Table of Contents
EDITING MINIDISCS
Titling a recorded MiniDisc
[Operate with the battery charge stand or remote control.]
( ) indicates operations on the remote control.
Creating a disc name
1. Insert a recorded MiniDisc and cancel the group mode.
2. Press the MENU button.
3. Select "NAME" by pressing the
and press the ENTER (
4. Select "DISC NAME" by pressing the
ton and press the ENTER (
You can enter characters now.
5. Press the DISP button to select the type of characters.
Katakana
Alphabetic characters (capital letters)
Alphabetic characters (small letters)
symbols
6. Select a character by pressing the
and press the ENTER (
Repeat the operation to enter other characters.
7. After entering all characters, hold down the ENTER
(
) button for 2 seconds or more.
The disc name is created.
Creating a group name
1. Insert a group-recorded MiniDisc.
2. Press the MENU button.
3. Select "GrSELECT" by pressing the
ton and press the ENTER (
4. Press the ENTER (
"
" will flash.
5. Within 5 seconds, select the group to be named by
pressing the
130
(pages 70 - 81)
(pages 70 - 74)
or
) button.
or
) button.
Numbers and
or
) button.
or
) button.
) button.
or
button.
6. When "
" lights on, press the MENU button.
7. Select "NAME" by pressing the
and press the ENTER (
8. When "GROUP NAME" appears, press the ENTER
(
) button.
You can enter characters now.
9. Enter characters in the same procedures as steps 5 – 6
in "Creating a disc name".
button
10.After entering all characters, hold down the ENTER
(
) button for 2 seconds or more.
but-
The group name is created.
Creating a track name
1. While in the stop mode or pause mode, select the track
by pressing the
2. Press the MENU button.
3. Select "NAME" by pressing the
and press the ENTER (
button
4. Select "TRACK NAME" by pressing the
button and press the ENTER (
You can enter characters now.
5. Enter characters in the same procedures as steps 5 – 6
in "Creating a disc name".
6. After entering all characters, hold down the ENTER
(
) button for 2 seconds or more.
The track name is created.
To add a character:
but-
1. Set the unit to the character input mode.
2. Press the – or + to select the character before which
you wish to add another character.
3. Select the character you wish to add.
4. Hold down the ENTER (
more.
PORTABLE MD RECORDER DMC-S9NET
or
) button.
or
button.
or
) button.
or
) button.
) button for 2 seconds or
button
button
Table of Contents
