Panasonic Switch-M8eGi Product Specification

Model

Switch-M8eGi

Name

Model

PN28080i-ID

No.

1. Summary

Switch-M8eGi is an all Giga bit Ethernet Layer 2 Switching Hub with management function having 8 ports of

10/100/1000BASE-T and SFP extension slot.

2. Feature

（1） Has wire speed layer 2 switching functions.

（2） Ports 1 to 8 are auto negotiation-ready 10/100/1000BASE-T ports. Their speed and communication mode can be changed

by configuration. Port 9 can be exclusively used as an SFP extension slot.

（3） All twisted pair ports support straight/cross cable auto sensing function. Simply connect devices with straight cables,

whether it is a terminal or a network device.(This function does not work if the port communication configuration is set at

Fixed or Link Aggregation. Ports 1 to 8 are set at MDI-X. (default))

（4） Due to the loop detection/shutoff function, a port where loop has occurred can be automatically shut off to prevent loop

failures. When a port is shut off and recovered automatically, SNMP trap can be sent to notify the incident to the

administrator. Moreover, the port with a loop can be identified by loop notification on the LEDs on the main unit and referring

the history of loop on the setting screen.

（5） Has a loop detection history function, which notifies when a loop occurs with the corresponding LED and enables a network

administrator to identify the looped port after the loop is removed.

（6） Fanless design solves noise problem or fan failure.

（7） Power consumption can be suppressed by switching off the port LEDs (left) via the ECO mode LED functions.

（8） The IEEE802.1p compatible QoS function is supported.

（9） Has an Internet Mansion function, which ensures security between each door.

（10） Has a port grouping function, which groups ports that are allowed to communicate with one another to limit communications

between different groups.

（11） Equipped with energy efficient Ethernet （EEE） conforming to IEEE802.3az（LPI）. When there is no data transmission at link

up, the energy-saving state automatically starts so that power consumption can be reduced on each port.

Factory default : Disable

（12） Embedded power saving mode detects the connection status automatically and saves power consumption to minimum.

Factory default : Disable

（13） VLAN function allows free grouping of up to 256 VLANs.

（14） IEEE802.1Q VLAN tagging is supported, and a maximum of 256 VLANs can be registered.

（15） The IEEE802.1X compatible user authentication function （EAP-MD5/TLS/PEAP） is supported.

（16） Each single port supports IEEE 802.1X, Web, and MAC authentication protocols, eliminating the need for individually

setting the ports' authentication parameters.

（17） Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.

Date issued

Date revised

Product Specification

May. 26, 2020

Panasonic Life Solutions Networks Co., Ltd.

401-28080i-ID-SP01

Page 1 of 13