Dc Fan (For Inside); Dc Fan (Thermal Head) - Sony UP-DR200 Service Manual
Digital photo printer
Hide thumbs
Also See for UP-DR200:
- Brochure & specs (16 pages) ,
- Specifications (2 pages) ,
- Operating instructions manual (31 pages)
Table of Contents
1-6-21. DC Fan (for inside)
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the side panel (R) assembly.
(Refer to Section 1-4-2.)
3. Remove the rear panel assembly.
(Refer to Section 1-4-3.)
4. Disconnect the two harnesses from the connectors
(CN17 and CN18) on the MEC-36 board.
5. Remove the four screws, then remove the two DC
fans.
n
When attaching the DC fans, place them with the label
side facing front.
MEC-36 board
6. Attach the DC fans (for inside) in the reverse order of
steps 1 to 5.
UP-DR200
DC fans
BVTT
3 x 10
Label side
CN17
CN18
Harnesses
1-6-22. DC Fan (thermal head)
1. Remove the cabinet. (Refer to Section 1-4.)
2. Remove the pinch motor assembly.
(Refer to Section 1-6-6.)
3. Remove the takeup drive assembly.
(Refer to Section 1-6-8.)
4. Remove the head unit assembly.
(Refer to Section 1-6-19.)
5. Remove the four screws, then remove the two DC
fans.
n
When attaching the DC fans, place them with the label
side facing up.
DC fans
6. Attach the DC fans (thermal head) in the reverse order
of steps 1 to 5.
BVTT
3 x 10
Label side
1-23
Table of Contents
