Page 3
Predator 32N Owner’s Manual SAFETY PRECAUTIONS DANGER EXPLOSION HAZARD Never operate the machine in an explosive atmosphere, near combustible materials, or where ventilation does not clear exhaust fumes. WARNING BURN HAZARD Never come into contact with the engine or muffler when engine is operating or shortly after it is turned off.
Predator 32N Owner’s Manual TABLE OF CONTENTS 1.INTRODUCTION 2.SPECIFICATIONS 3.WARRANTY INFORMATION 4.SAFETY PRECAUTIONS 5.OPERATION INSTRUCTIONS 6.MAINTENANCE 7.TROUBLESHOOTING 8.FAULTS WHICH CANNOT BE AUTOMATICALLY RESET 9.PARTS DRAWINGS & DIAGRAMS 10.DECLARATION OF CONFORMITY OIPB-I02001-PREDATOR32N_V1.0 P a g e 0 1 / 0 7 / 1 9...
Predator 32N Owner’s Manual 1.INTRODUCTION Innovatech Products and Equipment Company specializes in the manufacturing and distribution of surface preparation equipment and supplies. From our early origins as a flooring removal company, and a foundation based upon the success of our Terminator line of flooring removal machines, Innovatech has transformed itself into an industry leader over a twelve-year period.
Predator 32N Owner’s Manual 3.WARRANTY INFORMATION Innovatech warrants to original retail purchaser of the equipment: A. LIMITED WARRANTY The equipment, when first delivered, will conform to the specifications set forth in the Owner’s Manual and will be without defect in material or workmanship. For a period of one (1) year after delivery to the original retail purchaser, or 300 clock hours of operation, whichever occurs first;...
Predator 32N Owner’s Manual Innovatech will have no obligation or liability to the purchaser or to any third party with for any damage caused by the equipment or as a result or consequence of any claimed defect in the equipment, any failure to warn or notify, or any claimed non-conformity to the specifications;...
Predator 32N Owner’s Manual 5.OPERATION INSTRUCTIONS Before starting: 1. Check the floor carefully and remove all bolts, nails, as well as any loose material that could get caught in the machine. 2. Fit the appropriate tools to the machine. 3. Fit splash guard to the right height. 4.
Predator 32N Owner’s Manual 6.MAINTENANCE Clean machine after every use. To clean machine, use a low-pressure water hose or air pressure. Do not use a high PSI pressure washer. This could force water into areas of the machine unintentionally and damage parts. A regular inspection of machine for wear and damage should be done on a regular basis.
Predator 32N Owner’s Manual 8.FAULTS WHICH CANNOT BE AUTOMATICALLY RESET Faults which cannot be automatically reset are listed in the table below. To clear these faults: 1. Remove power from the drive controller. 2. Wait for the display to go off completely. 3.
Page 11
Predator 32N Owner’s Manual • Thermal trip due to prolonged • Allow the motor to cool before restarting O L F Motor Overload motor overload • Motor power rating too low for the application • Loss of phase at drive controller •...
Predator 32N Owner’s Manual 9.PARTS DRAWINGS & DIAGRAMS P32N Grinder ITEM PART NO DESCRIPTION Adjustable Clevis Pin, 5/8”*2-1/2”L 11-0082 11-0052 Cotter Pin 96-0318 Grinder Head (P32N) 96-0325 Frame-Complete build-up (P32N) 2”Hose 825-0003 OIPB-I02001-PREDATOR32N_V1.0 12 | P a g e 0 1 / 0 7 / 1 9...
Page 13
Predator 32N Owner’s Manual Frame complete build-up(96-0325) ITEM PART NO DESCRIPTION 13-0162 Linch Pin 54-0031 Wheel (10in) 11-0204 Flat washer 96-0317 Frame-32N, 32ND, 32NDX OIPB-I02001-PREDATOR32N_V1.0 13 | P a g e 0 1 / 0 7 / 1 9...
Page 14
Predator 32N Owner’s Manual Frame complete build up- P32N, P32ND, P32NDX (96-0317) ITEM PART NO DESCRIPTION 96-0293 Frame-Structure (skeleton) assy 96-0308 Inverter Box 51-0898 Inverter box attachment strip Hex head cap screw, 5/16”-18*1” 11-0132 Flat washer, 5/16” 11-0034 Split lock washer, 5/16” 11-0040 54-0017 Water Tank...
