centers

    Instructions for programming BB01 Board functions 1.5 Service centers Sanden International (Europe) Limited represented by a valid and prepared sales network in both Italy and Europe (see inner cover page). 1.6 Warranty The warranty on the Vending Machine components, starting from the date shown on the delivery note, is for 24 months for the cooling system.

  • Page 9: General Safety Warnings

    Instructions for programming BB01 Board functions 1.7 General safety warnings  Carefully read the manual before starting or loading the vending machine  Protect the vending machine against weather conditions  Only maintenance technicians should remove the protective covers  Always read the programming manual before operating the electronic board settings ...
  • Page 10 Instructions for programming BB01 Board functions  This machine is not suitable for outside installation  To prevent hazards due to machine instability, secure the machine according to the instructions  In case of a failure and/or poor operation, only seek help of the qualified personnel of our service centers.
  • Page 11 Sanden International (Europe) Limited recalls that the technical and performance of products can change without notice. Sanden International (Europe) Limited reserves the right of making changes on their vending machines without any advice; moreover they declare that the vendors listed in this manual are in conformity with the following directives: 98/37/CE (EC markings).

  • Page 12: Specifications For Electronic Board Bb01

    Instructions for programming BB01 Board functions 2 SPECIFICATIONS FOR ELECTRONIC BOARD BB01 2.1 Hardware Feature This board called BB01 has all functions inboard. Power supply : 24 Volt AC 6 A rms 26 Volt DC NO FILTERED 4 A rms 10 Volt AC 1,5 A rms 10 motor outputs 24 VAC 6 Amp rms 10 motor micro-switches...
  • Page 13 Instructions for programming BB01 Board functions © SandenVendo...
  • Page 14 Instructions for programming BB01 Board functions © SandenVendo...

  • Page 15: Usage Of The Selection Switches In The Service Mode

    Instructions for programming BB01 Board functions 3 USAGE OF THE SELECTION SWITCHES IN THE SERVICE MODE  Selection Switch No.1 Escape or Cancel Home  Selection Switch No.2 Next or increase  Selection Switch No.3 Previous or Decrease Down  Selection Switch No.4 Accept or Enter Enter...

  • Page 16: Service Routine

    Instructions for programming BB01 Board functions 4 SERVICE ROUTINE In the service mode, information such as sales by selection, total sales, total cash flow through the machine, and diagnostic error codes can be accessed by using the selection buttons and the electronic display. In addition, storage column assignments and vend pricing can be set in this mode using the same techniques.

  • Page 17: Error Routine

    Instructions for programming BB01 Board functions 4.1 Error routine If the ENTER button is activated at the "EROR" prompt the VMC will enter in the error routine. If no errors have occurred since the last error reset the display will show a "NONE"...

  • Page 18: Vend Mechanism Error Routine

    Instructions for programming BB01 Board functions 4.1.2 Vend Mechanism error routine If the ENTER button is activated at the "VEND" prompt the VMC will display a "HSXX" message where "XX" indicates the first column that has been detected with a home sensor error.

  • Page 19: Chute Sensor Error Routine

    Instructions for programming BB01 Board functions 4.1.6 Chute sensor error routine If the ENTER button is activated at the "CHUT" prompt the VMC will display a "CS" message indicating a chute sensor error. If the ENTER button is pressed and held for two seconds during the "CS" error code, that code will be cleared.

  • Page 20: Test Vend Routine

    Instructions for programming BB01 Board functions 4.4 Test vend routine If the ENTER button is activated at the "TEST" prompt the VMC will enter the test vend routine. Upon entry into this routine the display will show a "CO 1" message indicating that a test vend of column 1 may be initiated.

  • Page 21: Space To Sales Setting Routine

    Instructions for programming BB01 Board functions The display will show a "PR 1" message where the "1" indicates the column. Using UP and DOWN buttons will cycle through available column prices. Activation of the ENTER button will allow access to the displayed column current price. Using UP and DOWN button will increase or decrease the price by one lowest coin value respectively.

  • Page 22: C1 Single Price / Multi Price

    Instructions for programming BB01 Board functions The following information describes the various machine configuration settings 5.5.1 C1 Single price / Multi price This setting is used to enable the single price mode. In this mode, all columns prices are set to the value that is entered into the selection 1 price filed in the service mode. At the prompt, "C1", after the activation of the ENTER button if the value = 1 the VMC is in the single price mode.

  • Page 23: C5 Post Or Pre-Payment

    Instructions for programming BB01 Board functions 5.5.5 C5 Post or pre-payment (only MDB) This parameter determines if the VMC allow return coins without vend 1 No Forced Vend (you can obtain the exchange without make a selection) 0 Forced vend (you must make a selection) 5.5.6 C6 &...

