1. Manuals
  2. Brands
  3. Uplift Desk Manuals
  4. Indoor Furnishing
  5. V2
  6. Manual

Uplift Desk V2 Manual

Standard 3-leg standing desk frame for 2-piece l-shaped desks
Hide thumbs Also See for V2:
Table of Contents

Quick Links

V2 Standard 3-Leg
Standing Desk Frame
for 2-Piece L-Shaped Desks
For assembly assistance,
visit upliftdesk.com/3leg-srd-lshp or call 800-349-3839
Patent Pending, ©2018 UPLIFT Desk®. All Rights Reserved
®
two person
assembly
Table of Contents
loading

Related Manuals for Uplift Desk V2

Summary of Contents for Uplift Desk V2

  • Page 1 ® V2 Standard 3-Leg Standing Desk Frame for 2-Piece L-Shaped Desks two person assembly For assembly assistance, visit upliftdesk.com/3leg-srd-lshp or call 800-349-3839 or email [email protected] Patent Pending, ©2018 UPLIFT Desk®. All Rights Reserved...
  • Page 2 Thank you for choosing UPLIFT Desk. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...

  • Page 3: Safety And Warnings

    Under no circumstances does the manufacturer accept warranty or liability claims for damages caused from improper use or handling of this desk. Provide this manual to any new user. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 4 M8x10 Cable M6x35 Support bracket #10x5/8’’ Allen wrench Machine screw Machine screw Wood screw mount Dogbone bolt (qty 4) (qty 4) (qty 4) (qty 15) (quantity varies per desktop) © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 5 Return desktop against the Main desktop. Note: The holes for the Keypad should be facing the inside. Note: If assembling a Custom Solid Wood L-Shape desk, refer to page 16 for special instructions. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 6 Once both screws have been started, tighten them and the two screws from Step 6 all the way using the 4mm Allen wrench (H6). © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 7 Insert two Crossbar rails (C6) into the Right Leg assembly. Ensure the Center indicator marks in the middle of each rail are facing up, and that the slots on each rail are pointing inward, facing each other. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 8 *Note: when assembling a Left-return desk, do NOT put a screw into the hole on the Long corner crossbar end (C12). This will be done later after the desk is upright. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 9 Tighten them all the way. Be careful to not over-tight- en, to avoid stripping. Do NOT use the Set screws yet to secure the Crossbar rails. This will be done in a later step. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...

  • Page 10: Accessory Installation

    Note: DRILL NO DEEPER THAN 1/2”. To ensure 1/2’’ this, we recommend wrapping a piece of tape around your drill bit 1/2” from the tip. Stop drill- ing just before the tape touches the desktop. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 11 Once all four screws have been started, tighten all the way using the 4mm Allen wrench (H6). Repeat this step for all three Feet. Note: If you purchased Casters, remove the leveling pads and install the Casters now. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 12 Support bracket (H11) on the the Return desktop. Then separate the Return assembly from the Main assembly. Note: If assembling a Custom Solid Wood L-Shape desk, refer to page 16 for special instructions. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 13 Be careful not to apply any downward pressure on the return while holding it in place. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 14 Attach Cable mounts to the inside of frame parts. You might want to save some for when you have other corded devices and accessories plugged in and on your desk. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 15 Your desk is now ready for use! If you are using a Memory keypad, see additional key- pad instructions for further information on how to use your keypad. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...
  • Page 16 Insert the Dogbone bolts (H11) into the cutouts, and tighten with a wrench. Depending on the cut of your Custom desktop, you may need 3 or 4 Dogbone bolts. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...

  • Page 17: Keypad Lock

    4. Hold the DOWN button until the desktop lowers slightly, then raises slightly, and the display changes back to the numeric height setting, then release. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...

  • Page 18: Display Units

    To set new minimum and maximum height settings outside of the current settings, you will need to first remove the current minimum and maximum settings. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com...

  • Page 19: Troubleshooting

    If the error message persists after performing the Reset procedure, or if there is a height difference between the legs which exceeds 1.5’’, contact UPLIFT Desk at the email address or phone numbers listed at the bot- tom of each page of these instructions.
  • Page 20 Copyright Notice: This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide ©...

Table of Contents