Table of Contents
Related Manuals for AnyCubic Wash and Cure
Summary of Contents for AnyCubic Wash and Cure
-
Page 2: Technical Specification
Technical Specification Model Wash and Cure Control Mode Touch button, LED Light Rated Power Input Voltage AC110/220V 50/60Hz UV LED 405nm(8)+365nm(8) Time Mode 2min 4min 6min Machine Size 220mm(L)*230mm(W)*370mm(H) Maximum Wash Volume 115mm(L)*65mm(W)*165mm(H) Maximum Curing Volume 140mm(D)*165mm(H) Net Weight ~5.7kg... -
Page 3: Safety Instruction
After cleaning, the models need air-dried before putting in the curing chamber. Be cautious when using the scraper. Never direct the scraper towards your hands. In case of emergency, please immediately cut off the power of ANYCUBIC machine and contact the technical support. -
Page 4: Packing List
Packing list Adjustable platform Platform holder 1PC Curing table 1PC holder 1PC Stainless steel Stainless steel Washing bucket Wash&Cure bearing 1PC washing basket 1PC After sale service Power adaptor/Power cord 1unit Tool kit 1unit User manual 1PC card 1PC ProductOverview ④... - Page 5 This machine (Wash & Cure) is suitable for washing and post-curing of printed objects of M-SLA 3D printers (such as the Anycubic Photon Series 3D printers). This machine has two working modes, wash and cure. The following describes the basic functions and operation precautions in different working modes. Please read the manual carefully before get started.
- Page 6 3.There are two cases for washing: Case 2: The printed objects has been removed from the Case 1: The printed objects are on the platform. Then please use the platform holder to secure the platform platform (suitable for small models). Then please use the washing basket to hold the printed objects.
- Page 7 The side with "ANYCUBIC" must to face forward 4.Touch the time icon to select the washing time, and then touch the start icon to start washing. (If the lid has been removed during the operation, the program will be paused. And the program will resume after cover back the lid.)
-
Page 8: Maintenance
3.Selectthecuringtime.(Generally,ifamodelhasadiameteroflessthan30mm,itisrecommendedtohave acuringtimeof2minutes.Ifthemodelhasaverycomplicatedsurfacestructure,itisrecommendedto increasethecuringtime.)Thentouchthestarticontostartcuringthemodel. ② ① Attention: ①If the lid has been removed during the operation, the program will be paused. And the program will resume after cover back the lid. In order not to affect the curing effect, please do not remove the lid during the curing process. -
Page 9: Troubleshooting
5.Touchtoswitchthemodebuttonofthemachine,thetwomodelightsarenotbright. ①Tryagainorrebootthemachine. Thank you for purchasing ANYCUBIC products! Under normal usage and service, the products and its parts have a warranty period up to one year. Please visit ANYCUBIC official website (www.anycubic.com) for more details and report any issues with ANYCUBIC products. Our professional after-sale service team...