  • Page 24: C10 Reset To The Factory Default Value

    Instructions for programming BB01 Board functions 5.5.8 C10 Reset to the factory default value Be careful using this option you lose all the configuration parameters on the machine, and reset all the counters (also the total counter). The valid value for this menu are: 18 for 9 selection machine 19 for 5 selection machine 20 for 6 selection machine...

  • Page 25: C12 Accepted Banknotes In Low Change Condition

    Instructions for programming BB01 Board functions 5.5.10 C12 Accepted banknotes in low change condition (only MDB from Software version BBM 2.23) This parameter is used for determining the acceptance of up to 8 bills (depending on the bill validator program) when the changer is in low change condition. Bill 1 is assumed to be the smallest in value, 8 the highest bill Each bill has a binary value as In C12...

  • Page 26: St1 Identification Number Of Vmc

    Instructions for programming BB01 Board functions 5.7.1 ST1 Identification number of VMC ST1 = Machine identification number 5.7.2 ST2 Area identification number of VMC ST2 = Machine area number (for Audit) 5.7.3 ST3 Message of VMC ST3 = 0 No Message (The Credit 0 is blinking) ST3 = 1 Customer Message 1 ST3 = 2 Customer Message 2 5.7.4 ST4 Counter Clearing...

  • Page 27: St6 Motor Reset After Door Close

    Instructions for programming BB01 Board functions 5.7.6 ST6 Motor Reset After Door Close ST6 = 0 no reset after door close ST6 = 1 if a motor is not in home position the VMC reset the motor after door close 5.7.7 ST7 Coin Changer Keypad Managing ST7 = 0 Key pad changer inhibited ST7 = 1 Key pad changer used allowed...

  • Page 28: Additional Information

    Instructions for programming BB01 Board functions 6 Additional Information 6.1 Column filled with products but sold out lamp lit If after correct programming of the Space To Sales menu sold out lamps are lit, all errors must be cleared as follows: 1.

  • Page 29: Vidts File Generated By Vmc

    Instructions for programming BB01 Board functions 7 VIDTS file Generated by VMC(BBMDEX-BBFDEX) PA1*8*100* F20036000005201999130720525990856 PA2*0*0*0*0* DXS*ASC0010001*VA*V1/1*1*PV4/0/4 PA5***0* ST*001*0001*052599084406 PA1*9*100* ID1**BB01*5.00***266 PA2*0*0*0*0* ID4*0039*10* PA5***0* VA1*300*3*300*3* PA1*0*100* CA1*FAG12345678901200000CG4400S* PA2*0*0*0*0* BA1*CBV000000000000125*EGYPT**** PA5***0* DA1** LE*0001 CA3*30*0*0*30*30*0*0*30 EA2*DO*1* CA4*0*0*0*0 EA2*CR*0* CA8*0*0 MA5*ERROR* CA10*0*0 MA5*BAUD*9600 DA2*0*0*0*0 MA5*TUBE1**0*0*1*0*4*0*0*0* TA1*0*0*0*0* MA5*TUBE2**0*0*0*0*0*0*0*0*...

  • Page 30: Service Routine Diagram

    Instructions for programming BB01 Board functions 8 Service Routine Diagram 2 nd MAIN 1 st SUB DESCRIPTION MENU MENU MENU EROR COLJ CJXX XX column jammed VEnd hSXX XX home position error door door open SELS SSXX XX selection switch always close CHar Changer comunication error Tube sensor error...
  • Page 31 Instructions for programming BB01 Board functions 1 st 2 nd MAIN DESCRIPTION MENU MENU MENU CONF 1=single price - 0=multi price Low change equation 0 to 14 Low change level 0 to 10 1=single vend - 0=multi vend 1=escrow allowed - 0=forced vend Accepted coins 0-255 Accepted coins 0-255 Accepted coins in low change 0-255...
  • Page 32 Instructions for programming BB01 Board functions 9 ANNEXE SOFTWARE VERSIONS BB01 BBM DEX 5.17 or higher For 5-digit LED display Cashless systems and DEX Audit supported Coin & bill acceptance automatically managed by VMC The VMC accept or reject automatically bills according to the coin tubes inventory BBF DEX 4.45 ST or BBF DEX 4.45 CC or higher For 2 line fluorescent display Cashless systems and DEX Audit supported...
  • Page 33 © SandenVendo...
  • Page 34 28.10.2014 Update Address page Update CONF C11 & C12 22, 23 Update Annexe Software BB01 © SandenVendo...

Table of Contents