Page 1 Satellite ® Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 189 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares, that the product: PLU10* conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 TouchPad is a trademark of Synaptics, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...41 Precautions...41 Important information on your computer’s Setting up your computer ...44 Setting up your software...45 Registering your computer with Toshiba ...46 Setting up other devices ...46 Connecting to a power source ...47 Charging the main battery...50 cooling fan ...44...
Page 27 Using the computer for the first time ...51 Opening the display panel ...51 Your computer’s features and specifications ...52 Turning on the power...52 Adding memory (optional) ...53 Installing a memory module ...54 Removing a memory module...59 Using the TouchPad Scrolling with the TouchPad Control buttons ...62 Disabling or enabling the TouchPad ...62 Using the Dual Mode Pad ...64...
Page 28 Contents Caring for your computer...83 Cleaning the computer ...83 Moving the computer...83 Using a computer lock ...83 Chapter 2: Learning the Basics... 85 Computing tips ...85 Using the keyboard ...87 Character keys ...87 Making your keyboard emulate a full-size Ctrl, Fn, and Alt keys ...88 Function keys...88 Windows special keys...89 Overlay keys...89...
Page 29 Removing a disc with the computer off ...106 Caring for CD or DVD Discs ...106 Toshiba’s online resources ...107 Chapter 3: Mobile Computing...108 Toshiba’s energy-saver design...108 Running the computer on battery power ...108 Battery Notice ...109 Power management ...110 Using additional batteries ...110 Charging batteries...111...
Page 30 Contents Chapter 4: Exploring Your Computer’s Features...128 Exploring the desktop ...128 Finding your way around the desktop ...129 Setting up for communications...131 Connecting the modem to a telephone line ...133 Connecting your computer to a network ...134 An overview of using the Internet ...137 The Internet ...137 The World Wide Web ...137 Internet Service Providers...138...
Page 31 Quickly creating a new power profile ...166 Customizing a power profile ...166 Mouse Utility...167 TOSHIBA Hotkey Utility...168 TOSHIBA Hardware Setup...168 TOSHIBA Zooming Utility...170 TOSHIBA SD Memory Card Format Utility ...172 TOSHIBA Button Controls ...173 CD/DVD Drive Acoustic Silencer ...174 TOSHIBA Accessibility ...175 Fingerprint Authentication Utility...176 ®...
Page 32 Contents Fingerprint utility limitations ...176 Fingerprint Enrollment ...176 Fingerprint Logon ...178 Power-on Security ...178 Control Center...180 Password Bank ...182 Care and maintenance of your fingerprint Fingerprint sensor limitations ...188 Chapter 6: If Something Goes Wrong...189 Problems that are easy to fix ...189 Problems when you turn on the computer...191 The Windows working...193...
Page 33 Wireless networking problems ...216 DVD operating problems...219 Develop good computing habits ...222 Data and system configuration backup If you need further assistance...229 Before you contact Toshiba ...229 Contacting Toshiba ...230 Other Toshiba Internet Web sites...231 Toshiba’s worldwide offices...232 Appendix A: Hot Keys... 234 Volume Mute ...234...
Page 34 Appendix C: Using ConfigFree Computer...244 Getting Started...245 Starting ConfigFree ...245 ConfigFree Utilities...247 Connectivity Doctor ...247 Search for Wireless Devices ...250 Profile Settings ...255 ConfigFree SUMMIT...259 Quick Connect...263 Using the Automatic Switch...266 Semi-Automatic Switch Feature ...266 Glossary...268 Index...283 ™ with your Toshiba...
Page 35: Introduction
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you This product is compatible with European Union Directive NOTE 2002/05/EC. Restriction of the use of certain Hazardous...
Page 36 Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 37: This Guide
This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end. ❖ Skim through and stop when a topic interests you. ❖ Use the table of contents and the index to find specific information.
Page 38: Other Icons Used
Other documentation Your computer comes with the following documentation: ❖ An electronic version of the user’s guide ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com.
Page 39: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 189.
Page 40: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 41: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 42 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 43 Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer.
Page 44: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 45: Setting Up Your Software
To register your computer online or to sign up for an Internet account, you must either establish a Local Area Network (LAN) connection, or connect the built-in modem to a telephone line (see line” on page Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 46: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 47: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 49 Connecting to a power source The AC power light on the indicator panel glows blue. Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable; never place a cord/cable near a heat source;...
