Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAfETy
WARNING! DO NOT use the tool if damaged or thought to be faulty.
WARNING! ensure that Health & Safety, local Authority Regulations and general workshop practice Regulations are adhered to
when using tools.
WARNING! If jacking up a vehicle refer to manufactures instructions for vehicle and jack.
DO NOT use the tool for a task it is not designed to perform.
8
DO NOT use worn, or damaged sockets.
8
DO NOT use the tool unless you have been instructed in its use by a qualified person.
8
DO NOT operate the tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Maintain the tool in good condition.
9
Follow all workshop safety rules, regulations and conditions.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the working area.
9
2. INTRODUCTION
Conical shaped design allows socket to fit over locking/wheel nut. Socket is hammered onto nut using the punch, so nut and socket wedge
together. nut can then be removed with a breaker bar or impact wrench. Set also includes drift to remove nut from socket.
3. SpECIfICATION
Model No:..............................................................................................................SX272.V2
drive: .........................................................................................19mm and 22mm Hex Drive
19mm Maximum Internal Sizes: .............................................................. Ø18, 19, 20, 21mm
22mm Maximum Internal Sizes ..................................................................... Ø23, 24, 25mm
© Jack Sealey limited
LOCKING WHEEL NUT REMOVAL SET 10pc
Model no:
Wear protective
gloves
Original Language Version
SX272.V2
SX272.V2 Issue 1 22/05/18
Related Manuals for Sealey SX272.V2
Summary of Contents for Sealey SX272.V2
- Page 1 SX272.V2 Model no: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business park, Bury St Edmunds, Suffolk. Ip32 7AR 01284 757500 01284 703534 [email protected]...