Table of Contents
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDesk 800 G6 Small Form Factor PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking
code on the plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more
than one is provided with the product (such as a
detachable notebook keyboard battery, RTC coin
cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
All types including standard alkaline, coin or button
style batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[X] snaps
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Lite-On 260W EPA92 PSU
HPI instructions for this template are available at
HP's Sustainability
] screws
] adhesive
] other. Explain
Power Cord
EL-MF877-01
Contact.
Quantity
of items
included
in product
2
1
1
1
Page 1
Table of Contents
Related Manuals for HP EliteDesk 800 G6
Summary of Contents for HP EliteDesk 800 G6
- Page 1 Marketing Name / Model [List multiple models if applicable.] HP EliteDesk 800 G6 Small Form Factor PC Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Quantity of items Item Description Notes included in product already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers...
- Page 3 26. Remove the PSU from chassis 27. Remove the screws covered 28. Remove PSU cover 29. Use PH1 screw driver to remove FG screw 30. Disconnect fan connector and inlet connector 31. Loose screws and remove PCB from case 32. Loose screws and remove PSU fan 33.
- Page 4 Step5 Remove Front Bezel from chassis Step6 Disconnect HDD power cable and HDD SATA cable from HDD. Step7 Remove the driver cage from Chassis Step8 Use T-15 screw driver to loose the screws of HDD and remove HDD from HDD cage EL-MF877-00 Page 4 Template Revision C...
- Page 5 Step9 Disconnect all cables from MB Step10 Remove the Fan Duct from cooler Step11 Disconnect Cooler Fan cable from MB Step12 Use T-15 screw driver to loose the cooler screws and remove cooler from MB EL-MF877-00 Page 5 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
- Page 6 Step13 Use T-15 screwdriver to loose the screws and Step14 Separate the fan from CPU heat sink remove the fan Step15 Remove memory from the MB Step16 Rotate the handle and open it up EL-MF877-00 Page 6 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
- Page 7 Step17 Remove the CPU from the board Step18 Remove SSD M.2 Card Step19 Remove WLAN M.2 Card Step20 Remove the battery from the system board Step21 Use T-15 screwdriver to loose the screws of MB Step22 Remove MB from chassis from board EL-MF877-00 Page 7...
- Page 8 Step23 Remove speaker from Chassis Step24 Use T-15 screwdriver to loose the screws of PSU Step25 Press the PSU’s latch on chassis Step26 Remove the PSU from chassis Step27 Remove screws covered Step28 Remove PSU cover EL-MF877-00 Page 8 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
- Page 9 Step29 Use PH1 screw driver to remove FG screw Step30 Disconnect fan connector and inlet connector Step31 Loose screws and remove PCB from case Step32 Loose screws and remove PSU fan Step33 Heat the solder of the Ele-Cap of greater than 2.5cm in diameter or height and Remove it from PCBA EL-MF877-00 Page 9...