Table of Contents
Quick Links
Copyright
Fujitsu has made every effort to ensure the
accuracy and completeness of this document.
However, as ongoing development efforts are
continually improving the capabilities of our
products, we cannot guarantee the accuracy
of the contents of this document. We disclaim
liability for errors, omissions or future changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, Windows NT,
Windows XP and Windows Vista are registered
trademarks of the Microsoft Corporation of the
United States in the United States and other
countries.
Phoenix is a registered trademark of Phoenix
Technologies Corporation of the United States.
Copyright© 1981-1999 Microsoft Corporation,
All rights reserved.
0_AmiloMini_M1010_Intr_EN.indd 1
Copyright© 2008 Phoenix Technologies, Ltd., All
rights reserved.
Other product names are trademarks or registered
trademarks of their respective companies.
© Copyright 2008 Fujitsu. All rights reserved.
No part of this publication may be copied,
reproduced or translated, without the prior written
consent of Fujitsu. No part of this publication may
be stored or transmitted in any electronic form
without the written consent of Fujitsu.
This device complies with Part 15 of the FCC
rules. Operations are subject to the following
two conditions:
(1) This device may not be allowed to cause
harmful interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Website: hk.fujitsu.com/pc
DECLARATION OF CONFORMITY
according to FCC Part 15
Copyright
9/8/08 1:18:21 PM
i
Table of Contents
Related Manuals for Fujitsu M1010
Summary of Contents for Fujitsu M1010
- Page 1 No part of this publication may be copied, liability for errors, omissions or future changes. reproduced or translated, without the prior written consent of Fujitsu. No part of this publication may LifeBook is a trademark of Fujitsu Limited. be stored or transmitted in any electronic form without the written consent of Fujitsu.
- Page 2 IMPORTANT SAFETY 9. If an extension cord is used with this product, make sure that the total ampere rating of the INSTRUCTIONS equipment plugged into the extension cord 1. Read these instructions carefully. Save these does not exceed the extension cord ampere instructions for future reference.
- Page 3 Copyright 13. CAUTION: When replacing the battery, be sure to install it with the polarities in the correct position. There is a danger of explosion if the battery is replaced with an incorrect type or is mistreated. Do not recharge, disassemble or dispose of in fire.
- Page 4 For Authorized Repair Technicians Only The Load Number assigned to each telephone terminal device denotes the percentage of the total load to be connected to a telephone loop or circuit which is used by the device to prevent overloading. The termination on a loop may For continued protection against risk of consist of any combination of devices such that fire, replace only with the same type and...
- Page 5 If you send this product to Fujitsu, or any of its industrial use. affiliates, suppliers, service providers or resellers for repair, Fujitsu does not guarantee the data This product is not designed for or intended for integrity.
- Page 6 Safety notes • During installation and before operating the device, observe the instructions on environmental conditions in the manuals of Please read these safety the device. instructions before using the • Do not drop the device and protect it from device for the first time severe shocks.
- Page 7 Use only mains adapters and the device is close to the socket. • rechargeable batteries approved by Fujitsu We recommend that you place your device for your device. on an insensitive, non-slip surface. In view •...
- Page 8 • • In the event of a thunderstorm, all data If the device is installed in a cabinet or a transfer cables (modem/LAN/PC card drawer, sufficient ventilation must be provided. modem, CF-LAN card, CF-WLAN card) Otherwise damage from overheating may should be removed at the wall from the result.
- Page 9 Only use headphones recommended by • The components (e.g. power supply) marked Fujitsu. Otherwise there is a risk of hearing with a warning sign (e.g. lightning sign) may damage due to excessive volume. only be opened, removed or exchanged by authorised, qualified personnel.
- Page 10 Additional safety notes for connector cables and devices which have devices with radio components not been specified by Fujitsu. The user is solely responsible for repairing faults arising from such unauthorised changes made to a The following additional safety notes apply device and for replacing and / or exchanging for devices with radio components (e.g.