Page 50: Charging The Main Battery
Getting Started Charging the main battery NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack.
Page 51: Using The Computer For The First Time
Battery life and charge time may vary depending on the NOTE applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right.
Page 52: Your Computer's Features And Specifications
Getting Started Using the computer for the first time the brightness of the screen will deteriorate. This is also an intrinsic characteristic of the screen technology. When the computer is operated on battery power, the screen will dim and you may not be able to increase the brightness of the screen while on battery power.
Page 53: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. Getting Started Adding memory (optional)
Page 54: Installing A Memory Module
Getting Started Adding memory (optional) NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a standard Phillips No.
Page 55 If the computer is on, begin at step 1; otherwise, skip to step Click Start, Turn off (or Shut down - depending on the system). The Turn off computer window appears. Click Turn Off. The operating system turns off the computer. Unplug and remove any cables connected to the computer, including the AC adapter.
Page 56 Getting Started Adding memory (optional) Front of computer Sample unscrewing the memory module slot cover Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 57 The socket contains two slots. You can insert the module into NOTE any available slot. Hold the memory module by its edges so that the gold connector bar faces the slot at a slight angle to the socket. clip Sample inserting the memory module into the socket Check that the module is inserted completely into the socket and lined up squarely with the socket clips.
Page 58 Getting Started Adding memory (optional) Gently press down on the memory module connector until the clips snap into place. Front of computer Sample inserting the memory module into the slot Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place.
Page 59: Removing A Memory Module
Turn the computer right side up. Reconnect the cables. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module.
Page 60 Getting Started Adding memory (optional) The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for at least ten seconds, then turn the power on again.
Page 61: Using The Touchpad
Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ Because the TouchPad is much smaller than the display NOTE screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons.
Page 63 The Control Panel window appears. Click Printers and Other Hardware. Click the Mouse icon. Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. Sample TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes.
Page 64: Using The Dual Mode Pad
Getting Started Using the Dual Mode Pad Using the Dual Mode Pad (Available on certain models) The Dual Mode Pad (available on certain models), the small square cutout located in front of the keyboard, is sensitive to touch. To move the cursor, simply move your finger on the Dual Mode Pad in the direction you would like to move the cursor: ❖...
Page 65: Scrolling With The Dual Mode Pad
Scrolling with the Dual Mode Pad There are two active regions on the Dual Mode Pad that allow you to scroll as you would with any wheel device on a mouse or trackball. To scroll vertically, run your finger up or down along the right edge of the Dual Mode Pad.
Page 66: Using The Virtual Buttons
Getting Started Using the Dual Mode Pad ❖ Maximize the current application ❖ Run a program of your choice Tap zones can be enabled or changed in the Mouse Properties dialog box. Using the Virtual Buttons The Dual Mode Pad has six virtual buttons and a volume control bar.
Page 67: Disabling Or Enabling The Dual Mode Pad
Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level. When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons. The virtual buttons cannot be used until the mode switch button is tapped again.
Page 68: Using External Display Devices
Getting Started Using external display devices The Fn + F9 shortcut can be used to disable or enable the Dual NOTE Mode Pad (see Mode Pad” on page Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video port: ❖...
Page 69: Directing The Display Output When You Turn On The Computer
Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 70: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Page 71: Connecting A Local Printer
Connecting a local printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 72: Setting Up A Printer
Getting Started Connecting a local printer Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. Plug the printer’s power cable into a live AC outlet. Setting up a printer Some printers require a specific installation process.
Page 73: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes. Sample optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 74: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/ or drive.
Page 75: Hibernation Mode
❖ If you have work in progress and are not connected to a network, use the Windows commands to save your system settings so that, when you turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off.
Page 76 Getting Started Turning off the computer For information on placing your computer into, and configuring your computer for, Hibernation mode see and configuring Hibernation mode” on page Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off.
Page 77: Using The Turn Off Computer Or Shut Down Commands
Using the Turn Off Computer or Shut Down commands Depending on the operating system installed, use the following steps to turn off your computer. Turn Off For Windows Professional or Windows domain server, follow these steps to turn off the computer: Click Start, select Turn off computer.
