Table of Contents
51.0
RF Keyfobs
RF keyfobs (two- and four-button keychain keypads) are managed internally by the control panel. Keyfobs are assigned to
PINs (users) by entering IDs. No other programming parameters are required. Keyfobs generally follow the authority level and
area assignment for the PIN they are assigned to.
RF keyfobs report low battery conditions using the user number (1 to 32). The user's ID number, not the transmitter number, is
used for open/close reports. Each receiver can handle 24 keyfobs. For 32 keyfobs, two RF Receivers are required. Address
2938 must be set to a value from 1 to 14.
To add an RF keyfob into the system, see Adding RF ID Codes on page34 for more information.
RF Keyfob Receiver Assignment Options
• Address: 2938
• Default: 8
• Selections: 1-14
RF Keyfob Receiver Assignment Options
No Options Selected (all RF on Receiver 1)
Assign Keyfobs 1-8 to Receiver 2
Assign Keyfobs 9-16 to Receiver 2
Assign Keyfobs 17-24 to Receiver 2
Assign Keyfobs 25-32 to Receiver 2
This parameter assigns keyfobs in groups of eight to RF Receiver 2. Keyfobs not assigned to RF Receiver 2 are automatically
assigned to RF Receiver 1.
RF Keyfob Options
• Address: 2939
• Default: 15
• Selections: 0, 1, 3, 4, 5, 7, 8, 9, 11, 12, 13, 15
RF Keyfob Options
No Options Selected
Panic Enabled
Alarm Output on Panic
Assign [O] (trapezoid) key to Perimeter Only On
Assign [P] key to Partial On
This parameter configures all keyfobs for all areas and all PINs.
• Panic Enabled: This option configures the system's response to the RF panic signal. Pressing the Lock and Unlock keys
on the keyfob simultaneously transmits a unique Panic signal to the RF Receiver. If the keyfob Panic option is enabled, the
system sends a Duress report. Duress reports from keyfobs follow ABC Keys/Duress Report Routing (see Help Function Key
and Duress Report Routing on page 71 and Duress Reporting Options on page 70).
• Alarm Output on Panic: If this option is enabled, the keyfob activates the alarm output when the Lock and Unlock keys are
simultaneously pressed. The "Panic Enabled" option must enabled.
• Assign [O] (Trapezoid) Key to Perimeter Only: If this option is enabled, the keyfob arms the system Perimeter Only when
the [O] key is pressed. If you select this option, you cannot use the [O] key to activate Output Function 1|15.
• Assign [P] (Sun) Key to Partial On: If this option is enabled, the keyfob arms the system Partial On when the [P] key is
pressed. The [P] key on the RF keypads is also configured by this option. If you select this option, you cannot use the [P] key
to activate Output Function 2|0.
Page 102
P/N: 4998152533-02
PART IV: CONTROL PANEL PROGRAMMING
0
0
•
Copyright 2007 Bosch Security Systems, Inc.
Enter This Data Digit to Select Options
1
2
3
4
5
6
7
8
•
•
•
•
• •
• •
• • • •
• • • • • • •
Enter This Data Digit to Select Options
1
2
3
4
5
6
7
8
•
•
•
•
•
•
• •
•
• •
9 10 11 12 13 14 15
•
•
•
• •
•
• • •
9 10 11 12 13 14
15
•
•
•
•
•
•
• •
•
• • •
•
DS7200V2-UK Installer's Guide
Hide quick links:
Chapters
Table of Contents
