Drain Hose; Info Light (Selected Models) - Bosch SHP65TL5UC Repair Instructions

11. Reinstall heat / drain pumps and drain hose.

12. Install parts into top of sump, including suction cap and

drain pump cover.

CAUTION: Tank edges are sharp! Use gloves, cover

tank edges and install sump carefully.

5.16

5.16.1 Removing drain hose

Tools needed: #2 Phillips & small flat blade screwdrivers.

1. Disconnect & pull out dishwasher – section 5.1.5.1.

2. Remove water valve – section 5.5.1. Don't completely

remove the valve, just remove the valve and support

from the base so the hose can slide out.

3. Pull drain hose out from water level control (below left).

4. Slide the drain hose to the right to remove it from the base

(below right). The hose is notched to be held by the base

and can't be pulled straight out.

702_58300000170749_ara_en_c

This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary

information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.

5.16.2 Removing sump drain hose

Tools needed: #2 Phillips & small flat blade screwdrivers.

1. Disconnect & pull out dishwasher – section 5.1.5.1.

2. Pull out the drain hose w/ O-ring from the sump (below

left) and from the water level control (below right).

5.17

Tools needed: T20 Torx & small flat blade screwdrivers.

1. Remove outer door – section 5.1.2.1.

2. Disconnect wire harness from info light.

3. Remove the info light by carefully snapping it out from the

right hinge plate.

Page 59 of 82