Page 78 To use this method, you first need to activate it using Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Sample setup action settings screen Select the options you want from the drop-down lists.
Page 79: Using And Configuring Hibernation Mode
Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page Once the computer is configured, you can turn it off by either pressing the power button or closing the display panel, depending on the options set.
Page 80 To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖...
Page 81: Using And Configuring Standby Mode
Standby mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance.
Page 82: Closing The Display Panel
Getting Started Turning off the computer Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. ❖ When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button.
Page 83: Caring For Your Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Getting Started Caring for your computer...
Page 84 Getting Started Caring for your computer Sample computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop.
Page 85: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 86 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 87: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 88: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Your computer’s keyboard has only one Most of the time, this does not matter. However, some programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: ❖...
Page 89: Windows Special Keys
Windows special keys Sample Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Windows key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 90: Using The Overlay To Type Numeric Data
Learning the Basics Starting a program Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.
Page 91: Starting A Program From The Start Menu
The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the Windows Click Start, then point to All Programs.
Page 92: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double- click the folder containing the program, in this case Program Files.
Page 93: Saving Your Work
In the Run dialog box: ❖ If you know the program’s location, type the command line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: then click OK.
Page 94: Saving Files
Learning the Basics Saving your work Saving files On the File menu of your Windows If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box.
Page 95: Printing Your Work
File names The Windows XP operating system supports long file names which can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % &...
Page 96: Backing Up Your Work
Learning the Basics Backing up your work To print a file: If your printer is not on, turn it on now. Open the File menu of your Windows Print. The program displays a Print dialog box. Sample Print dialog box Specify the print parameters.
Page 97: Restoring Your Work
Using the CD-RW/DVD-ROM or multi-function drive HINT: Backing up all the files on your hard disk may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive. Small files can be backed up on diskettes if an optional external diskette drive is available.
Page 98: Cd-Rw/Dvd-Rom Or Multi-Function Drive Components
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive TECHNICAL NOTE: Your CD-RW/DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times.
Page 99: Media Control Buttons
Using the CD-RW/DVD-ROM or multi-function drive Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.
Page 100 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive The Internet Explorer button/CD/DVD button lets you access the internet when the computer is powered on or activates a media playing application that can play audio CDs or DVD movies when the computer is powered off. The following chart describes the Internet button/CD/DVD button functionality.
Page 101: Inserting A Compact Disc
Using the CD-RW/DVD-ROM or multi-function drive The play/pause button starts playing the disc or makes it pause if currently playing. The stop button stops a disc that is currently playing. Inserting a compact disc To insert a compact disc into the drive: Make sure the computer is turned on.
Page 102 If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 103: Playing An Audio Cd
Using the CD-RW/DVD-ROM or multi-function drive Playing an audio CD Insert an audio CD and close the disc tray. If the computer is turned on, Windows Media and the CD begins to play. You can use the Windows Media Player program to control the CD. To access the Windows Media Player, you can open it through the Start menu or activate it from the taskbar.
Page 104: Playing Cds Manually
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button. ❖ To stop the CD, click the Stop button. Before putting on headphones to listen to an audio CD, turn the volume dial down.
Page 105: Removing A Disc With The Computer On
PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific format compatibilities.
Page 106: Removing A Disc With The Computer Off
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Pull the tray out until it is fully open, remove the disc, and place it in its protective cover. Gently push the tray in to close it. Removing a disc with the computer off Insert a slender object, such as a straightened paper clip, into the manual eject hole.
Page 107: Toshiba's Online Resources
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 108: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 109: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 110: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 111: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 112: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 113: Monitoring Main Battery Power
The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working.
Page 114 Mobile Computing Monitoring main battery power ❖ Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used.
Page 115: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Toshiba Power Saver icon. The Power Saver Properties window appears. Monitoring main battery power...
Page 116: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power The remaining battery charge is indicated on the left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.
Page 117: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 118: Power Profiles
Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 119: Using A Hot Key To Set The Power Profile
Power Profile. The Power Profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Release the Monitoring main battery power “TOSHIBA Power Saver” on simultaneously to display the Power Profile key. Mobile Computing , press...