Page 15
Predator 32N Owner’s Manual Frame- Structure (skeleton) assy (96-0293) ITEM PART NO DESCRIPTION Steel Nylon-Insert Lock Nut, 7/16”-14 ZP 11-0027 Washer, 7/16” 11-0036 Hex head cap screw, 7/16”-14*3" 11-0253 Hex head cap screw, 7/16”-14*5” 11-0219 Nut, 7/16”-14 11-0254 Washer (split-lock), 7/16” 11-0320 13-0144 Retaining Ring (E-Style)- for 3/4"...
Page 16
Predator 32N Owner’s Manual Frame Handle Assembly (96-0304) ITEM PART DESCRIPTION Hex head cap screw, GR5, 3/8”-16*1”ZP 11-0007 Steel USS Flat Washer, 5/16”, ZP 11-0139 Steel hex nut, GR8: 3/8”-16, ZP 11-0124 Steel split lock washer, 3/8”, ZP 11-0129 Hex head cap screw, GR5:1/4”-20*2”L, ZP 11-0234 Button head socket cap screw, ¼”-20*5/8”...
Page 17
Predator 32N Owner’s Manual Grinder head- Complete unit (with shroud)- P32N (96-0318) ITEM PART NO DESCRIPTION Split lock washer, ¼” 11-0069 Hex head cap screw, ¼”-20 x2” 11-0234 Flat washer, ¼” 11-0259 54-0027 Splash Guard 54-0039 Shroud (cut-out panel) 96-0027 Cutter head-Floating Assy 96-0319 Shroud (main cover)
Page 18
Predator 32N Owner’s Manual Cutter Head, Floating Head Assembly (96-0027) ITEM PART NO DESCRIPTION Washer, 7/16” 11-0036 Hex head cap screw, 7/16”-14 x 1-1/4” 11-0079 Socket head cap screw, 3/8”-24 x 2” 11-0147 Washer (Belleville, serrated), 3/8” (0.413ID 11-0162 X 0.630 OD) Washer (split-lock), 7/16”...
Page 20
Predator 32N Owner’s Manual This page is left blank intentionally. OIPB-I02001-PREDATOR32N_V1.0 20 | P a g e 0 1 / 0 7 / 1 9...
Page 21
Predator 32N Owner’s Manual Grinder head- Drum [drive] unit (without shroud)- P32N (96-0321) ITEM PART NO DESCRIPTION Split lock washer, 5/16” 11-0040 Split lock washer, 3/8” 11-0129 Hex head cap screw, 5/16”-18 x 1, Gr8 11-0192 Hex head cap screw, ¾”-10 x 2” 11-0136 Hex head cap screw, 3/8”-16 x 1-1/2”...
Page 22
Predator 32N Owner’s Manual Tensioner Sliding Unit (96-0012) ITEM PART NO DESCRIPTION Steel USS Flat washer, DR2: 5/16” screw 1001 11-0034 Hex head cap screw, 3/8”-16x 2-1/2” 1002 11-0122 Hardened steel dowel pin: 3/16”dia, 5/8”L 1003 13-0133 1004 51-0560 Tensioner Top Plate 1005 11-0140 Flat head socket cap screw, 1/4"-20x3/4...
Page 23
Predator 32N Owner’s Manual Tensioner Idler Assembly (96-0098) PART ITEM NO DESCRIPTION 51-0017 1101 Tensioner Idler Shaft 51-0018 1102 Sleeve Roller Idler Pulley 13-0137 1103 Retaining Ring E-Style (7/8" Shaft Diameter) ZP 13-0133 1104 Steel dowel pin: 3/16 dia x 5/8 long 13-0122 1105 Ball Bearing, 20ID x 52OD x 15H...
Page 24
Predator 32N Owner’s Manual Bearing assy (motor base and drum connection) (96-0022) ITEM PART NO DESCRIPTION 1201 13-0123 Ball Bearing 1202 13-0125 V-ring seal, 225ID*15W 1203 51-0006 Bearing housing 1204 51-0007 Bearing shaft 1205 51-0048 Spacer ring OIPB-I02001-PREDATOR32N_V1.0 24 | P a g e 0 1 / 0 7 / 1 9...
Page 25
Predator 32N Owner’s Manual Idler (main drive) assy (96-0019) ITEM PART NO DESCRIPTION 1301 13-0121 Ball bearing 1302 13-0135 Retaining ring (E-style) 1303 51-0020 Idler pulley sleeve 1304 51-0021 Idler pulley shaft OIPB-I02001-PREDATOR32N_V1.0 25 | P a g e 0 1 / 0 7 / 1 9...
