Yamatake SDC10 Series Manual
  1. Manuals
  2. Brands
  3. Yamatake Manuals
  4. Controller
  5. SDC10 Series
  6. Manual

Yamatake SDC10 Series Manual

Digital controller sio driver
Hide thumbs Also See for SDC10 Series:

Quick Links

Digital Controller SIO
Driver
1
System Configuration....................................................................................................... 3
2
Selection of External Device ............................................................................................ 8
3
Example of Communication Setting ................................................................................. 9
4
Setup Items .................................................................................................................... 65
5
Cable Diagram ............................................................................................................... 70
6
Supported Device......................................................................................................... 103
7
Device Code and Address Code.................................................................................. 114
8
Error Messages............................................................................................................ 116
1
Yamatake Corporation
loading

Related Manuals for Yamatake SDC10 Series

Summary of Contents for Yamatake SDC10 Series

  • Page 1: Table Of Contents

    Yamatake Corporation Digital Controller SIO Driver System Configuration....................... 3 Selection of External Device .................... 8 Example of Communication Setting ................. 9 Setup Items ........................65 Cable Diagram ....................... 70 Supported Device......................103 Device Code and Address Code.................. 114 Error Messages......................116...
  • Page 2 Digital Controller SIO Driver PREFACE This manual describes how to connect the Display and the External Device (target Controller). In this manual, the connection procedure will be described by following the below sections: System Configuration "1 System Configuration" (page 3) This section shows the types of External Devices which can be connected and SIO type.

  • Page 3: System Configuration

    Digital Controller SIO Driver System Configuration The system configuration in the case when the External Device of Yamatake Corporation and the Display are connected is shown. Setting Cable Series Link I/F SIO Type Example Diagram Setting " Cable Terminal block on...
  • Page 4 Digital Controller SIO Driver Setting Cable Series Link I/F SIO Type Example Diagram Setting " Cable Terminal block on C40B RS232C Example 13 Diagram 1" the controller (page 33) (page 70) Setting " Cable RS422/485(4 SDC40B Example 14 Diagram 2" wire) (page 35) (page 71)
  • Page 5 Digital Controller SIO Driver Connection Configuration [Connection example 1:n] Display Controller [Connection example 1:n When using COM1 or COM2] Controller Controller Controller Display [Connection example 1:n When using COM1 and COM2] Controller Controller Controller COM1 COM2 Display Controller Controller Controller You can connect maximum 16 units of External Device.
  • Page 6 Digital Controller SIO Driver COM Port of IPC When connecting IPC with External Device, the COM port which can be used changes with series and SIO type. Please refer to the manual of IPC for details. Usable port Usable port Series RS-232C RS-422/485(4 wire)
  • Page 7 Digital Controller SIO Driver Dip switch setting: RS-422/485 (4 wire) Dip switch Setting Description Reserve (always OFF) SIO type: RS-422/485 Output mode of SD (TXD) data: Always output Terminal resistance (220Ω) insertion to SD (TXD): None Terminal resistance (220Ω) insertion to RD (RXD): None Short-circuit of SDA (TXA) and RDA (RXA): Does not Exist Short-circuit of SDB (TXB) and RDB (RXB): Does not Exist RS (RTS) Auto control mode: Disable...

  • Page 8: Selection Of External Device

    Setup Items Setup Description Maker Select the maker of the External Device to be connected. Select "Yamatake Corporation". Select a model (series) of the External Device to be connected and connection method. Select "Digital Controller SIO". Check the External Device which can be connected in "Digital Controller SIO" in system Driver configuration.