Page 120: Changing The Main Battery
The pop-up window disappears. You are now in the selected mode. For more information on setting the battery Power Profile, “TOSHIBA Power Saver” on page Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 121: Removing The Battery From The Computer
Removing the battery from the computer To remove the battery: Save your work. Power off the computer or place it in Hibernation mode according to the instructions in Hibernation mode” on page Unplug and remove any cables connected to the computer, including the AC adapter.
Page 122: Inserting A Charged Battery
Mobile Computing Changing the main battery Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 123: Taking Care Of Your Battery
If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. Sample inserting the battery Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer”...
Page 124: Maximizing Battery Life
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 125 Disconnect the AC adapter and turn on the computer’s power. If it does not turn on, go to step 4. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged.
Page 126: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777.
Page 127: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 128: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows start programs, find documents, set up system components, and perform most other computing tasks.
Page 129: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® Sample Windows XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 130 Exploring Your Computer’s Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 131: Setting Up For Communications
Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 132 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 133: Connecting The Modem To A Telephone Line
Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 134: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Connect the other end to the RJ-11 wall jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line.
Page 135 Exploring Your Computer’s Features Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations. To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications, and click New Connection Wizard.
Page 136 Exploring Your Computer’s Features Setting up for communications To enable the Ethernet LAN port, repeat steps one through four. Select the Use this device (enable) check box, and click Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services.
Page 137: An Overview Of Using The Internet
An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖...
Page 138: Internet Service Providers
Exploring Your Computer’s Features An overview of using the Internet Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Page 139: Surfing The Internet
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Page 140: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features ❖ Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Page 141: Using A Microphone
Using a microphone Connect an external microphone to the computer. Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder. Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 142: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 143: Using Pc Cards
Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. Your notebook computer comes with a PC Card slot and supports two types of PC Cards: ❖...
Page 144: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing a PC Card Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove.
Page 145: Setting Up A Pc Card For Your Computer
Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online help.
Page 146: Removing An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove.
Page 147: Using The Bridge Media Adapter Slot
Using the Bridge Media Adapter Slot (Available on certain models) The Bridge Media Adapter slot (available on certain models) supports the use of Memory Stick™ or Memory Stick™ PRO media, Secure Digital™ (SD™) Cards, MMC (MultiMedia Card) or xD-Picture Cards. This media can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc.
Page 148: Removing Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing memory media Prepare the media for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 149: Using The I.link® Port
Exploring Your Computer’s Features Using the i.LINK® port ® Using the i.LINK port ® The i.LINK port on the left side of the computer provides an extremely fast data transfer rate. ® In addition to high speed, the i.LINK port also supports isochronous data transfer (the delivery of data at a guaranteed rate).
Page 150: Chapter 5: Toshiba Utilities
Your computer includes several utilities designed to help you reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ TOSHIBA Assist ❖...
Page 151: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 152: Connect
Toshiba Utilities TOSHIBA Assist The TOSHIBA Assist offers four categories of options: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize Connect The features available in this category are: ❖ ConfigFree™ ❖ ConfigFree ❖ Bluetooth ❖ Bluetooth Local COM Settings Sample TOSHIBA Assist –...
Page 153: Secure
Secure The features available in this category are: ❖ User password ❖ Supervisor password Sample TOSHIBA Assist window – Secure tab Toshiba Utilities TOSHIBA Assist...
Page 154: Protect & Fix
Toshiba Utilities TOSHIBA Assist Protect & Fix The features available in this category are: ❖ PC Diagnostic Tool Utility Sample TOSHIBA Assist window – Protect & Fix tab Optimize The features available in this category are: ❖ Hotkey assignment using ❖...
Page 155: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Page 156: Using An Instant Password
Select your user name and enter your password, if any. Setting a user password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist. The TOSHIBA Assist window appears. On the left side, select Secure.
Page 157: Disabling A User Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 158 Toshiba Utilities Using a supervisor password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist. The TOSHIBA Assist window appears. On the left side, select Secure. Sample TOSHIBA Assist Security window Select the Supervisor Password icon.
Page 159: Deleting A Supervisor Password
Deleting a supervisor password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist. The TOSHIBA Assist window appears. On the left side, select Secure. Select the Supervisor Password icon. Select Not Registered. Type the correct password.