-
Page 11: Table Of Contents
T a b l e o f C o n t e n t s Table of Contents GETTING TO KNOW YOUR Hard disk..........18 NOTEBOOK ........1 Loudspeakers and microphones ..18 Switching the loudspeaker off and on ..18 Names of the parts and their Adjusting the volume ...... - Page 12 T a b l e o f C o n t e n t s 2_AmiloMini_M1010_TOC_EN.indd 12 9/8/08 1:34:03 PM...
-
Page 13: Getting To Know Your Notebook
Front features of the notebook 9. Multi-format card reader 10. Touchpad buttons This chapter presents the individual hardware components of your M1010. It gives an overview 11. Status indicators of the displays and connections fo the device. Please familiarise yourself with these components 12. -
Page 14: Right/Bottom Features Of The Notebook
Right / bottom features of the Bottom Panel notebook 19. Battery Right Panel 15. ExpressCard slot 16. USB port 17. LAN port 18. DC input connector (DC IN) 3_AmiloMini_M1010_P1-3_EN.indd 2 9/8/08 1:19:12 PM... -
Page 15: Access Via Umts
Getting To Know Your Notebook Access via UMTS Your M1010 can connect with the internet via UMTS. To do this, use one of the following types of connection: USB dongle • a USB stick with your mobile phone provider’s SIM card a mobile end-device (e.g. -
Page 16: Working With The Notebook
Working with the notebook Notebook: switching off This chapter describes the basics for operating your notebook. Please refer to the notes in “Important Safety Instructions”, Page ii. • Shut down the operating system properly (in Switching on the notebook Windows via the Start menu by clicking Start Symbol –... -
Page 17: Status Indicators
Getting To Know Your Notebook Status indicators Battery indicator The status indicators provide information about The state of change of the battery the status of the power supply, the drives is shown by the battery indicator. and the keyboard functions. Three indicators •... -
Page 18: On-Screen Display (Osd)
On-Screen display (OSD) Backspace key The Backspace key deletes the character to the left of the Your M1010 is equipped with an on-screen dis- cursor. play (OSD). Various keyboard inputs, e.g. changes to the Tab key volume or screen brightness or activation of the... - Page 19 Getting To Know Your Notebook Fn button key enables the special functions indicated on overlay keys (see “Key combinations”, Page 8). Cursor keys The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Start key The Start key opens the Windows Start menu.
-
Page 20: Virtual Numeric Keypad
Illustration Virtual numeric keypad Other key combinations are described in the relevant manuals supplied with your application To provide the convenience of a numeric programs. keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of Key combinations are entered as follows: •... -
Page 21: Key Combinations
Getting To Know Your Notebook Increases volume Enabling/restoring from suspend mode This key combination increases the volume of the Use this key combination to integrated loudspeakers. switch suspend mode on/off. Touchpad touchpad Switch between open buttons, switching on/off applications This key combination switches Use this key combination the touchpad and the touchpad to switch between several... -
Page 22: Touchpad And Touchpad Buttons
Touchpad Touchpad buttons Touchpad and touchpad Using touchpad buttons buttons Moving the pointer • Move your finger on the touchpad. • The pointer will move accordingly. Selecting an item • Move the pointer to the item you wish to Keep the touchpad clean. Protect it from select. -
Page 23: Lcd Screen
Information on LCD screen (16:9 monitor) • 1600 x 1024 High-quality TFT displays are installed in (16:10 monitor) notebooks from Fujitsu. For technical reasons, TFT monitors are manufactured for a specific UXGA 1600 x 1200 resolution. An optimal, clear picture can only... -
Page 24: Screen Settings
Webcam Screen settings Setting the resolution your notebook is equipped with a WebCam. Depending on the software used, you can take The screen resolution of the LCD monitor of pictures, record video clips or take part in web your notebook is optimally set at the factory. chats. -
Page 25: Battery
To do this, leave your notebook turned on when it is operated with the battery. Once the battery is running low you will hear a Only use batteries approved by Fujitsu for warning alarm. If you do not connect the mains your notebook. -
Page 26: Removing And Installing The Battery
Battery removing Battery lock positions: • Push the battery lock (1) in the direction of the arrow. • The battery is released. Slide the battery lock in the direction of the arrow (2) and hold it in place. • Remove the battery from the battery compartment (3). -
Page 27: Using The Power-Management Features