  • Page 9: Example Of Communication Setting

    Digital Controller SIO Driver Example of Communication Setting Examples of communication settings of the Display and the External Device, recommended by Digital Electronics Corp., are shown. Setting Example 1 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. •...
  • Page 10 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 11 Digital Controller SIO Driver Setting Example 2 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 12 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, mode key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 13 Digital Controller SIO Driver Setting Example 3 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 14 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 15 Digital Controller SIO Driver Setting Example 4 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 16 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 17 Digital Controller SIO Driver Setting Example 5 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 18 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 19 Digital Controller SIO Driver Setting Example 6 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 20 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, mode key, enter key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 21 Digital Controller SIO Driver Setting Example 7 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 22 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ENT key, DISP key, MODE key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 23 Digital Controller SIO Driver Setting Example 8 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 24 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ENT key, DISP key, MODE key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 25 Digital Controller SIO Driver Setting Example 9 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 26 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, mode key, enter key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 27 Digital Controller SIO Driver 3.10 Setting Example 10 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 28 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 29 Digital Controller SIO Driver 3.11 Setting Example 11 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 30 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 31 Digital Controller SIO Driver 3.12 Setting Example 12 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 32 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 33 Digital Controller SIO Driver 3.13 Setting Example 13 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 34 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 35 Digital Controller SIO Driver 3.14 Setting Example 14 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 36 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 37 Digital Controller SIO Driver 3.15 Setting Example 15 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 38 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 39 Digital Controller SIO Driver 3.16 Setting Example 16 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 40 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 41 Digital Controller SIO Driver 3.17 Setting Example 17 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 42 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 43 Digital Controller SIO Driver 3.18 Setting Example 18 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 44 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the ladder software for communication setting of the External Device. (Operation confirmed using SLP-D10 V3.0.1) Set the device address of the External Device with the rotary switch on the front of the Controller.
  • Page 45 Digital Controller SIO Driver 3.19 Setting Example 19 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 46 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the FUNC key, PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 47 Digital Controller SIO Driver 3.20 Setting Example 20 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 48 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the FUNC key, PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 49 Digital Controller SIO Driver 3.21 Setting Example 21 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 50 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the FUNC key, PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 51 Digital Controller SIO Driver 3.22 Setting Example 22 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 52 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the FUNC key, PARA key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 53 Digital Controller SIO Driver 3.23 Setting Example 23 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 54 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 55 Digital Controller SIO Driver 3.24 Setting Example 24 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 56 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 57 Digital Controller SIO Driver 3.25 Setting Example 25 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 58 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 59 Digital Controller SIO Driver 3.26 Setting Example 26 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 60 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 61 Digital Controller SIO Driver 3.27 Setting Example 27 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 62 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.
  • Page 63 Digital Controller SIO Driver 3.28 Setting Example 28 Setting of GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings ] from [System setting window] in workspace. GP-Pro EX Device/PLC Connection Manual...
  • Page 64 Digital Controller SIO Driver Device Setting To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific Settings] of [Device/PLC Settings]. Settings of External Device Use the PROG key, RUN/HOLD key, SETUP key, ENT key, DISP key, down key and up key in front of the Controller for communication settings of the External Device.

  • Page 65: Setup Items

    Digital Controller SIO Driver Setup Items Set communication settings of the Display with GP-Pro Ex or in off-line mode of the Display. The setting of each parameter must be identical to that of External Device. "3 Example of Communication Setting" (page 9) Setup Items in GP-Pro EX Communication Settings To display the setting screen, select [Device/PLC Settings] from [System setting window] in workspace.
  • Page 66 Digital Controller SIO Driver Setup Items Setup Description In case of no response from the External Device, use an integer from 0 to 255 to enter how Retry many times the Display retransmits the command. Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving Wait To Send packets to transmitting next commands.
  • Page 67 Digital Controller SIO Driver Settings in Off-Line Mode • Please refer to Maintenance/Troubleshooting for more information on how to enter off-line mode or about operation. Maintenance/Troubleshooting "2.2 Offline Mode" Communication Settings To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in the off-line mode.
  • Page 68 Digital Controller SIO Driver Setup Items Setup Description Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving Wait To Send packets to transmitting next commands. Device Setting To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the External Device you want to set from the displayed list, and touch [Device Settings].
  • Page 69 Digital Controller SIO Driver Setup Items Setup Description Switches RI/VCC of the 9th pin. RI/VCC It is necessary to change RI/5V by changeover switch of IPC when connect with IPC. Please refer to the manual of the IPC for more detail. GP-Pro EX Device/PLC Connection Manual...