Page 160: Starting Fn-Esse
Toshiba Utilities Fn-esse ® Starting Fn-esse Click Start, All Programs, Toshiba, Utilities, Fn-esse, or click the Hotkey Assignment icon in the Optimize tab of TOSHIBA Assist. The Fn-esse keyboard appears. Sample Fn-esse window The keys are color-coded as follows: ❖...
Page 161: Using The Keyboard Or Pointing Device To Assign Keys
Using the keyboard, press and hold the press the desired assignment key. ❖ Using the pointing device, move the cursor over the desired key in the Fn-esse window and press the secondary button. Toshiba Utilities ® Fn-esse key, then plus...
Page 162 Toshiba Utilities Fn-esse The Assignment Type dialog box appears. Sample Fn-esse assignment type dialog box Follow the instructions in on page 162 Making a direct key assignment Select Direct... to display the Add/Edit Command dialog box. Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click Browse to specify this information.
Page 163: Viewing Existing Key Assignments
To change the key assignment, click Direct or Popup and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear. plus the appropriate key from within any ® program. Toshiba Utilities ® Fn-esse ®...
Page 164: Pc Diagnostic Tool Utility
Refer to the online help documentation within the application for any additional help. To start this utility: Click Start, All Programs, Toshiba, Utilities, then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of The PC Diagnostic Tool window appears.
Page 165: Toshiba Power Saver
The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 166: Preset Power Profiles
Toshiba Utilities TOSHIBA Power Saver Preset Power Profiles The preset power profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require.
Page 167: Mouse Utility
❖ Pointer options ❖ Hardware You may see additional categories depending on your particular pointing device. For information on these settings, “Using the TouchPad™” on page Adjust the settings as desired, then click OK. Toshiba Utilities Mouse Utility TOSHIBA Assist.
Page 168: Toshiba Hotkey Utility
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, Hotkey utility.
Page 169 The TOSHIBA Hardware Setup screen appears. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖ General—Allows you to view the current BIOS version or change certain settings back to their default values. ❖ Password—Allows you to set or reset a user password for the power-on process and for instant security.
Page 170: Toshiba Zooming Utility
Toshiba Utilities TOSHIBA Zooming Utility ❖ Battery Power—If your computer is running on battery power, the CPU frequency mode is set to low for slower processing. Switching the CPU to low allows you to conserve power and extend the operating time of your battery.
Page 171 The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the key and press For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. Toshiba Utilities TOSHIBA Zooming Utility TOSHIBA Assist.
Page 172: Toshiba Sd Memory Card Format Utility
This utility is used to format SD cards used with the Bridge Media Adapter Slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, SD Memory Card Format utility, or click the SD Memory Card icon in the Optimize tab of The SD Memory Card Format screen appears.
Page 173: Toshiba Button Controls
TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the TOSHIBA Assist and TOSHIBA Presentation buttons. Those buttons are located just above the function keys at the top of the keyboard. To access TOSHIBA Button Controls: Click the TOSHIBA Button Control icon in the Optimize...
Page 174: Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities CD/DVD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. When you change the CD/DVD drive to “Quiet” mode, the NOTE setting is only valid for the current Windows session.
Page 175: Toshiba Accessibility
Click Set Normal Mode to run the drive at normal speed, for transferring data. TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 176: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 177 ❖ Failed to verify the user. The fingerprint could not be matched. ❖ Error reading fingerprint—the finger was too far to the left or right. Center your finger and swipe it again. Toshiba Utilities Fingerprint Authentication Utility...
Page 178: Fingerprint Logon
Toshiba Utilities Fingerprint Authentication Utility ❖ Error reading fingerprint—the movement was skewed. Swipe your finger again in a straight line. ❖ Error reading fingerprint—the movement was too fast. Swipe your finger again at a slower speed. ❖ Error reading fingerprint—the movement was too short.
Page 179 Open the Control Center and go to Settings - System Settings. Select Logon. Check the Allow power-on security single sign-on check box. (Logon support must be enabled for this option to be accessible.) Toshiba Utilities Fingerprint Authentication Utility ® logon password.
