Full manual showcasing how to troubleshoot, enter test programs, disassemble and reassemble, and each model description of old bosch washing machines (58 pages)
Disposal Information Disposing of the packaging DANGER OF SUFFOCATION! Disposing of your old appliance DANGER OF FATAL INJURY! Environmental Protection/Conservati on Issues Intended Use...
Your New Washing Machine Filling in laundry detergent and/or additive dispensers Dispenser I: Detergent for soaking agent. Dispenser II: Detergent for wash, stain remover. Dispenser Cleaning product, e.g. fabric softener, fabric conditioner (do not fill above the lower edge of insert 1). Opening ...
Control panel Buttons for additional options (in addition to the program if required) Power Wash: Extended washing time for best stain removal and cleaning results. Rinse Plus: Additional rinsing cycle. Quick Wash: Faster washing time for expediated cleaning results. Additional option selected: Indicator light is glowing red.
Before Using For the First Time Using For the First Time temp. boost Start/Pause Start/Pause Selecting the language Menu Cotton Power Menu Select Select English...
Preparing, Sorting and Loading the Laundry Preparing the laundry CAUTION Loose debris (e.g. coins, paper clips, needles, nails) can damage items of clothing as well as parts of the washing machine (e.g. drum). q Empty all pockets of the clothing. q Brush out any sand from pockets and cuffs.
Page 10
Intensive dirt Typical stains Removing stains Sorting laundry according to their care label specifications Fabric Types Ó Ô Ò Ì Temperatures Á Ê Â Ú...
Loading the laundry RISK OF EXPLOSION! Items of clothing that have been pretreated with solvent based cleaning agents, e.g. stain remover and dry cleaning spirit, represent an explosion hazard once loaded into the washing machine. Therefore, these items must first be rinsed thoroughly by hand.
Laundry Detergents and Additives Dispensing the correct amount of detergent RISK OF POISONING! Too little detergent: Too much detergent: Filling laundry detergent and/or additive dispensers...
Programs and Functions Basic programs Regular/Cotton Regular/Cotton Permanent Press Permanent Press Delicates Delicates Hand Washables Hand Washables Temperature Settings Power temp. boost Temp. boost warm cold Extra cycle program selector Spin Soak Drain spin No final...
Maximum spin speeds of the programs Revolutions Type of laundry/Extra cycle per minute 1200 Regular/Cotton Permanent Press Delicates Hand Washables 1200 Spin In the Regular/Cotton program the fabrics will be spun at the maximum possible spin speed. In the Permanent Press, Delicates and Hand Washables programs, the washing machine spins at low spin speed - for the gentle washing of the laundry.
Page 15
Indicator light in the Start/Pause" button The indicator light conveys the following information: Indicator light flashing red Program can be started. Putting in laundry is possible. Indicator light glowing red Program is running. Putting in laundry will be possible after pressing the Start/Pause button.
Washing with Standard Settings The specified standard settings are optimally adjusted to the selected program. If you do not want to change these standard settings: q Turn on the water taps. q Turn the program selector to the desired program. i If the time has not been set, Clock not set"...
Washing with Individual Settings You can adjust the settings to your requirements. First find a quick overview of the adjustable settings. Quick overview The steps for changing the settings are described in detail the following pages. Menu Select Menu Start/Pause...
Spin speed You can reduce the displayed spin speed. The maximum displayed spin speed depends on the selected program. See also information on Page 14. q Turn the program selector to the desired program. q Load the laundry and close the loading door. The Start/Pause indicator light flashes (red).
Program finished at q Turn the program selector to the desired pro gram. q Load the laundry and close the loading door. The Start/Pause indicator light flashes (red). q Select an additional option. Example: q Press the Menu button until, Program finished at"...
Reduced ironing Gentler spin with subsequent fluffing. After the spin cycle the laundry is arranged loosely in the drum - creasing is reduced. i Observe maximum load for each type of textile; remove the laundry as soon as the spin cycle is complete.
Page 21
Signal The acoustic signal indicates the start or end of the program, operating errors or malfunctions. You can specify the volume of the acoustic signal. q Turn the program selector to the desired program. q Load the laundry and close the loading door. The Start/Pause indicator light flashes (red).
Child lock You can secure your washing machine to prevent selected functions from being inadvertently changed. If the child lock has been selected: No changes can be made while the program is running, Should the appliance be switched off and on while a program is running the program will continue at the point at which it was interrupted,...
Page 23
You can change other settings q Press the Start/Pause button. The program starts. The indicator light shines (yellow). The child lock is activated. i The individual program steps are indicated in the display field. Deactivating temporarily the child lock q Press the Start/Pause button and hold down (5 seconds) until the Start/Pause indicator light flashes.
