Note: Detector response times and distances can be influenced Standard Features (High Temp. Model) by wind, smoke and viewing angle . Consult Firefly AB application • Relay contacts rated at 4 Amps @ 30 VDC (Resistive) . engineers for specific details .
The following is a partial list of fuels which emit ultraviolet and infrared Stainless Steel 13 lbs (6 .3 kg) radiation . Response time and detection distances vary . Consult Firefly AB applications engineers for specific details: Shipping weight: Aluminum Housing 6 lbs (2 .8 kg)
. Reference the section on the USI if you are not sure which option is best for your application or call a Firefly AB application engineer . New Installations: Note: In the case that the program option switch is left “ON” and the Starting with Revision E Software, when the detectors are in detector is installed on the network .
Page 11
1 Hz rate whenever a fault conditions exists . the manual test wiring and the test switch for broken, loose, or intermittent connections . Repair or tighten any faulty connections . If the light guides are not illuminated, then contact your Firefly AB Manual Test Failure: representative .
. proper installation, maintenance and use of the Omniguard® flame detectors, and agrees Firefly AB is not in any way liable for any special Detectors should be carefully packed to avoid damage from shock, incidental or consequential damages whatsoever .