General Operation; Audio Control; Audio Setup - Kenwood KDC-W5541U Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-W5541U:
Table of Contents

General Operation

Audio Control

You can adjust following Audio Control items;
Adjustment Item Display
Rear volume*
"R-VOLUME"
Subwoofer level
"SUB-W L"
Bass Boost**
"B.BOOST-L"
System Q
"NATURAL"/
"USER"/"ROCK"/
"POPS"/"EASY"/
"TOP40"/"JAZZ"
Bass level
"BASS L"
Middle level
"MID L"
Treble level
"TRE L"
Balance
"BALANCE"
Fader
"FADER"
Exit Audio Control mode (Volume control mode)
*Function of KDC-W5641U/W5541U/W5141U/W5041U.
**Function of KDC-W4141/W4041.
• "USER": The customized Bass, Middle, and Treble levels
are effective. On the KDC-W5641U/W5541U/W5141U/
W5041U, this item can be selected at any time. On the
KDC-W4141/W4041, this item is displayed only when
the tone quality has been adjusted. On the KDC-W4141/
W4041, this item disappears when another setting is
selected.
• You can set Bass, Middle, and Treble for each source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the Control knob.
3
Select the Audio item to adjust
Press the Control knob.
4
Adjust the Audio item
Turn the Control knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the Control knob or 0
button.
6
|
KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041
Range
0 — 35
–15 — +15
"L1"/"L2"/"OFF" (The
indicator turns on according to
the setting.)
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15

Audio Setup

You can set Sound system , such as follows;
Adjustment Item
Display
Front High Pass Filter* "HPF F"
Rear High Pass Filter*
"HPF R"
Low Pass Filter
"LPF SW"
Subwoofer Phase*
"PHASE"
Volume offset
"V-OFFSET" –8 — ±0 (AUX: -8— +8)
Loudness*
"LOUDNESS" OFF/ON
Dual Zone System*
"2ZONE"
*Function of KDC-W5641U/W5541U/W5141U/W5041U.
*1KDC-W5641U/W5541U/W5141U/W5041U only.
*2KDC-W4141/W4041 only.
• Volume offset: Sets each source's volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by "ZONE2" of
System> (page 11).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by
(page 6).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the Control knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the Control knob.
4
Adjust the Audio setup item
Turn the Control knob.
5
Exit Audio Setup mode
Press the Control knob for at least 1 second.
Range
Through/80/100/120/ 150/180
Hz
Through/80/100/120/ 150/180
Hz
60*1/80/120/160*2/Through Hz
Reverse (180°)/ Normal (0°)
OFF/ON
Table of Contents
loading

Table of Contents