CLEARPOINT
®
3eco
coalescing filter
9.4 Replace the float drain
For float drain replacement to be carried out, the following prerequisites must be fulfilled and the preparatory tasks
must have been completed.
Tools
•
Screwdriver - cross-head
size 2.5 mm
1.
Open the bypass pipe if available
1.
2.
Automatic discharge
32 | 56
•
New float drain with adapter
enclosed
Preparation of installation
Figure
Mechanically open
Prerequisites
Material
Description
1.
1. Close the shut-off valves upstream and downstream of
the filter or the respective system section
2. Set the knurled screw on the float drain anti-clockwise
(left-hand thread) from >>Automatic discharge<< to
>>Mechanical open<<
Installation and operation manual
Protective equipment
•
Protective gloves (fluid-
resistant)
•
Safety goggles with side shields
•
Hearing protection
•
Respiratory protection,
protection class FFP 3
•
Safety footwear