Page 180: Control Center
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Management Fingerprints are stored in memory during enrollment. After a fingerprint is enrolled, it is displayed with a power-on button above it. The button appears “pressed in” by default, indicating that the corresponding finger will be used for power-on security.
Page 181 ❖ Help icon—Displays this help. The help files in other languages (depending on your installation) are located in the mui subfolder of your installation folder. ❖ About icon—Displays version information. Toshiba Utilities...
Page 182: Password Bank
Toshiba Utilities Fingerprint Authentication Utility Password Bank The Password Bank stores registration and logon information for Web sites and dialogs, helping to automate the task of entering this information. You enter the required information only once, during Web site or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the sensor.
Page 183 If you directly access a registered page from your browser without using the Biomenu’s Registered Sites option, Password Bank displays a hint that the page is registered and can be replayed. These hints can be turned off in the Password bank tab of the User Settings dialog. Toshiba Utilities...
Page 184 Toshiba Utilities Fingerprint Authentication Utility Replaying registrations with multiple forms Password Bank registers forms, not pages. If a page contains several forms, each form requires a separate registration. If a page contains several forms, replaying works as follows: ❖ If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed.
Page 185 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL then click Control Center.
Page 186: Care And Maintenance Of Your Fingerprint Sensor
Toshiba Utilities Fingerprint Authentication Utility If other fingerprint data is still displayed on the list, hold down the are all selected, then click Remove. Click OK to make the changes permanent. Check that all Fingerprint data was deleted on the Fingerprint Storage Inspector screen.
Page 187 The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. ❖ Check sliding position (see illustration below). Sample aligning the finger on the sensor Toshiba Utilities...
Page 188: Fingerprint Sensor Limitations
Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 189: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 190 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 191: Problems When You Turn On The Computer
To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard. Open Notepad (click Start, All Programs, Accessories and then click Notepad).
Page 192 If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 193: The Windows Operating System Is Not Working
The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 194: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 195: Internet Problems
The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 196: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 197: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 198: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: ❖...
Page 199 Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category. In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front.
Page 200: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 201: Power And The Batteries
Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 202 If Something Goes Wrong Resolving a hardware conflict The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. “Removing the battery from the computer” on page The battery may be too hot or too cold to charge properly.
Page 203: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 204: Display Problems
If Something Goes Wrong Resolving a hardware conflict Nothing happens when you press the keys on the external keyboard. You may have plugged the external keyboard in while the computer was turned on. Click Start, Shut Down or Turn off computer, and Restart the computer using the TouchPad on the internal keyboard.
Page 205 ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press priority is not set for the built-in screen. The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties.
Page 206: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 207 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds. To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties. The drive’s Properties box appears.
Page 208 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software.
Page 209: Cd-Rw/Dvd-Rom Or Multi-Function Drive Problems
CD-RW/DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly.
Page 210: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only).
Page 211 Most PC Card problems occur during installation and setup of new cards. If you are having trouble getting one or more of these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict”...
Page 212 If Something Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start.
Page 213 Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the Safely Remove Hardware icon on the System tray. Select the item you wish to remove. Click Stop.
Page 214: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper.
Page 215: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. If Something Goes Wrong Resolving a hardware conflict...
Page 216: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 217 ❖ Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. ❖...
Page 218 If Something Goes Wrong Resolving a hardware conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖...
Page 219: Dvd Operating Problems
The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 220 “Checking device properties” on page 199 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 221 Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 222: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 223: Data And System Configuration Backup In Windows Xp
Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals.
Page 224 If Something Goes Wrong Develop good computing habits In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. Windows creates the Restore Point and automatically stamps it with the current date and time.
Page 225 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 226 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 227 Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.) A list of your Favorites folders will appear, with the top-...
Page 228 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser).
Page 229: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 230: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 231: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 232: Toshiba's Worldwide Offices
Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Page 233 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices United Kingdom Toshiba Information Systems (U.K) Ltd.
Page 234: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 235: Password Security
Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 236: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 237: Power Usage Mode
This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the TOSHIBA Power Saver utility. For more informa- tion, see “TOSHIBA Power Saver” on page 165.
Page 238: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. ❖ Sample Standby confirmation box ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box.
