Removing The Working Coil Plate And Working Coil - LG LSE4617ST Service Manual
30” electric range
Hide thumbs
Also See for LSE4617ST:
- Owner's manual (124 pages) ,
- Owner's manual (132 pages) ,
- Technical manual (183 pages)
Table of Contents
REMOVING THE WORKING COIL PLATE AND
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Pull the controller from the range. (See page 3-4)
4. Pull the Cooktop from the range. (See page 3-7)
5. Remove the ceramic glass cooktop(See page
3-8)
6. To remove the Working coil plate.
a) Remove the 2 burner insulators, 4 MICA
sheets and 4 LED Packings. After that,
Remove 6 screws on the working coil plate.
COMPONENT ACCESS
WORKING COIL
Earth Wire
Screw 1EA
Burner
Insulator 2EA
LED Packing
4EA
MICA Sheet
4EA
b) First, Remove the Top sensor connector and
Thermal fuse connector on the upper right side
of the Case Assembly.
Top Sensor
Connector
c) Pull the each working coil plate to the opposite
direction. Be careful when Pull. If not,
Connector would be broken.
Second
First
d) Unplug the 2 LED PCB connectors.
3-9
Thermal Fuse
Connector
Second
First
- Quick Links:
- Exploded View
Hide quick links:
Table of Contents
