PARKIT360 Force Owner's Manual
  1. Manuals
  2. Brands
  3. PARKIT360 Manuals
  4. Lawn Mower
  5. Force
  6. Owner's manual

PARKIT360 Force Owner's Manual

Hide thumbs

Quick Links

Parkit360 Force
Owner's Manual
V2.6.2
loading

Summary of Contents for PARKIT360 Force

  • Page 1 Parkit360 Force Owner’s Manual V2.6.2...
  • Page 2 Parkit360 Force Owner’s Manual Introduction We know you’re busy, and need to get that trailer moved. Now. So with that in mind, we’ve kept these instructions as brief as possible, but they are important, so please take a moment and check them out.
  • Page 3 Parkit360 Force Owner’s Manual In The Box The Parkit360 Force is shipped in one box on a pallet. The main Parkit360 Force unit will be fully assembled. In addition to the main unit the box will also include: o Parkit360 Handle...
  • Page 4 Parkit360 Force Owner’s Manual Assembly Please follow these steps to assemble the Parkit360 Force using the assembled unit on page 2 as a guide: 1. Insert the handle into the main unit as shown. Tighten the Allen screws to secure the handle 2.
  • Page 5 Parkit360 Force Owner’s Manual 3. If you purchased the unit with the optional Battery Box, install it now. (Optional). The Parkit360 Force also has the option of being powered using your trailer battery. Skip this step if you are using your trailer battery to power the Parkit360 Force.
  • Page 6 Parkit360 Force Owner’s Manual The 80” cable must be connected across both batteries, and not just one. The easiest way to check, is to trace the wires and find the single wire (shown in red on picture) that connects the 2 batteries together. No other wires should be connected to these 2 terminals.
  • Page 7 Please read the following safety notes before operating for the first time. The Parkit360 Force is not recommended for use on hills due to the possibility of a runaway trailer. The Parkit360 has been tested on grades up to 6% (3% when using EZ Connect option).
  • Page 8 “Forward” this means that you are walking forward with the unit, which would mean that the trailer is backing up. The Parkit360 Force unit is controlled using a single three-position switch. The switch remains in the neutral position unless Forward or Reverse is pressed.

  • Page 9: Trailer Brakes

    Parkit360 Force Owner’s Manual Trailer Brakes: The Parkit360 Force features a connection for your trailer brake system. When connected and powered on, the trailer brakes will be engaged automatically whenever the unit isn’t moving. When the motor is activated, in either direction, the brakes are released automatically.
  • Page 10 Parkit360 Force Owner’s Manual Engaging the Wheels and Freewheel mode: The Freewheeling knob is used to change the wheels from engaged to freewheeling mode. Pull and turn the knob (clockwise) to put the unit into freewheeling mode. Pull and turn the knob (clockwise) to re-engage the wheels.
  • Page 11 Parkit360 Force Owner’s Manual Hooking up to the trailer: 1. Insert the ball mount into the receiver on the Parkit360 Force. 2. Install the Ball Hitch by threading it into the Ball Mount. The bottom shoulder of the Hitch Ball...
  • Page 12 Parkit360 Force Owner’s Manual 5. Make sure the weld spots are oriented as in the picture shown on the right. This orientation is important for safe use of the unit. 6. With your trailer jack, lower the trailer down onto the ball and lock it as you normally would.
  • Page 13 Caution The Parkit360 Force MUST BE SECURE under the trailer before you use it. If your Parkit360 Force is not sturdy under the trailer, you could damage the unit, your trailer, and cause serious injury, including death. Please be careful!
  • Page 14 2. Lower the trailer jack into the receiver 3. You’re ready to go! Important: With the jack, lower your trailer as close to the Parkit360 Force wheels as you can without them rubbing on the trailer frame. Doing this will reduce strain on the jack shaft.
  • Page 15 Parkit360 Force Owner’s Manual EZ Connect Option Please follow these steps to assemble and use the optional EZ Connect option: 1. The EZ Connect option will be shipped with the EZ Connect frame, wheels (with mounting hardware), and ball. 2. Mount the EZ Connect frame assembly into the Ball Mount Receiver as shown.

  • Page 16: Circuit Breakers

    Parkit360 Force Owner’s Manual Notes Battery The Parkit360 requires a 12-Volt battery: The recommended battery is a Group 24 deep-cycle RV or Marine battery with a capacity of 70-90 Ah. The battery is not included with the unit, and must be purchased separately.

  • Page 17: Maintenance

    A video showing the proper procedure for chain adjustment and tightening can be seen online at: http://youtu.be/8M4_NroWD-8 Warranty The Parkit360 comes with a 2-year replace or repair warranty. The warranty covers any factory defects on the Parkit360 Force. The warranty does not cover: 1.
  • Page 18 Warranty Claims. If a P360 Product fails to perform during the Warranty Period, Reseller must notify PARKIT360 in writing with full details of the defect or fault encountered with the P360 Product. PARKIT360 will provide technical assistance to Reseller to see if the issue can be resolved remotely.