Page 239: Hibernation Mode
Hibernation mode This hot key places the computer into Hibernation mode. ❖ Sample Hibernation confirmation box ❖ Hibernation mode If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 240: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ ❖ ❖ ❖ ❖ Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 241: Disabling Or Enabling Wireless Devices
Disabling or enabling wireless devices This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) Disabling or enabling the TouchPad or Dual Mode Pad This hot key enables/disables either the TouchPad or Dual Mode Pad.
Page 242: Keyboard Hot Keys
This hot key turns the Zooming utility to zoom- out. For more information, see ing Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see Utility” on page “TOSHIBA Zoom- 170. “TOSHIBA Zooming 170.
Page 243: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 244: Appendix C: Using Configfree
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 245: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. 259.
Page 246 Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 247: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 249 Using ConfigFree™ with your Toshiba Computer If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 250: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 251 Using ConfigFree™ with your Toshiba Computer Sample viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 253 Using ConfigFree™ with your Toshiba Computer Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 254 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 255: Profile Settings
Using ConfigFree™ with your Toshiba Computer Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 256 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to handle these networking environments.
Page 257 Using ConfigFree™ with your Toshiba Computer Enter any optional comments, if desired. Click Change Icon and select an icon for this profile. Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile.
Page 258 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 259: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 260 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 261 Using ConfigFree™ with your Toshiba Computer Sample of sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 262 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 263: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 264 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 265 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 266: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 267 Using ConfigFree™ with your Toshiba Computer To use the Semi-Automatic Switch feature: Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 268: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 269 direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte...
Page 270 Glossary SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 271 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 272 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 273 controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 274 Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 275 DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 276 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 277 icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device —...
Page 278 Glossary logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives. memory —...
Page 279 non-system disk — A disk for storing programs and data that cannot be used to start the computer. Compare system disk. online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet.
Page 280 Glossary processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties —...
Page 281 select — To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it. serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel.
Page 282 Glossary utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Page 283: Index
49 not charging 201 power usage hot key 119 power usage mode 237 real-time clock (RTC) 110 removing 121 BIOS setup see Toshiba Hardware Setup button power 52 start 130 creating 104 playing an audio 103 CD/DVD button functionality 100...
Page 284 Index channels DMA 197 IRQ 197 character keys 87 charging the battery 50 checking device properties 199 click 62 communications network connection 134 system resources 197 compact disc positioning 102 compact discs handling 102 inserting 101 removing 105 computer non-system disk or disk error message 193 not accessing disk drives 192 running on battery power 108...
Page 285 computer-friendly 40 error messages device driver conflict 196 general hardware problem 196 non-system disk or disk error problem with display settings/ current settings working with hardware program has performed an illegal operation 190 warning resume failure 192 Error-checking 207 Ethernet LAN port 135 expansion memory slot 56 exploring the desktop 128 external...
Page 286 Index safety 37 Industry Canada requirement 4 installation memory module 54 installing memory modules 53 mouse 70 instant passwords, using 156 Internet bookmarked site not found 195 connecting to 138 features 139 slow connection 195 surfing 139 uploading and downloading files 140 URL address not found 195 Internet Explorer icon 130...
Page 287 201 cannot insert diskette in drive cannot read a diskette 208 changing display properties checking device properties 199 computer hangs when PC Card computer will not power up 191 contacting Toshiba 229 Index cable Adapter 48 inserted 212...
Page 288 Index corrupted/damaged data files Device Manager 198 disabling a device 199 disk drive is slow 207 display is blank 204 external display not working external monitor 204 faulty memory 200 hardware conflict 196 high-pitched noise 210 illegal operation 190 Internet bookmarked site not found 195 Internet connection is slow 195 keyboard...
Page 289 157 system tray 131 taskbar 131 television adjusting display 70 Toshiba registering computer 46 worldwide offices 232 TOSHIBA Button Controls 173 Toshiba Hardware Setup 168 Toshiba online resources 107 Toshiba utilities 150 Index traveling tips 127 troubleshooting DVD player...

This manual is also suitable for:

A100-s2311td A100-s8111td A100-st1041 A100-st1042 A100-st3211 A100-st8211 ... Show all

Toshiba A100-S2211TD User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree

Quick Links

Related Manuals for Toshiba A100-S2211TD

Summary of Contents for Toshiba A100-S2211TD