Sealey FPS6 Instructions

thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 WARNING! Before use, ensure that there is nothing attached

to the front forks or the fairing of the motorcycle, that will foul

on the chock.

Maintain the chock in good condition (use an authorised service



agent).

replace or repair damaged parts. Use genuine parts only.



Unauthorised parts may be dangerous and will invalidate the

warranty.

Locate the chock in a suitable area. Keep area clean and tidy and



free from unrelated materials and ensure that there is adequate

lighting. Also ensure that the floor/ground is level and strong

enough (preferably concrete) to take the weight of the chock and

the motorcycle.

 DO NOT mount the stand on tarmacadam, as the surface may be

unstable.

Keep the chock clean for the best and safest performance.



Maintain correct balance and footing whilst positioning the



motorcycle in the chock.

Ensure that the floor is not slippery and wear non-slip shoes.



Ensure that the motorcycle is adequately secured to the chock if



to be used for transportation purposes.

Keep children and unauthorised persons away from the work area.



 DO NOT use the chock for a purpose it is not designed to perform.

 DO NOT operate the chock if it is damaged.

 DO NOT use the chock when you are tired or under the influence

of alcohol, drugs or intoxicating medication.

 DO NOT allow untrained persons to operate the chock.

DO NOT make any modifications to the chock.



Before removing a motorcycle from the chock, ensure that there



are no obstructions or persons in the path of the motorcycle.

InstructIons for:

MOTORCYCLE FRONT WHEEL CHOCK

MoDEL no:

2. INTRODUCTION & SPECIFICATION

2.1.

Introduction:

features adjustable pivoting wheel guide, which secures

front wheel within chock. three adjustable heights depending

on diameter of wheel. suitable for wheels with tyre widths

90-130mm and diameters 430-535mm. frame bolts to the

floor using fixings included, stabilising motorcycles without

the need for side or centre stands. Base features lashing

strap gap for securing the motorcycle in transport.

2.2.

Specification:

Model No: ........................................................................FPS6

Minimum/Maximum tyre width: ................................ 90-130mm

Minimum/Maximum tyre diameter: ........................ 430-535mm

fig.1

Original Language Version

FPS6

fig.2

fPs6 Issue: 2 - 29/02/12