1. Manuals
  2. Brands
  3. Yard-Man Manuals
  4. Lawn Mower
  5. AutoDrive 604
  6. Operator's manual

Yard-Man 604 Operator's Manual page 10

Autodrive lawn tractor
Hide thumbs Also See for 604:
Table of Contents
ELECTRIC PTO
(POWER TAKE-OFF) KNOB
To engage the power to the cutting
deck or other attachments, pull
outward on the PTO knob. Push the
PTO knob inward to disengage the
power to the attachments.
NOTE:
The PTO knob must be in the disengaged
(OFF) position when starting the engine, when
shifting into reverse and if the operator leaves the
seat.
PTO (POWER TAKE-OFF) LEVER
The PTO lever is located on the left side of the
dashboard next to the steering wheel. Move the PTO
lever forward to engage the power to the cutting
deck or other attachments; move the PTO lever
backward (toward the rear of the tractor) to
disengage the power to the attachments.
NOTE:
The PTO lever must be in the disengaged
(OFF) position when starting the engine, when
shifting into reverse and if the operator leaves the
seat.
AUTODRIVE
PEDAL
™
The AutoDrive
pedal is located below the brake
™
pedal on the right front side of the tractor along the
running board. Depress the AutoDrive
your right foot when the tractor shift lever is in either
forward or reverse to cause the tractor to move.
Ground speed is also controlled with the AutoDrive
pedal. The further down the pedal is depressed, the
faster the tractor will travel. The pedal will return to
its original position when it's not depressed.
IMPORTANT:
Always set the parking brake
when leaving the tractor unattended.
BRAKE PEDAL
The brake pedal is located on the right front side of
the tractor above the AutoDrive
running board. The brake pedal can be used for
sudden stops or setting the parking brake.
NOTE:
activate the safety interlock switch when starting the
.
tractor
LIFT LEVER
The lift lever is used to change the operating position
(height) of the cutting deck. To operate, move the
lever to the left, then place in the notch best suited
for your application.
PARKING BRAKE BUTTON
To set the parking brake, fully depress
the brake pedal and push the parking
brake button in. Hold the button in
while taking your foot off the brake
pedal. Both the parking button and
the
brake
depressed. To release the parking
brake, depress the brake pedal
slightly. The parking brake button will
then return to its original position.
NOTE:
operator leaves the seat with the engine running or
the engine will automatically shut off.
pedal with
IMPORTANT:
™
when leaving the tractor unattended.
™
10
BRAKE
The brake pedal must be fully depressed to
pedal
will
then
The parking brake must be set if the
Always set the parking brake
pedal along the
™
P
stay
Table of Contents
loading

Related Manuals for Yard-Man 604

Related Products for Yard-Man 604

This manual is also suitable for:

U604h

Table of Contents