HP ESG E4400B Installation Note page 15

Appendix

Copying Files to a Directory Using DOS

The PC MS-DOS® command line example below shows how to create a new file directory on the PC

hard drive, and move the necessary files from the firmware upgrade disk into the new directory.

1. C:\> md dl (Make the directory called dl.)

2. C:\> cd dl (Change to the directory called dl.)

3. C:\DL> copy a: split_dl.exe (Copy split_dl.exe to the directory called dl.)

4. C:\DL> copy a: dlserial.bat (Copy dlserial.bat to the directory called dl.)

5. C:\DL> copy a: wait.exe (Copy wait.exe to the directory called dl.)

6. C:\DL> copy a: falcon.out (Copy falcon.out to the directory called dl.)

Unzipping a File Using MS Windows

The pkunzip.exe file is included on the PC disk with the zipped file.

1. To review the files, go to the Windows File Manager and choose the appropriate directory (A: or B:).

2. To unzip a file, click

3. Type the following information in the command line box, and then press enter:

A:\pkunzip .zip c:\update

(run pkunzip) (zip filename) (directory where you want the unzipped file to go)

Using a Browser Such as Netscape Navigator to Download or

Copy a File from a Web Page

1. Click on

, located at the top left corner of Netscape.

File

2. Choose

.

Save As

3. Choose an empty directory.

4. Make sure that the file name to download or copy is within the File Name Window.

5. Click the

button to copy the file. (A Saving Location window will appear indicating the copy file

OK

progress.)

6. Once the download or copy of the file is complete, exit Netscape.

Using MS Windows to Unpack a .exe File

1. Using the Windows File Manager, locate the downloaded file (in directory A: or B:).

2. Highlight the file, then click

3. In the command line box, type the following, then press

Installation Note E4400-90235

, then click

.

File

Run

.

Run

: A:\.exe c:\update.

Enter

15