Sony SPP-Q110 Operating Instructions Manual
Hide thumbs
Also See for SPP-Q110:
- Operating instructions manual (9 pages) ,
- Operating instructions manual (6 pages)
Available languages
Available languages
Quick Links
Cordless Telephone
Operating Instructions
Mode d'emploi (verso)
SPP-Q110/Q120
Sony Corporation © 1996 Printed in Taiwan, R.O.C.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
INDUSTRY CANADA NOTICE
NOTICE:
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements. The Industry Canada
does not guarantee the equipment will operate to the user's satisfacion.
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. The
customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made
by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas.
Caution: Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
The Load Number (LN) assigned to each terminal denotes the percentage of the
total load to be connected to a telephone loop which is used by the device, to
prevent overloading. The termination on a loop may consist of any combination
of devices subject only to the requirement that the sum of the Load Numbers of
all the devices does not exceed 100.
IMPORTANT INSTRUCTIONS TO USERS
• Your model SPP-Q110 or SPP-Q120 has been approved by the Industry
Canada.
• The load number of your model is
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
CAUTION
The cordless telephone operates at a frequency that may cause interference to
nearby TVs and VCRs; the base unit should not be placed near or on the top of a
TV or VCR; and, if interference is experienced, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.
INFORMATION
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
NOTICE
This cordless telephone uses radio communications between the handset and the
base unit, and may not ensure privacy of communication. Other devices
including other cordless telephones may interfere with the operation of this
cordless telephone or cause noise during operation. Cordless telephones must
not cause interference to any licensed radio service.
3-856-344-21(1)
Your model (SPP-Q110/Q120) has been assigned a unique security code, out of
possible 4,096 codes, during its manufacture.
Precautions
• Do not install the phone in a location near a heat source such as radiators or
airducts, or in a place subject to direct sunlight, excessive dust, moisture, rain,
mechanical vibration, or shock.
• Should any liquid or solid object fall into the phone, unplug the phone and
have it checked by qualified personnel before operating the phone any
further.
• This telephone is designed and approved for single lines only. It should not
be connected to multiple lines or a coin telephone.
If you have any question or problem concerning your telephone that is
not covered this manual, please consult the nearest Sony Service Station
authorized to service telephone terminal equipment.
RECYCLING NICKEL-CADMIUM BATTERIES
For the Factory Service Center nearest you call 416-499-SONY (Canada only)
Caution: Do not handle damaged or leaking nickel-cadmium batteries.
Setting up the phone
Connect the base unit
If you want to hang the base unit on the wall, mount the unit first
(see "Mounting your phone on the wall").
1
To telephone
outlet
2
To AC outlet
1
Connect the telephone line cord to the TEL LINE jack and to a
telephone outlet.
2
Connect the AC power adaptor to the DC IN 9V jack and to an AC
outlet.
3
Fully extend the antenna. Make sure it points toward the ceiling.
Notes
• Use only the supplied AC-T56 AC power
adaptor. Do not use any other AC power
adaptor.
• Connect the AC power adaptor to a continuous
power supply.
• Place the base unit close to the AC outlet so that
you can unplug the AC power adaptor easily.
Tip
If your telephone outlet is not modular, contact your telephone service
company for assistance.
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing
mode (tone or pulse).
DIAL MODE switch
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as is; otherwise, set to P.
NICKEL-CADMIUM BATTERY.
MUST BE DISPOSED OF PROPERLY.
Nickel-Cadmium batteries are recyclable. You can help preserve our
environment by returning your unwanted batteries to your nearest Factory
Service Center for collection, recycling or proper disposal.
Note: In some areas the disposal of nickel-cadmium batteries in
household or business trash may be prohibited.
Telephone line cord
(supplied)
3
To TEL
LINE
jack
AC power adaptor (supplied)
To DC IN 9V
Depending on your dialing system, set
the DIAL MODE switch as follows:
If your dialing system is
Tone
Pulse
Hook
Polarity of the plug
Modular
Set the switch to
T
P
Related Manuals for Sony SPP-Q110
Summary of Contents for Sony SPP-Q110
- Page 1 3-856-344-21(1) Your model (SPP-Q110/Q120) has been assigned a unique security code, out of possible 4,096 codes, during its manufacture. Precautions • Do not install the phone in a location near a heat source such as radiators or Cordless Telephone airducts, or in a place subject to direct sunlight, excessive dust, moisture, rain, mechanical vibration, or shock.
-
Page 2: Making And Receiving Calls
If the battery lasts only a few minutes even after 12 hours of charging, the usable life of the battery has expired and needs replacement. Contact your local Sony authorized dealer or service center, and ask for Sony BP-T16 rechargeable battery Speed dialing pack. -
Page 3: Troubleshooting
Antenna: 430 mm (17 inches) Mass Approx. 345 g (Approx. 12.1 oz) If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. Design and specifications are subject to change without notice. -
Page 4: Installation Du Téléphone
à préserver l’environnement en rapportant les batteries usées dans un Afin d’éviter tout risque de choc électrique, ne pas ouvrir le coffret. Confier centre de Service Sony ou dans un point de ramassage, recyclage ou toute opération d’entretien à un personnel qualifié uniquement. -
Page 5: Composition Abrégée
Le numéro est effacé de la mémoire et vous entendez un long bip de confirmation. batterie a expiré et qu’elle doit être remplacée. Consultez votre revendeur ou un centre de service après-vente Sony pour vous procurer une batterie rechargeable BP-T16 Sony. -
Page 6: Dépannage
Approx. 12 heures Si vous avez des questions ou si vous rencontrez des difficultés concernant votre Dimensions Approx. 148 x 58 x 233 mm (l x h x p), antenne non comprise téléphone, consultez votre revendeur Sony. (approx. 5 ⁄ ⁄ ⁄...