EANING OF THE INDICATION LED : ................10 EANING OF THE STATUS LED : ................... 10 EANING OF THE DIPSWITCH IP (+ GPRS) ..........11 SETTINGS ON THE LPHA ISION AlphaVision IP & IP + GPRS Quick reference Rev.1.0 01-11-2012 Page. 3...
Introduction The Installer manual for the AlphaVision IP (+ GPRS), given the size of this manual, is not included in the product package. This manual is available on request from the sales department or can be downloaded as a pdf version from the website. Go to Security Installers and then to Service &...
3 to ON (default) ensures that the programming can be accessed / modified. If dipswitch 3 is set to OFF then the webpage of the AlphaVision IP (+ GPRS) is completely blocked and it is not possible to get into the programming.
IP address. Login Once your browser has been opened, the login screen of the selected IP device is shown. For the AlphaVision IP (+ GPRS) transceiver it is the following screen: When dipswitch 2 is set to ON you can login using the user "admin". The Password field should be left empty.
Configuration wizard From firmware version 2.00 a configuration wizard has been introduced to the AlphaVision IP (+ GPRS) to be able to program the transceiver in 5 simple steps. Read the welcome screen carefully and make sure that all required information is present before you start programming.
Backup connection Central Station protocol (SIA-HS or Sec IP) IP-address, Registration port and Account number. Pin code simcard APN name Username Password Web interface Usersname Password AlphaVision IP & IP + GPRS Quick reference Rev.1.0 01-11-2012 Page. 8...
End of wizard Press Finish to save all settings, the AlphaVision IP (+ GPRS) will restart. Verify that the AlphaVision IP (+ GPRS) functions correctly. Through 'Advanced Settings', the System Status screen can be shown with a summary of the status of the device.
Meaning of the STATUS LEDs: LED number Colour Description Watchdog LED. Should be constantly illuminated to indicate that the LED OP1 green hardware functions correctly. Is turned off during flashing. AlphaVision IP & IP + GPRS Quick reference Rev.1.0 01-11-2012 Page. 10...
Setting Description ‘Normal’ position When dipswitch 1 is set to ON and the AlphaVision IP (+ GPRS) is powered up, the default settings will be programmed. ‘Normal’ position. The programmed web server- and Ethernet settings will be used. For access to the programming the programmed ‘Username’ and corresponding ‘Password’...