Table of Contents
5
8.1.3 OPERATION OF SERVICE FACTORY MODE
Functions whose setting are set to OFF.
The settings for the following functions are set to OFF when Service Factory mode is entered
(Including when the "FAY" command is received) :
No.
1
Two screen operation
2
FREEZE
3
Mask control
ORBITER
4
5
Detection of the TRAP switch
6
TRAP history
7
Display of TV guide
8
Setting of Parental Control
Note) Enter the factory after canceling ACI because the ACI operation setting OFF and not done.
User data
User data will be treated as follows :
• User data on picture- and audio-quality adjustments are not reflected, and factory-preset data are
output (user data will be retained in memory). When the unit enters Service Factory mode, the
current audio-quality adjustment data will be still be retained in memory.
• As to data on various settings, user data will be applied to the items that are associated with signal
format change (screenize switching, etc).
• Data on screen (i.e.,screen position; meaning clock dividers, and not including data on screen size)
Are reset to the default values (data stored in memory will be retained). Screen size will be retained.
5
6
Function
Input function set on the main side is selected.
MTB/MB is none. It becomes processing on the PANEL side.
Central value operation.
The detection operation is stopped.
To a possible turning on though the memory is maintained.
When this is turned off, the block of the screen is released.
PDP-5071PU
6
7
Remarks
7
8
A
B
C
D
E
F
131
8
Hide quick links:
Table of Contents
