Eaton CROUSE-HINDS Series Instruction Sheet
Led lighting t2+t3 spd
Hide thumbs
Also See for CROUSE-HINDS Series:
- Instruction manual (114 pages) ,
- Operating instructions manual (44 pages) ,
- Technical manual (32 pages)
Quick Links
Instruction sheet
MTL surge protection
MTL LS15K-KP30 Range
Operating Instructions for
LED Lighting T2+T3 SPD
Installation
1) Turn off all power supplying this equipment.
2) Mount the SPD using the enclosure flanges to a flat surface.
3) Connect the wire leads as per the wiring diagrams below.
4) For optimal device performance, use shortest length of wire possible and avoid
sharp or unnecessary bends.
1
Do not attempt to open or tamper with the SPD in any way as this will
compromise performance and will void the warranty.
Megger and hi-pot tests will damage this device. Disconnect all power
supplying the equipment and isolate the SPD unit before testing.
Prior to installation, confirm the SPD is rated for the correct voltage,
and frequency equivalent to the application.
Eaton Electric Limited,
Great Marlings, Butterfield, Luton
Beds, LU2 8DL, UK.
Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283
E-mail: [email protected]
www.mtl-inst.com
© 2020 Eaton
All Rights Reserved
Publication No. INS 801-768 Rev B 121020
October 2020
October 2020
INS 801-768 Rev B
CAUTION
Related Manuals for Eaton CROUSE-HINDS Series
Summary of Contents for Eaton CROUSE-HINDS Series
- Page 1 3) Connect the wire leads as per the wiring diagrams below. 4) For optimal device performance, use shortest length of wire possible and avoid sharp or unnecessary bends. Eaton Electric Limited, Great Marlings, Butterfield, Luton Beds, LU2 8DL, UK. Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283 E-mail: [email protected]...
- Page 2 Dimensions (Units in mm) The given data is only intended as a product EUROPE (EMEA): Eaton Electric Limited, description and should not be regarded as a legal +44 (0)1582 723633 Great Marlings, Butterfield, Luton warranty of properties or guarantee. In the interest [email protected]...