Page 27
Predator 32N Owner’s Manual Cutter head pulley assy (without top pulley) (96-0282) ITEM PART NO DESCRIPTION 1501 13-0120 Bearing (60*110*36.5) O-ring (2”ID*2-3/8”OD*3/16”W) 1502 13-0131 Dowel pin, 1/4 “dia *1”long 1503 13-0134 1504 51-0002 Bearing housing (cutter head, top) 1505 51-0191-6 Cutter head pulley 1506 51-0867...
Page 28
Predator 32N Owner’s Manual Floating Head - Triangle Holder Assembly (96-0025) ITEM PART NO DESCRIPTION Flat head Philips crew, #10-24 x5/16” 1601 11-0142 O-ring, 1/8”ID X5/16”OD X 3/32”W 1602 13-0142 1603 51-0110 Triangle holder center rotator 1604 51-0132 Cutter head triangle holder hold down 1605 51-0138 Cutter head triangle holder base...
Page 29
Predator 32N Owner’s Manual This page is left blank intentionally. OIPB-I02001-PREDATOR32N_V1.0 29 | P a g e 0 1 / 0 7 / 1 9...
Page 30
Predator 32N Owner’s Manual Drum Assembly (96-0033B) ITEM PART NO DESCRIPTION 1701 96-0021 Drum envelope 1702 96-0327 Cutter head pulley 1703 96-0282 Cutter head pulley assy 1704 96-0019 Idler main drive assy 1705 96-0012 Tensioner sliding unit 1706 53-0017 Tensioner stationary anchor 1707 51-0014 Tensioner sliding track...
Page 31
Predator 32N Owner’s Manual Drum Envelope (96-0021) ITEM PART NO DESCRIPTION 1801 53-0211 Drum top plate 1802 51-0022 Drum side wall: spacer bar 1803 51-0046 Drum bottom plate 1804 53-0222 Cover plate tensioner access hole Socket head cap screw, #10-24 x ½” 1805 11-0149 Hex head cap screw, 1/4"-20 x3/4”...
Page 32
Predator 32N Owner’s Manual This page is left blank intentionally. OIPB-I02001-PREDATOR32N_V1.0 32 | P a g e 0 1 / 0 7 / 1 9...
Page 33
Predator 32N Owner’s Manual Cutter head pulley (96-0327) ITEM PART NO DESCRIPTION 1901 11-0169 Socket Head Cap Screw, 1/4"-20 x 3/4" Button head socket cap screw, ¼”-20 x5/8” 1902 11-0349 1903 13-0120 Bearing, 60 ID x110 OD x36.5 W 1904 13-0124 Seal, V-Ring, 45ID x 5W x 9H 1905...
Page 34
Predator 32N Owner’s Manual OIPB-I02001-PREDATOR32N_V1.0 34 | P a g e 0 1 / 0 7 / 1 9...
Predator 32N Owner’s Manual 10.DECLARATION OF CONFORMITY CERTIFICAT DE CONFORMITÉ / GELIJKVORMIGHEIDS CERTIFICAAT / DECLARACIÓN DE CONFORMIDAD / DECLARAÇÃO DE CONFORMIDADE / DICHIARAZIONE DI CONFORMITA Innovatech Products 4701 Allmond Ave Louisville, Kentucky, USA 40209 Tel: (425) 405-9100 Toll Free: (800) 267-6682 Fax: (425) 405-9108 Declare under our sole responsibility that the product to which this declaration relates is in conformity with the following standard(s) or other normative documents.
Page 37
Predator 32N Owner’s Manual Noise Level Pressure level Vibration level Puissance Pression Niveau de acoustique acoustique vibration Geluidniveau Geluidsdrukniveau Vibratieniveau Nivel Sonoro Nivel Acustico Nivel de Vibracion Nivel del Ruido Pressão Acústica Nivel de Vibração Potenza Pressione Acustica Livello di Vibrazione Lwa (dB) Lpa (Db) a hv (m/s 2 )
Page 38
P32N OWNER’S MANUAL Bartell Morrison Inc. Bartell Morrison (USA) LLC 170 Traders Blvd 200 Commerce Drive, Unit A Mississauga, Ontario, Canada Freehold, New Jersey, USA L4Z 1W7 07728 Tel: 1-647-953-4100 Tel: 1-848-225-8100 Fax: 1-647-953-4101 Fax: 1-848-225-8101 Innovatech SPE International 4701 Allmond Ave Honeyholes Lane Louisville, Kentucky, USA Dunholme, Lincoln, UK...