  • Page 70: Cable Diagram

    Digital Controller SIO Driver Cable Diagram The cable diagram shown below may be different from the cable diagram recommended by Yamatake Corporation. Please be assured there is no operational problem in applying the cable diagram shown in this manual. •...
  • Page 71 Digital Controller SIO Driver Cable Diagram 2 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) Your own cable Your own cable Online adapter by Pro-face Cable length: CA4-ADPONL-01 500m or less...
  • Page 72 Digital Controller SIO Driver A. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Terminal Terminal resistance Controller resistance Terminal block (more than (more than Shield Signal name Signal name 1/2W)
  • Page 73 Digital Controller SIO Driver • 1:n Connection Terminal Controller Controller resistance Terminal Terminal block Terminal block D-Sub 9 Pin (socket) resistance Shield Shield (more than Signal name Signal name Signal name (more than 1/2W) 1/2W) Display Terminal Terminal resistance resistance (more than (more than 1/2W)
  • Page 74 Digital Controller SIO Driver D. When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 Connection Terminal D-Sub 9 Pin (plug) Controller resistance Terminal Signal name Terminal block resistance (more than Shield TERMRX Signal name 1/2W) (more than 1/2W) Display...
  • Page 75 Digital Controller SIO Driver Cable Diagram 3 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) Your own cable Your own cable Online adapter by Pro-face CA4-ADPONL-01 Terminal block conversion adapter by Pro-face CA3-ADPTRM-01...
  • Page 76 Digital Controller SIO Driver A. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Terminal Controller resistance Terminal Terminal block resistance (more than Signal name Signal name Shield 1/2W) (more than...
  • Page 77 Digital Controller SIO Driver B. When self-made cable is used • 1:1 Connection Terminal Controller resistance Terminal D-Sub 9 Pin (socket) Terminal block resistance (more than Signal name Signal name Shield 1/2W) (more than 1/2W) Display Shell • 1:n Connection Terminal Controller Controller...
  • Page 78 Digital Controller SIO Driver C. When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM- 01) by Pro-face and your own cable • 1:1 Connection Terminal Controller resistance Terminal Terminal block resistance (more than Signal name Signal name Shield (more than 1/2W)
  • Page 79 Digital Controller SIO Driver D.When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 Connection Terminal D-Sub 9 Pin (plug) Controller resistance Terminal Signal name Terminal block resistance (more than TERMRX Signal name Shield (more than 1/2W) 1/2W) Display...
  • Page 80 Digital Controller SIO Driver E. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Terminal Terminal Controller Controller resistance resistance Terminal Terminal Terminal block Terminal block resistance resistance (more than...
  • Page 81 Digital Controller SIO Driver F. When self-made cable is used • 1:1 Connection Terminal resistance Controller Terminal Terminal block D-Sub 9 Pin (socket) resistance (more than Signal name Signal name Shield 1/2W) (more than DATA+ 1/2W) DATA- Display GND SG Shell •...
  • Page 82 Digital Controller SIO Driver Cable Diagram4 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) Your own cable Your own cable Online adapter by Pro-face CA4-ADPONL-01 Terminal block conversion adapter by Pro-face CA3-ADPTRM-01 Cable length:...
  • Page 83 Digital Controller SIO Driver A. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Signal name Shield Controller Terminal block Display Signal name CA3-ADPCOM-01 CA3-ADPTRM-01 TERM Your own cable •...
  • Page 84 Digital Controller SIO Driver B. When self-made cable is used • 1:1 Connection D-Sub 9 Pin (socket) Signal name Shield Controller Terminal block Signal name Display Shell • Termination resistance is not necessary. • 1:n Connection D-Sub 9 Pin (socket) Signal name Shield Controller...
  • Page 85 Digital Controller SIO Driver C. When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM- 01) by Pro-face and your own cable • 1:1 Connection Signal name Shield Controller Terminal block Display Signal name CA4-ADPONL-01 CA3-ADPTRM-01 TERM Your own cable •...
  • Page 86 Digital Controller SIO Driver D. When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 Connection D-Sub 9 Pin (plug) Signal name TERMRX Shield Controller CA4-ADPONL-01 Terminal block Display Signal name TERMTX Shell Your own cable •...
  • Page 87 Digital Controller SIO Driver E. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Controller Terminal block Signal name Signal name Shield Display CA3-ADPCOM-01 CA3-ADPTRM-01 TERM Your own cable •...
  • Page 88 Digital Controller SIO Driver F. When self-made cable is used • 1:1 Connection Controller Terminal block D-Sub 9 Pin (socket) Signal name Signal name Shield DATA+ DATA- Display GND SG Shell • Termination resistance is not necessary. • 1:n Connection Controller Controller Shield...
  • Page 89 Digital Controller SIO Driver Cable Diagram5 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) Your own cable Your own cable Online adapter by Pro-face CA4-ADPONL-01 Terminal block conversion adapter by Pro-face CA3-ADPTRM-01 Cable length:...
  • Page 90 Digital Controller SIO Driver A. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Terminal resistance Terminal Signal name Shield (more than Controller resistance 1/2W) Terminal block Display (more than CA3-ADPCOM-01...
  • Page 91 Digital Controller SIO Driver B. When self-made cable is used • 1:1 Connection Terminal D-Sub 9 Pin (socket) resistance Terminal Signal name Shield (more than Controller resistance Terminal block 1/2W) (more than Signal name 1/2W) Display Shell • 1:n Connection Terminal D-Sub 9 Pin (socket) resistance...
  • Page 92 Digital Controller SIO Driver C. When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM- 01) by Pro-face and your own cable • 1:1 Connection Terminal resistance Terminal Signal name Shield (more than Controller resistance 1/2W) Terminal block Display (more than CA4-ADPONL-01...
  • Page 93 Digital Controller SIO Driver D. When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 Connection D-Sub 9 Pin (plug) Terminal resistance Signal name Terminal TERMRX Shield (more than Controller resistance 1/2W) Display Terminal block (more than Signal name 1/2W) CA4-ADPONL-01...
  • Page 94 Digital Controller SIO Driver E. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Terminal Controller Terminal resistance resistance Terminal block (more than Signal name Signal name Shield (more than 1/2W)
  • Page 95 Digital Controller SIO Driver F. When self-made cable is used • 1:1 Connection Terminal Controller resistance Terminal Terminal block D-Sub 9 Pin (socket) resistance (more than Signal name Signal name Shield (more than 1/2W) DATA+ 1/2W) DATA- Display GND SG Shell •...
  • Page 96 Digital Controller SIO Driver Cable Diagram6 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) Your own cable Your own cable Online adapter by Pro-face CA4-ADPONL-01 Terminal block conversion adapter by Pro-face CA3-ADPTRM-01 Cable length:...
  • Page 97 Digital Controller SIO Driver A. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Signal name Shield Controller Terminal block Display CA3-ADPCOM-01 Signal name CA3-ADPTRM-01 TERM Your own cable •...
  • Page 98 Digital Controller SIO Driver B. When self-made cable is used • 1:1 Connection D-Sub 9 Pin (socket) Signal name Shield Controller Terminal block Signal name Display Shell • Termination resistance is not necessary. • 1:n Connection D-Sub 9 Pin (socket) Signal name Shield Controller...
  • Page 99 Digital Controller SIO Driver C. When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM- 01) by Pro-face and your own cable • 1:1 Connection Signal name Shield Controller Terminal block Display CA4-ADPONL-01 Signal name CA3-ADPTRM-01 TERM Your own cable •...
  • Page 100 Digital Controller SIO Driver D. When using the online adapter (CA4-ADPONL-01) by Pro-face and your own cable • 1:1 Connection D-Sub 9 Pin (plug) Signal name TERMRX Shield Controller Display Terminal block Signal name CA4-ADPONL-01 TERMTX Shell Your own cable •...
  • Page 101 Digital Controller SIO Driver E. When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face and your own cable • 1:1 Connection Controller Terminal block Signal name Signal name Shield Display CA3-ADPCOM-01 CA3-ADPTRM-01 TERM Your own cable •...
  • Page 102 Digital Controller SIO Driver F. When self-made cable is used • 1:1 Connection Controller D-Sub 9 Pin (socket) Terminal block Signal name Signal name Shield DATA+ DATA- Display GND SG Shell • Termination resistance is not necessary. • 1:n Connection Controller Controller D-Sub 9 Pin (socket)

