System Health And System Id Indicator Codes - Dell EMC PowerEdge XR11 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge XR11:
- Installation and service manual (124 pages) ,
- Installation and service manual (126 pages)
Table of Contents
Available languages
Available languages
Table 31. Status LED indicators and descriptions (continued)
Icon
Description
Memory indicator The indicator turns solid amber if a
PCIe indicator
System health and system ID indicator codes
The system health and system ID indicator is located towards the left control panel of the system for Rear Accessed
configuration and towards the right control panel of the system for Front Accessed configuration.
Figure 114. System health and system ID indicator
114
Sistem tanılamaları ve gösterge kodları
Condition
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Corrective action
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the
Getting help
section.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help
section.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help
section.
NOTE:
For more information about the
supported PCIe cards, see the Expansion card
installation guidelines section.
Table of Contents
