Table of Contents
GE
D
KTI106052, R
IRECTION
Section 6-10
Daylight Saving Time (DST) - New Dates
The automatic Daylight Saving Time feature in Microsoft Windows products may no longer run on the
Issue:
correct date, causing the system's time to be incorrect.
Some countries have changed their start and end dates for Daylight Saving Time (DST).
Cause:
Access Microsoft website
site is affected.
If the Voluson i / Voluson e relies on the automatic DST feature in Microsoft Windows, turn off the
Solution:
feature and then set the correct system time manually at the start of DST and again at the conclusion
of DST.
The Daylight Saving Time Patch is supplied as standard at BT'07 Software version 7.0.0 (or higher).
BT Version:
BT-Version:
Procedure:
1.) Press the UTILITIES key on the keyboard. The menu area changes to the Utilities menu.
2.) Select the SYSTEM item to activate the setup desktop screen.
3.) Select the
4.) Click the DATE/TIME button.
5.) In the displayed "Date/Time Properties" window select the
6.) Uncheck "Automatically adjust clock for daylight saving changes" check box and then click APPLY
(see: left image of
7.) Select the
8.) Set the proper time for the system's location and then click OK (right image of
9.) Click the SAVE&EXIT button to save your changes and exit the System Setup page.
The System is shutting down automatically and restarts again.
6-12
10
EVISION
http://support.microsoft.com/kb/928388
page in the System Setup.
GENERAL
Figure 6-15
Figure 6-15 Uncheck check box / adjust time
tab in the "Date/Time Properties" window.
DATE / TIME
Section 6-10 - Daylight Saving Time (DST) - New Dates
below).
V
OLUSON
S
to determine if the system's location
tab.
TIME ZONE
Figure
i / V
e
OLUSON
M
ERVICE
ANUAL
6-15, above).
Table of Contents
Troubleshooting
