Summary of Contents for Sunrise Medical Quickie Q700-UP M
Page 1
S ea t ing S yst e m P/N 247556 Instructions for Use Q 7 0 0 - U P M S e a t i n g m a n u a l...
Page 2
Thank you for choosing a Quickie Power Chair. We want to We at Sunrise Medical want you to get the best out of your hear your questions or comments about this manual, the wheelchair. This Owner’s Manual will familiarize you with the safety and reliability of your system, and the service you chair and its features.
Contents 1.0 User information .......... ... 4 5.0 Setting up the wheelchair ........ 1.1 This user manual .......... ... 4 5.1 Seating system ............ . 14 1.2 For further information ........ ... 4 5.2 Seat height ............ . 14 1.3 Symbols used in this manual ......
In case there is no authorized dealer in your area or you have any questions contact Sunrise Medical either in writing or by telephone. For information about product safety notices and product recalls, go to www.SunriseMedical.com...
2.0 Safety Follow the instructions carefully next to these warning symbols! Not paying careful attention t o these instructions could result in physical injury or damage to the wheelchair or the environment. Where ver possible, safety information is provided in the relevant chapter. Fig.
Use of these items may cause your wheelchair to become unstable. • The vent tray must be installed and maintained by a Sunrise Medical authorized dealer. Safety: Swing away tray DANGER! •...
2.7 Safety: General Warnings 2.7.3 Attendants DANGER! DANGER! Make sure you heed all warnings and follow all • Always ensure that you are able to operate all controls from instructions in each section of this manual. Warnings that a comfortable position. Paying attention to your posture is apply to the user also apply to you.
As a part of our ongoing product improvement initiative, Sunrise Medical reserves the right to change specifications and design without notice. Further, not all features and options offered are compatible with all configurations of the wheelchair.
Page 9
Fig. 3.1 Main Components (Fig.3.1) Headrest Arm Rest Joystick Seat Cushion Side Cushion Knee Fixation Foot Rest Front Casters Drive Wheels 10. Rear Casters 11. Motors 12. Battery Box, (under seat) 13. Stand Up Actuators 14. Backrest WARNING! DO NOT use any wheelchair that has been involved in a motor vehicle accident.
4 .0 Warnings for Components and Options 4 .5 Positioning bel ts WARNING! DANGER! • If you use parts or make changes not authorized The positioning belt is predominately used to support by Sunrise it may create a safety hazard and will your posture.
4.8 Upholstery fabric 3. Pinch points Pinch points may occur when operating the powered seating options on this system. Ensure all hands and DANGER! body parts are clear of all power seating components 1. Replace worn or torn fabric of the seat sling and/or seat that may result in pinch points before operating back as soon as you possible.
265 lbs (120 kg). Never exceed this capacity while • Do Not remove the motor or suspension springs. operating the powered actuator. • If the springs need replacing, contact Sunrise Medical Customer Service for parts and service information. 4.15 Swing away joystick arm...
4.19 Transit DANGER! Important Transit notes for the chair: If possible and feasible, the rider should transfer to the (OEM) Fig. 4.1 original Equipment Manufacturer vehicle seat and use the vehicle restraint. If the seating system is used for transport, it must be used in a forward-facing seating position during travel in a motor vehicle.
Sunrise Medical. Adjusting C O.G. influences stability in a standing position. Never adjust the center point of gravity (C.O.G.) on the Q700-UP M without consulting a Sunrise Medical authorized dealer or customer service representative . 247556 Rev. A Q700-UP M...
5. 6 S et armrests (standard Q700 -UP M) S et armrest height The following section outlines arm rest height adjustment. In the case of either fine or gross adjustment, it is a two-part process: PART I: Adjust the armrest height using the rear pivot. PART 2: Adjust arm pad angle using the front pivot.
Page 17
S et foot plate height and angle T he power center mount footrest allows angle adjustment from 9 0° to 180° level to ground and a 7.5" (190 mm) powered length e xtension. T he left and right footplate can be adjusted by an angle of + /-5.0°...
When a bigger seat depth is required ensure that the cables are lengthened before the mechanical adjustment takes place. DANGER! We strongly recommend that you contact your Sunrise Medical approved authorized dealer to adjust the seat depth, because adjusting the seat depth will affect the center of gravity.
