Table of Contents
Quick Links
Table of Contents
Related Manuals for AERMEC INVERTER WLRC
Summary of Contents for AERMEC INVERTER WLRC
- Page 1 USER MANUAL WLRC 5389551_01 - 1601...
-
Page 2: Table Of Contents
Illegal dumping of the product by the user entails the application of administrative sanctions provided by law All specifications are subject to change without prior notice. Although every effort has been made to ensure accuracy, Aermec shall not be held liable for any errors or omissions. -
Page 3: User Interface
USER INTERFACE Keys available 1.1. REMOTE CONTROL on remote control • Some of the buttons of the re- mote control are not used for the required air conditioner and are therefore not described in these in- structions. Pressing of these keys will not affect the operation of the air conditioner. - Page 4 remote control display icons available Alarm Functions represented by the icons: Indicates the AUTOMATIC mode is active Indicates the COOLING mode is active Indicates the DEHUMIDIFICATION mode is active Indicates the VENTILATION mode is active Indicates the HEATING mode is active Indicates the actual fan speed Indicates the setting has been transmitted to the receiver located on the indoor unit...
-
Page 5: Functions Available Through The Remote Control
FUNCTIONS AVAILABLE THROUGH THE REMOTE CONTROL 2.1. SWITCHING THE UNIT ON OR OFF By pressing the button it is possible to switch the ON/OFF Switching on unit on or off. When off some information is still displayed on the remote control: the operating setpoint of the last operat- MODE ing mode used, and switch on timers programmed (ON) and any icons tied to the function active during the last switch... -
Page 6: Setting The Operating Setpoint
2.3. SETTING THE OPERATING SETPOINT ON/OFF All the operating modes (except the automatic one) require an room air temperature value to control to: this is called the operating setpoint. Operating setpoint MODE If the unit is on (and the automatic mode is not selected), ON/OFF pressing the buttons allows decreasing or... -
Page 7: Setting The Motorised Discharge Fin (Swing)
ON/OFF MODE 2.5. SETTING THE MOTORISED DISCHARGE FIN (SWING) If the unit is on, pressing the button allows the activation of the swing function of the motorised discharge fin. This fin T-ON/T-OFF I FEEL Motorised discharge varies the direction of the flow of air into the ambient, on the TEMP CLOCK fin setting... -
Page 8: Setting Or Cancelling
ON/OFF 2.7. SETTING OR CANCELLING A PROGRAMMED SWITCH ON (TIMER ON) MODE The units possess a timer used to program switching on by ON/OFF specifying the time that you want the unit to start. By pressing ON/OFF ,on the left side, (Attention: This button has two dif- T-ON/T-OFF I FEEL ferent functions that are activated by pressing on the left and... -
Page 9: Activating / Deactivating The Extended Ventilation
ON/OFF 2.9. ACTIVATING / DEACTIVATING THE EXTENDED VENTILATION During the operation in cooling or dehumidification mode the MODE condensate caused by the humidity in the air is formed on the heat exchanger within the unit. This function allows the Setting the extended ventilation to be extended for two minutes after the unit is ventilation switched off, thereby drying the heat exchanger. -
Page 10: Activating / Deactivating The Turbo Function
2.11. ACTIVATING / DEACTIVATING THE TURBO FUNCTION The unit allows the setting of three fan speeds during the vari- ous operating modes (except the automatic mode and the dehumidification mode). There is an additional speed called ON/OFF turbo. Setting the MODE TURBO function If the unit is on, pressing the... -
Page 11: Activating / Deactivating The Indoor Unit's Display
ON/OFF MODE 2.13. ACTIVATING / DEACTIVATING THE INDOOR UNIT’S DISPLAY The display on the indoor unit must be activated using the T-ON/T-OFF I FEEL remote control; To activate the display on the front panel of TEMP CLOCK the indoor unit press the button on the remote control. -
Page 12: Activate / Deactivate The Antifreeze
ON/OFF ON/OFF 2.15. ACTIVATE / DEACTIVATE THE ANTIFREEZE The frost protection function is activated only during the he- MODE MODE ating mode; this feature allows to maintain a set of hot work equal to 8 ° C, so as to ensure that the ambient temperature does not fall below this threshold. -
Page 13: Setting Or Removing The Button Lock
ON/OFF 2.17. SETTING OR REMOVING THE BUTTON LOCK MODE ON/OFF To lock or remove the lock of the buttons on the remote con- trol, press the buttons simultaneously. The icon on the remote control’s display shows that the key- Setting the button lock MODE pad of the remote control is locked. -
Page 14: Setting Indoor Unit Master
2.19. SET A MASTER UNIT To set an indoor unit as MASTER is necessary to follow the fol- lowing steps: ON/OFF ON/OFF ON/OFF (1) Select the mode FAN ONLY ( (2) Set up a working set of 30°C; (3) Press the following keys in sequence (within 5 seconds): MODE MODE MODE... - Page 16 Aermec no asume responsabilidad alguna por été faits pour assurer l’exactitude, Aermec ne kennisgeving worden gewijzigd. Hoewel alle errores u omisiones eventuales. AERMEC S.p.A. Via Roma, 996 - 37040 Bevilacqua (VR) Italy T. (+39) 0442 633111 F. (+39) 0442 93577 [email protected] www.aermec.com...