Dormakaba TENSOR Double-Acting Hinge Installation Instructions Manual
Dormakaba TENSOR Double-Acting Hinge Installation Instructions Manual

Dormakaba TENSOR Double-Acting Hinge Installation Instructions Manual

Frame mount

Quick Links

TENSOR Double-Acting Hinge
Frame mount
Installation instructions
812002 – 01-2018
| EN |
Table of Contents
loading

Summary of Contents for Dormakaba TENSOR Double-Acting Hinge

  • Page 1 TENSOR Double-Acting Hinge Frame mount Installation instructions 812002 – 01-2018 | EN |...
  • Page 2: Table Of Contents

    TENSOR - Frame Mount Installation Instructions Table of Contents Table of contents 1  Technical specifications Overview 1.1.1 General information 1.1.2 Intended use 1.1.3 Glass requirements/fittings/mounting 1.1.4 Requirements for glass panel 1.1.5 Safety instructions 1.1.6 Symbols used - Safety/Installation 1.1.7 Maintenance, care, repair 1.1.8 Disposal...
  • Page 3: Technical Specifications

    WARNING • dormakaba glass hardware is not suitable for harsh environment; for example, applications where chemicals (e.g. Risk of breaking glass. When installing the door, chlorine) are used such as indoor swimming pools, saunas, or support the door panel with a block of wood or similar salt-water pools.
  • Page 4: Application - Frame Mount

    TENSOR - Frame Mount Installation Instructions Applications 2 Application - Frame mount Fig 1 Double- acting hinge 1/8” Gaskets [x4 each] 1/8” 1/8” 1/32” [1] 1/16” [2] 1/8” [3] 1/4” Cover Wall M6x12 M8x16 plate flat head flat head...
  • Page 5: Installation Instructions - Frame Mount

    TENSOR - Frame Mount Installation Instructions Frame mount - disassemble Frame mount - recessed mounting plate 3 Installation instructions - frame mount Prep door frame, disassemble and prep hinge Fig 2 Gasket size reference chart Glass height Glass width...
  • Page 6: Secure Hinge To Frame

    TENSOR - Frame Mount Installation Instructions Frame mount - secure hinge to frame Frame mount - install door Door stops Secure hinge to frame Fig 4 M8x16 Hex key size TENSOR 3.3.1 Secure recessed mounting plate to frame. •...
  • Page 7: Adjustments

    TENSOR - Frame Mount Installation Instructions Adjustments Cover caps 4 Adjustments Adjust door to “0” position Fig 7 Hex key size TENSOR Adjustment screws NOTE: Ideal “0” position 4.1.1 Remove all setting blocks. 4.1.3 Tighten adjustment screws 4.1.2 Bring door panel to ideal “0” position. See image (2x upper hinge and 2x lower hinge).
  • Page 8 USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...

Table of Contents