2 Specifications When the blender is used When the dry mill& wet mill are used Power supply 220-240V ~ 50-60Hz Power consumption 185-205W Rated duration Continuous (Repetition 3 min. ON, 1 min. OFF) 90 seconds at a time Container capacity Maximum 1,000mL Dry:Maximum 50g / Wet:Maximum 200mL Container material...
6 Disassembly and Assembly Instructions 6.1. Juice Cup and Cutter Assy 1. Remove the cover, then turn the juice cup up-side-down. 2. Secure the juice cup and turn the cup base assy counter clockwise. Then the packing can be removed. 3.
Page 13
4. Turn the connector upper clockwise with long nose pliers. Then the cutter assy and connector upper can be removed. 6.2. Mill Cup and Cutter Assy 1. Secure the mill cup and turn the cup base assy counter clockwise. Then the mill packing can be removed. 2.
Page 14
3. Turn the connector upper clockwise with long nose pliers. Then the cutter assy and connector upper can be removed. 6.3. Bottom Plate 1. The bottom plate can be removed when its four screws are ossened.
Page 15
6.4. Connector (Lower) 1. Hold the part under the motor shaft by means of a screws-driver, then turn the connector (lower) clockwise. The connector (lower) can be removed. • The connector (lower) can be relatively easily removed by means of hitting its projecting section clockwise with use of a screwdriver grip in a forceful manner.
Page 16
6.6. Motor Assy 1. Pull out while the faston terminal with the part of the lead wire. 2. Takes out a motor from the body and it removes. The brush can be exchanged by metal fittings coming when bending fixation metal fittings. 6.7.
8 Exploded View and Replacement Parts List 8.1. Parts Location...
Page 20
Replacement Parts List Notes:Important safety notice • Components identified by mark have special characteristics important for safety. • " When replacing any of these components use only manufacturer's specified parts." MODEL No. MX-GX1061WTN/WTZ Pcs/Set Safety Ref. No. Part No. Part Name & Description Remarks ...