Getting To Know Your Notebook Using the power- management features If you need further information about an option, you can get help with most settings The notebook uses less power when the by pressing to open the Miscrosoft available power-management features are Help. -
Page 28: Expresscards
ExpressCards An ExpressCard slot permits operation of an ExpressCard/34. Consult the documentation supplied by the ExpressCard’s manufacturer and follow the instructions provided. Never use force when installing or removing • Press the placeholder for the ExpressCard an ExpressCard. (1) so that it jumps out of the slot slightly. Make sure that no foreign objects enter the •... -
Page 29: Removing The Expresscard
Getting To Know Your Notebook Memory cards Removing the ExpressCard Your notebook is equipped with an integrated memory card reader. It supports the following formats: Always remove the card according to the rules described below, to ensure that none Without adapter: •... -
Page 30: Removing The Memory Card
Hard Disk Removing the memory card The hard disk is the most important storage medium of your notebook. You can work considerably faster and more efficiently if you In order to protect your data, always follow copy applications and files from external data the correct procedure for removing the carriers, such as CDs/DVDs or USB storage card outlined below. -
Page 31: Wireless Lan/Bluetooth Radio Components
UMTS network in permits (CE!) issued for this device. the documentation for the hardware used. Your M1010 can connect with the Internet via UMTS. To do this, use one of the following Wireless LAN and Bluetooth -... -
Page 32: Ethernet And Lan
Ethernet and LAN The internal network module of your notebook supports Ethernet-LAN (10/100/1000 Mbps). This allows you to establish a connection to a local network (LAN = Local Area Network). • Connect the network cable to the LAN port of the notebook (1). •... -
Page 33: Security Functions
Sec urit y Funct ions Security functions Configuring password protection in BIOS Setup Utility Your notebook has several security features that you can use to secure your system from unauthorised access. Before using the various options for pass- This chapter explains how to use each word protection in the BIOS Setup utility function, and what the benefits are. -
Page 34: Protecting Bios Setup Utility (Supervisor And User Password)
Protecting BIOS Setup Utility (supervisor In the Exit menu, select the option Save • and user password) Changes & Exit. Select Yes and press the Enter key. • The notebook will be rebooted and the new • password will come into effect. It will now If you have opened these operating be necessary to first enter your supervisor instructions on the screen, we recom-... -
Page 35: Password Protection For Booting Of The Operating System
Sec urit y Funct ions Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 22) , you can also prevent booting of the operating system. -
Page 36: Connecting External Devices
Connecting external devices Connecting an external monitor You can connect an external monitor to the analogue VGA monitor connection of the Always refer to the safety information notebook. Screen output is limited to a maximum provided in "Important Safety of two screens at any one time. Instructions", Page ii before connecting or disconnecting any devices to or from your notebook. -
Page 37: Setting The Refresh Rate For Your External Monitor
C onnecti ng Ex ternal Dev ic es Setting the refresh rate for your external Connecting USB devices monitor On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a scanner or a modem). If the refresh rate set is too high, the monitor may be damaged. -
Page 38: How To Remove Usb Devices Correctly
Headphone port How to remove USB devices correctly You can use the headphone port to connect headphones, external loudspeakers or an audio device with a digital optical input to your notebook. Always correctly remove device according to the rules described below, to ensure that none of your data is lost. -
Page 39: Troubleshooting And Tips
T r o u b l e s h o o t i n g a n d t i p s Troubleshooting and tips Problem Possible Cause Possible Solution With the BIOS-Setup-Utility, you can set the The notebook’s Time and date are date or time is incorrect. - Page 40 Problem Possible Cause Possible Solution The external The wrong external Terminate the application program in monitor is blank monitor has been selected Windows by pressing . If the fault or the image is or the wrong screen persists after closing the program, switch unstable resolution has been set for over to the notebook’s internal LCD screen...
- Page 41 T r o u b l e s h o o t i n g a n d t i p s Problem Possible Cause Possible Solution The notebook Notebook is in energy Leave energy saving mode. stops working saving mode. An application programme Close the application program or restart the has caused the...