Disassembly Instructions; Removal Of Mechanical Parts And P.c. Boards - Sanyo DP19640 Service Manual
Hide thumbs
Also See for DP19640:
- Owner's manual (30 pages) ,
- Service manual (49 pages) ,
- Service manual (45 pages)
Table of Contents
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
CAUTION
Be careful not to remove the LVDS cable forcibly, because
the LVDS cable may be damaged.
1-1: STAND ASS'Y (Refer to Fig. 1-1)
1. Remove the 2 screws (1).
2. Remove the Stand Ass'y in the direction of arrow.
(1)
1-2: BACK CABI ASS'Y (Refer to Fig. 1-2)
1. Remove the 6 screws (1).
2. Remove the back cabi ass'y in the direction of arrow.
(1)
(1)
DISASSEMBLY INSTRUCTIONS
(1)
Stand Ass'y
Fig. 1-1
(1)
(1)
(1)
(1)
Back cabi ass'y
(3)
Fig. 1-2
1-3: MAIN PCB and REMOCON PCB
(Refer to Fig. 1-3)
1. Disconnect the following connector:
(CD2801, CP3001, CP4301 and CP6204).
2. Remove the 6 screws (1).
3. Remove the Main PCB in the direction of arrow (A).
4. Remove the screw (2).
5. Remove the Remocon PCB in the direction of arrow (B).
(1)
(1)
1-4: POWER PCB (Refer to Fig. 1-4)
1. Disconnect the following connector:
(CP7001 and CP7002).
2. Remove the 7 screws (1).
3. Remove the Power PCB in the direction of arrow.
B1-1
B1-1
(1) (1)
(1)
(1)
Main PCB
(2)
(A)
Remocon PCB
(B)
Fig. 1-3
(1)
(1)
(1)
(1)
(1)
(1)
(1)
POWER PCB
Fig. 1-4
Table of Contents
