Installing the VROC module
Plug-in the VROC module to the system board.
Intrusion switch
Removing the Intrusion switch
1. Follow the procedure in
2. Remove the:
a.
side cover
b.
front bezel
c.
5.25 inch ODD bracket
3. To remove the intrusion switch:
a. Disconnect the intrusion cable [1] from the I/O module.
b. Remove the screw [2] that secures the intrusion switch to the chassis.
c. Lift the intrusion switch and remove it from the chassis.
NOTE:
The system will not power on without the intrusion switch installed.
46
Removing and installing components
Before working inside your
computer.