  • Page 103: Supported Device

    Digital Controller SIO Driver Supported Device Range of supported device address is shown in the table below. Please note that the actually supported range of the devices varies depending on the External Device to be used. Please check the actual range in the manual of your External Device.
  • Page 104 Digital Controller SIO Driver SDC15/SDC25/SDC26/SDC35/SDC36 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00273.0-31243.F 00273-31243 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 105 Digital Controller SIO Driver SDC20/SDC21 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 0301.0-0690.F 0301-0690 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 106 Digital Controller SIO Driver SDC30/SDC31 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00501.0-06049.F 00501-06049 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 107 Digital Controller SIO Driver SDC40A This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00501.0-06100.F 00501-06100 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 108 Digital Controller SIO Driver SDC40B This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00501.0-08902.F 00501-08902 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 109 Digital Controller SIO Driver SDC40G This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00501.0-06100.F 00501-06100 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 110 Digital Controller SIO Driver DMC10 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 01001.0-07806.F 01001-07806 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 111 Digital Controller SIO Driver DCP31/DCP32 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00501.0-04600.F 00501-04600 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 112 Digital Controller SIO Driver 6.10 DCP551 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00256.0-01712.F 00256-01712 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.
  • Page 113 Digital Controller SIO Driver 6.11 DCP552 This address can be specified as system data area. Device Bit Address Word Address 32 bit Remarks Data 00256.0-02003.F 00256-02003 When you write the bit address, the Display reads the word address corresponding to that of the External Device first.

  • Page 114: Device Code And Address Code

    Digital Controller SIO Driver Device Code and Address Code Use device code and address code when you select "Device Type & Address" for the address type in data displays. Address of the External Device is configured as follows. SDC10 Device Code Device Device Name Address Code...
  • Page 115 Digital Controller SIO Driver SDC40G Device Code Device Device Name Address Code (HEX) Data 0080 Word Address DMC10 Device Code Device Device Name Address Code (HEX) Data 0080 Word Address DCP31/DCP32 Device Code Device Device Name Address Code (HEX) Data 0080 Word Address 7.10...

  • Page 116: Error Messages

    Digital Controller SIO Driver Error Messages Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message(Error Occurrence Area)". Each description is shown below. Item Requirements Error No. Name of External Device where error occurs. Name of External Device is a title of Device Name External Device set with GP-Pro EX.(Initial value[PLC1]) Error Message...

This manual is also suitable for:

Sdc15 seriesSdc20 seriesSdc21 seriesSdc25 seriesSdc26 seriesSdc30 series ... Show all