You can change other settings q Press the Start/Pause button. The program starts. The indicator light shines. i The individual program steps are indicated in the display field. Set clock You can set the current time. The settings are retained even if your washing machine is not used for up to 6 weeks.
q Press the Menu button until the minute display flashes. The Start/Pause indicator light flashes (red). q Press the Select button until the minute display is correct. The time is now set. i Press the Menu button, the menu function ends.
During Washing Reselecting a program q If the child lock is active, temporarily deactivate it; see page 23. q Turn the program selector to Off. q Turn the program selector to a newly selected program. The Start/Pause indicator light flashes. q If the child lock is active, deactivate again temporarily.
After Washing The Start/Pause indicator light goes out. Display field: Remove laundry". q Open the loading door. q Turn the program selector to Off. No final spin" preselected The Start/Pause indicator light flashes. q If required, change the spin speed; see from Page 18.
q Turn off the water tap. q Unload the laundry. i The child lock is reactivated as soon as the appliance is switched on again. CAUTION Occasionally check for any foreign objects (e.g. coins, paper clips) from the drum and rubber seal) - risk of rust! q Leave the loading door open to allow the inside of the washing machine to dry out.
User Maintenance Instructions Cleaning and Care RISK OF ELECTRIC SHOCK! Always disconnect the appliance from the mains before cleaning. Never clean the washing machine with a jet of water. RISK OF EXPLOSION! Never use solvents to clean the appliance. Cleaning the appliance housing and control panel As required: q Use hot soapy water or a mild, non abrasive...
q Attach the insert and lock into position. q Insert the detergent dispenser. Cleaning the drain pump This is necessary if the water cannot be drained completely. The pump is either blocked by loose debris or lint which accumulates if lint giving fabrics are washed.
q Carefully remove the pump cap. q Remove any loose debris/lint from inside the pump and clean the pump. The pump impeller must be able to rotate. Clean any remaining water or lint from the threads of the pump cap and pump housing. q Attach and tighten the pump cap.
Cleaning the strainer(s) at the water tap On both the hot and cold water tap: q Disconnect the hose from the water tap. q Rinse the strainer under flowing water. q Reconnect the hose. Cleaning the strainers on the washing machine On both the hot and cold water tap: q Disconnect the hose from the back of the washing machine.
Troubleshooting of Minor Faults RISK OF ELECTRIC SHOCK! Repairs must only be carried out by our Customer Service or an authorized technician. Fault Possible cause The loading door No final spin" selected. cannot be opened. Child lock activated. Power failure. Program is running and/or the door is locked for reasons of safety.
Page 36
Fault Possible cause Action Select Start/Pause Start/Pause Start/Pause Start/Pause Start/Pause Menu...
Fault Possible cause Fault displays Text in display field Possible cause If the fault cannot be eliminated with the aid of the above table: switch the appliance off, wait 5 seconds, switch the appliance on again, select and start the program. Action Power Wash Action...
Installation, Connection and Transportation Safety information RISK OF INJURY! Factory supplied equipment CAUTION...
Page 40
Any dampness lift inside the drum was caused by the final testing which every washing machine is subject to before leaving the factory. On the rear of the appliance: Water drain hose. Mains cable with plug. Elbow for attaching the drain hose, e.g. into a wash basin.
Built in Installation The appliance can be built in; that is, you can install the washing machine under counter in a kitchen cabinet opening. 570 mm minimum // 22 b 600 mm minimum // 23 850 mm minimum // 33 Minimum Installation Clearances Alcove or Under Counter Counter...
Completely remove transport bolts 1 and 2 (bolts, washers and bushes). q Completely remove transport bolt 3 (bolt, spring, washer and bush) by reaching through the open washing machine door and pulling the drum slightly forward. q Insert the covers.
Hose and cable lengths Left hand connection approx. 39" (100 cm) approx. 56½"(145 cm) approx. 35" (90 cm) Right hand connection approx. 56½" (145 cm) approx. 39" (100 cm) approx. 48¾" (135 cm) Other hoses Water connection Water supply CAUTION CAUTION always...
Page 45
Check seal with tap fully open. Water drainage Do not bend or pull the water drainage hose. Height difference between the placement area of washer and the drainage point: min. 10 mm Maximum 110 cm // 43 inches. Standpipe or In Wall Installation q Use the U bracket.
Drainage into a wash basin CAUTION The plug must not block the drain of the wash basin. q Secure the water drainage hose so that it does not slide out. q When the water is being drained, check whether the water flow is fast enough. Electrical connection GROUNDING INSTRUCTIONS This appliance must be grounded.
WARNING To reduce the risk of fire or electrical shock, DO NOT use an extention cord or an adapter to connect the washer to the electrical power supply. In the event that an earth leakage circuit breaker is to be used, only use types marked with the...