Water Inlet Valve Disassembly - Toshiba DWS-22A Series Service Manual

Part name

Funtion

Steps of Disassemble

Bottom view

1. Disconnect the power supply to the dishwasher

and then remove bottom cover.

2. Disconnect 2 wiring harnesses(mark 1).

3. Remove the snap ring(mark 2).

4. Remove valve by rocating it.

Technical Data

Water Inlet Valve

The inlet valve is electromagnetic valve that decide whether water enter or not. Valves are

normally closed. Each time the appliance requires water, the controller will convey an

electric signal to the coils to open the valve.

The inlet valve consists of electric coil, valve body, valve pole, filter etc.

In a word, the electromagnetic valve can act to allow water enter into machine, when it

receives the order given by controller.

Nominal voltage

Frequency

Resistance

Work duty

Flux

AC 220-240V

50/60Hz

1kΩ

100%ED T25

3min/5min T60

2.5L/min ±15％

24