2. Slide controller (D) to desired height. 3. Tighten screw (C). 5. 11 Check after setup and/or adjustment of wheelchair After the initial setup by the Sunrise Medical Authorized Dealer Fig. 5.1 9 or after making any adjustments to the wheelchair a check to confirm that no interferences exist must be completed.
6.0 Seating positioning accessori es 6.1 Lap strap / seating positioning belt (Fig. 6.1) DANGER! • This product is only to be used to position a single person in a wheelchair. • Lap straps are not suitable for transit purposes, approved occupant restraint systems must be used.
Page 21
Positioning a person with a lapstrap DANGER! • Always make sure that the lap strap is correctly secured and adjusted prior to use. • Too loose a strap could cause the user to slip down and cause serious injury. • Check lap strap and securing components at regular intervals for any signs of fray or damage.
7.0 Using the seating system 7.1 Making a transfer Sunrise Medical recommends that you consult your healthcare professional for assistance in developing your personal front or side transfer technique to best suit your needs and avoid any personal injury. DANGER! To prevent a fall: •...
Page 23
DANGER! Move your wheelchair as close as possible to the seat you intend to transfer into. Lower the center mount foot plate, & R-Net Control System: • Ensure the area is level and free of obstacles and hazards. • Turn the control system ON. •...
7.2 Curves DANGER! • In certain circumstances your wheelchair could become DANGER! unstable. Full speed turns should not be attempted. If you need to turn • Before attempting to climb or descend a slope or a curb, sharply you must reduce your speed with the joystick or speed caution should be taken when using weight shift options setting.
7. 5 (Powered) seating option The wheelchair can be equipped by the following mechanical and/ or powered options to adjust your seating position. These options an be operated by the user without the use of tools. Powered adjustable seating options (Fig. 7. 6 - Fig. 7.8). How to operate these powered seating options c an be found in &...
7. 6 Electric Standing function 7. 7 Seat Memory Position The Quickie Q700-U P M has an electric standing function. The control system on the Q700-U P M has up to 6 This function makes it possible for the user to stand up in the predefined seat memory positions.
Page 27
7.7.1 Retrieving a Memory Seat 7.7.2 Return to drive mode Positio Press the ”Mode” button one or more times until a standard n (Fig. 7.9 to 7.11) display image with speed indicator appears in the LCD control 1. Press the ”Mode” button, (A), one or more times until panel display.
Page 28
7.7.4 Delete custom programmed memory position Fig.7.12 Refer to Fig.7.12 to 7.15 Remove the rear cover of the backrest and connect a Switch with a 3.5mm Jack to the socket on the CxSM, (Complex Seating Module) (A-Fig. 7.16). Press the ”Mode” button one or more times until a seat icon appears in the LCD control panel display (Fig.
7.8 Stand Up function This power chair has an electric standing function. This function makes it possible for the user to stand up in the wheelchair. • The stand up procedure automatically locks the front and rear caster arm suspension. •...
Page 30
Adaptation Adjustment: Seat the user into the wheelchair. • Feed the buckle on the chest strap through the loop (Fig. 7.17). • Pull the chest strap so that it fully supports the users upper body firmly and comfortably (Fig. 7.18). •...
• Check to make sure components are not leaking, and wear, or other indicators of excessive wear. Discontinue components are free from waste/dirt. If one of these use if damage is found and contact a Sunrise Medical items are found stop using the chair immediately and Authorized dealer.
• A complete inspection, safety check and service should Please take into acc ount the manufacturer’s instructions or be made by a Sunrise Medical authorized dealer at least the disinf ectant you are using. once per year.
* Daily = Before each use of the wheelchair. Quarterly = Every three (3) months. If fasteners are found to be loose a Sunrise Medical Authorized Dealer should tighten the fastener to the torque setting per size detailed below, unless stated otherwise in all appropriate owner’s manuals or installation instructions (if applicable).
9.0 Technical specifications: Applicable norms / standards This product complies with the regulations and guidelines for medical aids and carries a CE symbol. The product meets the requirements and standards below. These are checked by independent institutions. Standard Definition / description Test Dummy Weight EU guideline...
6. WHAT AUTHORIZED DEALER MUST DO - 1. Obtain from Sunrise Medical, while this warranty is in effect, prior approval for return or repair of covered parts. Contact Customer Service for a Returned Material Authorization (RMA) number and information as to where to return the product.