Related Manuals for Kanardia INDU 80
Summary of Contents for Kanardia INDU 80
- Page 1 Altimeter INDU 80 — Manual Kanardia d.o.o. February 2015 © Kanardia d.o.o. Revision 1.0...
- Page 2 //creativecommons.org/licenses/by-sa/3.0/. In short, the license gives you right to copy, reproduce and modify this document if: X you cite Kanardia d.o.o. as the author of the original work, X you distribute the resulting work only under the same or similar license to this one.
-
Page 3: Table Of Contents
3.1 Two Years Warranty ....... . 3.2 TSO Information — Limited Operation ..... © Kanardia 2015... -
Page 4: Introduction
Internal logger storage cca. 6500 hours before overlapping, 1 sec interval Communication CAN bus, 29 bit header, 500 kbit, Kanardia protocol Table 1: Basic technical specifications. Options The instrument can be delivered with two different scales. One scale is in feet and the other scale is in meter. -
Page 5: Installation & Maintenance
flat. It is highly recommended that the instrument panel is mounted using rubber shocks, which reduce the vibrations. Figure 2 illustrates the mounting hole. Connections Figure 3 illustrates all connections at the back side of the instrument. © Kanardia 2015... -
Page 6: Static Connection
It is highly recommended to keep the static tubing as short as possible. The tubing must avoid sharp bends and twists. The tubing must be airtight. Water must not be allowed to enter the tubing. © Kanardia 2015... -
Page 7: Can Bus Connection
At the same time it will serve as a data logger - it will log most of relevant information provided on the bus. Use standard RJ45 ethernet cable to connect it with other Kanardia equipment. 2.2.3 Illumination Optional illumination knob can be connected to the back of the instrument. -
Page 8: Limited Conditions
This Limited Warranty applies only to hardware products manufactured by or for Kanardia that have the ”Kanardia” trademark, trade name, or logo affixed to them at the time of man- ufacture by Kanardia. The Limited Warranty does not apply to any non-Kanardia hardware products or any software, even if packaged or sold with Kanardia hardware. -
Page 9: Tso Information - Limited Operation
This product is not TSO approved as a flight instrument. Therefore, the manufacturer will not be held responsible for any damage caused by its use. The Kanardia is not responsible for any possible damage or destruction of any part on the airplane caused by default operation of instrument.