Related Manuals for Electrolux Frytop EFT7 Series
Summary of Contents for Electrolux Frytop EFT7 Series
- Page 1 Frytop EFT7* Installation and operating manual * 59589G300- 2019.05 *Original instructions...
- Page 2 Foreword The installation, use and maintenance manual (hereinafter Manual) provides the user with information necessary for correct and safe use of the machine (or “appliance“). The following must not be considered a long and exacting list of warnings, but rather a set of instructions suitable for improving machine performance in every respect and, above all, preventing injury to persons and animals and damage to property due to im- proper operating procedures.
-
Page 3: Table Of Contents
Contents A SAFETY INFORMATION ......................... 5 General information ........................5 Personal protection equipment ......................6 General safety ..........................6 General safety rules ........................7 Safety signs to be placed near the machine area ................. 8 Transport, handling and storage ...................... 9 Installation and assembly ....................... - Page 4 G MACHINE CLEANING AND MAINTENANCE..................... 20 Ordinary maintenance ......................... 20 G.1.1 informations for maintenance....................20 G.1.2 Cleaning the appliance and accessories ................20 G.1.3 External parts........................20 G.1.4 Other surfaces........................20 G.1.5 Periods of non-use ......................21 Brief Troubleshooting guide ......................21 Repair and extraordinary maintenance ....................
-
Page 5: Asafety Information
SAFETY INFORMATION General information To ensure safe use of the machine and a proper understanding of the manual it is necessary to be familiar with the terms and typographical conventions used in the documentation. The following symbols are used in the manual to indicate and identify the various types of hazards: WARNING Danger for the health and safety of operators. -
Page 6: Personal Protection Equipment
Personal protection equipment Summary table of the Personal Protection Equipment (PPE) to be used during the various stages of the machine's service life. Protective Stage Safety Gloves Glasses Safety garments footwear helmet — ● ○ — ○ Transport ● ○ —... -
Page 7: General Safety Rules
• Place emergency telephone numbers in a visible position. • The A-weighted emission sound pressure level does not exceed 70 dB(A). • Turn the appliance off in case of fault or poor operation. • Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the appliance or the floor under it. -
Page 8: Safety Signs To Be Placed Near The Machine Area
indicating the personal protection equipment to be used by them. In order to reduce the risks, provide for sufficient spaces while installing the unit. To preserve these conditions, the areas around the machine must always be: – kept free of obstacles (e.g. ladders, tools, containers, boxes, etc.); –... -
Page 9: Transport, Handling And Storage
Prohibition Meaning Keep the area around the appliance clear and free from combustible materials. Do not keep flammable materials in the vicinity of the appliance Install the appliance in a well-ventilated place to avoid the creation of dangerous mixtures of unburnt gases in the same room Danger Meaning... -
Page 10: Electrical Connection
Electrical connection Before connecting, make sure the mains voltage and frequency match those indicated on the appliance data plate. • Work on the electrical systems must only be carried out by specialised personnel. • Connection to the power supply must be carried out in compliance with the regulations and provisions in force in the country of use;... -
Page 11: A.11 Reasonably Foreseeable Improper Use
– for appliances with stainless steel cabinet, remove the protective film very slowly without tearing it, to avoid leaving glue stuck to the surface; – should this happen, remove the traces of glue with a non-corrosive solvent, rinsing it off and drying thoroughly; –... -
Page 12: A.13 Machine Disposal
Precaution in case of long periods • Machine maintenance, checking and overhaul operations must only be carried out by specialised personnel or the Customer Care Service, provided with adequate personal protection equipment (safety shoes and gloves), tools and ancillary means. •... -
Page 13: Appliance And Manufacturer's Identification Data
0051 notified body EN 203–1 EU standard logo IMQ/GS gas category gas pressure Pmbar Electrolux Professional SpA Viale Treviso 15 33170 Porde- manufacturer none Italy Gas appliance Technical data ISO 7/1 connection Nominal heat output Type of SP connection Models construction Ø... -
Page 14: Electrical Appliance Technical Data
Testing and inspection port personnel. Our appliances have been designed and optimized, with Manufacturer Electrolux Professional SpA or any other laboratory testing, in order to obtain high performance and service centre authorised by Electrolux efficiency. Professional SpA. -
Page 15: Responsibility
Customer an operator instructed/trained by the Responsibility Care service Manufacturer and who, based on his The Manufacturer declines any liability for damage and or specialised professional and specific training, experi- malfunctioning caused by: personnel ence and knowledge of the accident- •... -
Page 16: Customer's Responsibilities
CAUTION 9. Secure the plate with two flat head M5 screws provided Before moving the appliance make sure (Fig.1F). the load bearing capacity of the lifting equipment used is suitable for its weight. Customer's responsibilities The tasks and works required of the Customer are: •... -
Page 17: Connection (Depending On The Appliance And/Or Model)
3. Install the tap/valve in an easily accessed place. (accessory code 927225) in an easily accessed position ahead of the appliance. The pressure regulator should preferably be fitted horizontally, to ensure the right outlet pressure. connection side gas from mains pressure regulator connection side gas towards the appliance The arrow on the regulator... -
Page 18: Primary Air Checking
(otherwise, follow the instructions given in E.6.6 Conver- 5. Regulate the adjustment screw until the pressure gauge sion to another type of gas paragraph of this section). shows the working pressure value (see paragraph E.6.5 Gas pressure regulator); The supply pressure must be measured while the appli- ance operates, using a pressure gauge (min. -
Page 19: E.10.3 Power Cable
The contact opening max. distance and leakage current must The screw is marked with the symbol comply with the local safety regulations. E.10.3 Power cable E.11 Safety thermostat Unless otherwise specified, our appliances are not equipped with a power cable. Appliances equipped with safety thermostat (overheating safety thermostat) that trips off automatically when temper- The installer must use a flexible cable having characteristics... -
Page 20: Switching Off
Electrical models 3. About 20 seconds after lighting, release knob “A“; the pilot flame must stay alight. The control panel is composed of the following items: 4. Check lighting through sight hole “C“. If not lit, repeat the operation. = Temperature knob = Indicator of heating element NOTE! = Indicator on/off... -
Page 21: Periods Of Non-Use
NOTE! 2. To protect the finish of the chrome plated surface do not Replace the blade of the scraper whenever it is not use lemon or an excessive quantity of salt (as it contains perfectly sharp. chlorine) during cooking; 3. Only use stainless steel spatulas to place and remove Tanks and collection drawers (even several times a day) food on the plate;... -
Page 22: Repair And Extraordinary Maintenance
Pilot burner, thermocouple, igniter 1. Remove the knobs and control panel; assembly fry top 2. Replace the component. Fry top main burner 1. Remove the knobs and control panel; 2. Remove the cooking plate, firstly removing the thermostat bulbs; 3. Remove the clamp fixing the burner to the gas pipe and nozzle holder; 4. -
Page 23: Maintenance Contacts (Only For Australia)
For service and spare parts, please contact: • Diamond - Semak Food Service Equipment — 18, 87– 91 • Electrolux - Tom Stoddart Pty Ltd — 39 Forest Way, Hallam South Road, Hallam VIC 3803 — call 03-9796-4583 Karawatha QLD 4117 — call 1-300-307-289... - Page 26 Electrolux Professional SPA Viale Treviso 15 33170 Pordenone www.electrolux-professional.com...